Compare Cell Contents With Given Range Of Contents

Dec 30, 2013

I have attached a workbook stating my problem.

file1.xlsx‎

View 10 Replies


ADVERTISEMENT

Compare Cell Contents In Different Columns Then Fill Neighbouring Cells

Jun 9, 2014

I have two sheets:
- sheet 1 ('current')
- sheet 2 ('31May')

The data in column C is the same, although sorted differently and can't be re-sorted to be the same. Where the data in column C is the same in both sheets, I want to fill columns A and B into sheet 1.

View 4 Replies View Related

Return Contents Of 1 Cell Based On Contents Of Another Cell?

Mar 12, 2014

I thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.

View 3 Replies View Related

Referencing A Cell's Contents As Range()

May 14, 2007

I'm trying to figure out the best way to reference a cell's contents as a range in VBA code. So essentially it would be simple like this (except of course this doesn't work)... Range("cell(contents,A1)").Select

I always look in my CD of old forum posts, Mr. Excel articles, Mr. Excel books I have etc. before I break down and ask.

View 9 Replies View Related

VBA With Range() To TRIM() Cell Contents

Jan 27, 2010

I have column headings that come in through a file upload and for some reason some of the column headings(which are in cells in row1) have extra spaces in the middle of them and at the end of the word. This messes up some of my later coding when trying to find specific header names.

Example:
"Location " - has extra 2 spaces at end, should be "Location"
"Read (Only)" - has 3 spaces in middle, should be "Read (Only)"

I came up with this piece of code to quickly correct the bad headers by Trim()'g the contents of each cell, but it's error'g out & not sure how to fix it:

With Range("A1:A24")
.Value = Trim(.Value)
End With
It errors of course on the '.Value' line.

View 9 Replies View Related

Compare Two Spreadsheets Altering 2nd One Based On Contents Of The First

Jul 6, 2007

I have a master spreadsheet containing 4 relevant fields, 'Manufacturer', 'Product', 'Version' and 'Type'. This contains all possible variations of 'manufacturer', 'product' and 'version' that can occur in the organisation.
The type field shows how the particular item is going to be processed, either 'automated', 'manual' or 'non'

This is a computer generated spreadsheet, apart from the 'Type' field which we've entered for each one individually, as are the user spreadsheets which dont yet have the 'type' field.

This is a large list of around 7000 items

I then have a multiple spreadsheets (one for each user, totaling around 1200) that has a list of a couple of hundred items that are relevant to the user which contains 'manufacturer', 'product' and 'version'.

i need to sort these out quickly by comparing the sheet to the master spreadsheet so where 'manufacturer', 'product' and 'version' match up with the masters record it automatically removes the the 'non' type of item from the user sheet and placing either 'automated' or 'manual' in a new 'type' filed where appropriate

View 3 Replies View Related

Automatically Clear Contents Of Cell Range

Jan 17, 2013

Is is possible to clear the contents of a cell range if a message box appears stating an error. I have tried the following code but the logic doesn't actually work and am struggling to achieve what I am trying to do.

My code so far is as follows:

Code:

If ActiveSheet.Range("F84") > 0 And ThisWorkbook.Worksheets("PES").Range("D24") = 0 Then _
MsgBox "Your Entitlement is currently 0", vbCritical, "Error"
ActiveSheet.Range("K84:T84").ClearContents

The message box appears fine if the IF statement is true but if IF statement is false, the cell range of K84 to T84 on the current sheet is still cleared..

View 2 Replies View Related

Combine Cell Contents With Named Range?

Aug 8, 2013

I have a cell with a drop-down menu where the user can select "Plant A" or "Plant B".

I have a cell below that with a sales number, which comes from a different tab where the sales number is input and has a named range.

For example, the input tab has a named range called "Plant A Sales" and a value of 1234, and a named range called "Plant B Sales" with a value of 5678.

I want to put a formula in a cell that will look at the cell where the drop-down menu is and will populate that cell with the correct data for the selected plant.

So if the user selects "Plant A" from the drop-down menu, the cell will show "1234". If they then select "Plant B" from the drop-down menu, the cell will show "5678".

View 1 Replies View Related

LOOKUP Range Based On Contents Of A Cell

Aug 24, 2006

I want to be able to send out one master workbook with the fourteen ranges, and use a pull-down list (or anything else) so when the user selects a state, the proper lookup range will be used. In the attached abbreviated example, I want the lookups in Column B to refer to the state designated in B2. In this case, the VLOOKUP works correctly, since Colorado zip codes are in the ColZip range.

The people in Idaho or Oregon using this will only be working with their respective zip codes in ranges IdaZip or OreZip, so if they enter their state in B2, I would like the VLOOKUP to look in a different range. My whole idea is to only have one master workbook so I dont have to create one for each district office. Maybe Im thinking in a wrong direction altogether.

View 3 Replies View Related

Combine Contents Of Two Cells Depending On Contents Of Another?

Jan 14, 2013

I am trying to combine the contents of two cells depending on the contents of another, I have tried to use the If function but am coming up stuck!

I have provided a link to the example file below:

[URL]

View 4 Replies View Related

Insert Contents Of A Cell Range Into A Single Comment

Feb 15, 2009

I would like to Insert the contents of a Range of Cells into a single Comment. ie:
The contents of Range A1:A50 into a Comment placed at F1. Is there a Macro that will do this?

View 3 Replies View Related

Clear The Contents Of Each Cell In A Range Without Losing Formulas

Dec 6, 2006

Is there a way to clear the contents of each cell in a range without losing formulas?

View 9 Replies View Related

Conditional Formatting Look At The Cell Contents And Check If The Value Exists In A Range

Oct 17, 2008

I am trying to set up a conditional formatting which will look at the cell contents and check if the value exists in a range.

The range to compare will be over multiple columns and multiple rows.

View 10 Replies View Related

Display Named Range Contents Based On Text In Cell

Aug 24, 2009

I have some dynamic named ranges in sheet1, and in sheet2 I have data validation dropdown list which has the names of all the DNR's in it.

What I want it to do (in sheet3, no less) is for the user to be able to pick a named range from the dropdown list, and have a particular column in sheet3 then display that entire named range.

I have made a 'data' worksheet which is the source for the data validation in sheet2. Each item in the list identically matches the name of each of the named ranges. I was hoping to be able to use some form of =INDIRECT but alas, no such luck.

So it's almost like a copy and paste function I'm after, where:

If you pick "Schedule_From" out of the DD-list, then DNR 'Schedule_From' is what is pasted in Column B in Sheet3.

DON'T want to use a PivotTable.

View 9 Replies View Related

Sum Contents Of A Row Within A Moving Range

Nov 1, 2007

I have Cloumn A with names of staff going down a2, a3, a4 etc

In Row 1 I have dates running from left to right

Within the table itself I insert a 1 when an agent is late for their shift

How do I get cloumn B to look across the top of row 1 and count 4 weeks before Todays date and use that as its range.

I'm sorry I can't post the sheet from work PC - No Colo on here

View 9 Replies View Related

"if Any" Function Or Similar: Check A Range Of Cells (B4:B35) And See If Any Of The Contents Are Less Than A Specified Cell (M1) And Then Show A Message

Oct 7, 2006

I need to check a range of cells (B4:B35) and see if any of the contents are less than a specified cell (M1) and then show a message, (the message part I can do). I have tried using For Each but I then get the message for every cell that is below the specified cell (which in theory could be all of them). I have also tried using an If Any statement but didnt work.

View 5 Replies View Related

Returning The Contents Of A Non-empty Cell In A Range Of Empty Cells

Jan 8, 2008

I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?

I would do this with a series of nested IF statements if there weren't more than 30 of them!

View 9 Replies View Related

Clear Contents Of Cells In A Range, LEN=0

Dec 23, 2009

I'm using a macro to copy the results of a formula and paste the values only on another sheet. The result includes lots of "blank" rows. I have another macro to get rid of the empty rows and move the information up.

It's not working because the "blank" rows aren't empty. Even though I paste values only, experimentation shows that the cells that appear blank return a false to the ISBLANK test with a length of 0.

So now I think I need a macro to run after the pastespecial command to look for cells within a range with a length of zero and delete the contents of those cells, but leave alone anything with a length of >0.

I am brand new to the idea of using VBA, but I have successfully cobbled together some stuff and can usually modify things to work.

It seems I need to maybe use some sort of IF statement along with a LEN and ClearContents. I don't want to delete the blank cells, just make them truly empty so that all of my actual data stays where it should, and my delete empty rows macro works correctly.

I did a search and see some info on clearing contents of columns or rows, or clearing contents based on the content of other columns or rows, but I'm unsure of how to tell it to search each cell within a range and clear the contents of 0-length cells to make them truly empty.

View 10 Replies View Related

Set A Range And Copy Contents To Another Worksheet

Jul 7, 2006

I have a workbook with lets say 10 sheets. 9 of the 10 sheets are identical as far as layout, they just hold different information for different employees. I need to get a range of cells that are NOT empty and copy that data to the 1 different sheet (summary page). A6 through A25 is where the data is going to be, but all those cells may not be filled up, so I want to drop the empty cells from the range. So If only A6-A15 are filled, then those are the only ones that get copied.
ALSO (dont you love that) I need to take that number range and have columns A, F and I as well. So if I have A6-A15, I will need the data out of F6-F15 as well.

View 4 Replies View Related

Clear Contents Based Upon Value In Row Range

Jul 21, 2006

I'm trying clear the contents of a column range when the cell above this column range is empty. I know how to do this for one cell, but I would like it to work for a rangefrom R15:BB15.

If IsEmpty(Range("r15")) Then
Range("r16:r35").Select
Selection.ClearContents
End If

End Sub

View 5 Replies View Related

Clear Contents Of Filtered Range

Jan 10, 2007

I am filtering column S in a sheet to show all rows with a date after the end of the previous month - i.e. >= 01/01/07. What i want to do is clear the contents of those visible cells in column S. I tried the code below (got it on this site) but it works its way up from the bottom of the sheet until it finds the first visible row and then clears the contents of column S in each row above it, whether it is visible or not.

Sheets("Planning").Select
With Range("e2:C2")
.AutoFilter field:=5, Criteria1:="<=" & Sheets("Filtered Statistics").Range("c3")
.AutoFilter field:=19, Criteria1:=">=" & Sheets("Filtered Statistics").Range("d3")
For i = Range("s65536").End(xlUp).Row To 3 Step -1
If InStr(1, ">=" & Sheets("Filtered Statistics").Range("d3"), Cells(i, 19).Value) = 0 Then
Cells(i, 19).ClearContents
End If
Next i
.AutoFilter field:=19
End With

View 2 Replies View Related

Change Formula Range Without Changing The Contents?

Aug 21, 2012

I'm using the formula =SUMIF(F18:F18,"LY",G18:G18), =SUMIF(F18:F18,"KT",G18:G18), and so on.

I want to change the range to: =SUMIF(F7:F18,"LY",G7:G18), =SUMIF(F7:F18,"KT",G7:G18), and so on.

I can do it manually, but it's 20 rows.

Is there a way where i can change the formula range on the first and copy it down, without also copying the initials, (etc. "LY") ?

View 9 Replies View Related

VBA To Filter Data Based On Contents Of Range

Apr 24, 2014

I'm trying to add a line of code to filter some data based on a date in the range cell C3.

This is my code;

[Code] ....

It doesn't seem to work.

View 4 Replies View Related

Clear Contents Of Column In Range Variable?

Feb 11, 2014

I have a range variable named data I want to clear all the data in the 3rd column in the range variable I know how to reference a single location in the range variable but not a whole column. see example code below

[Code] .....

View 3 Replies View Related

Clear Contents Of Named Range In 2007

Jan 4, 2009

I want to have users fill out. While it is possible to have it Read Only so that they always SaveAs I would rather put in a macro to clear the user input fields. I have done this in Excel 2003 and when I try using the same techniques in 2007 I get an Error 400.

I have all the cells (some are merged cells) in a named range and have the following code for clearing them.

View 3 Replies View Related

Add And Name Sheets Based On Range Contents From Different Sheet

Mar 13, 2013

I've got a spreadsheet with a 'data' sheet and I want to add and name additional sheets based on the contents of a range in the 'data' sheet - it could be 1 extra sheet, it could be 100, the range is open ended.

View 3 Replies View Related

Clear Contents Of Range Based Upon Values

Dec 17, 2007

There is data(numerical) or blanks in each of the cells in the range H32:O37

I want to clear the contents if they are a duplicate of the previous line.

Looking for a macro hopefully. Found many to delete the whole row but just the specific range based upon the duplicate criteria..As there is data surronding that area do not want to delete whole row just clear that specifc area.

H32:O32 clear contents if same as H31:O31 if any valuse are different then stays the same
H33:O33 clear contents if same as H32:O32 if any valuse are different then stays the same
H34:O34 clear contents if same as H33:O33 if any valuse are different then stays the same
H35:O35 clear contents if same as H34:O34 if any valuse are different then stays the same
H36:O36 clear contents if same as H35:O35 if any valuse are different then stays the same
H37:O37 clear contents if same as H36:O36 if any valuse are different then stays the same

View 9 Replies View Related

Go To Range Based On Cells Contents/Text

Sep 5, 2006

I am just learning VBA. I need to move to a cell location that is named in a range. As follows:

The cell "Sheet2!A1" has a formula that results in "Sheet1!B3". I would like my VBA code to read that cell and select Sheet1!B3. When using something like:

Application.GoTo Range("Sheet2!A1")

I end up of course at Sheet!2A1. I want to end up at Sheet1!B3 or wherever the cell reads at the time the code is read and operated on.

View 9 Replies View Related

Display Contents Of Named Range On Userform

Oct 18, 2007

i have a userform with a text box in it a i would like to display all the values in a named range called "emp1"

View 4 Replies View Related

Select Range Of Contents From Column Which Lies In Between Other Columns

Mar 24, 2013

I have a worksheet in which column A:C contains slno,name etc. Col D contains numerical data.D4:D5 is col heading. D6:D41 contains numerical data. I want to copy the data from D6:D37 only. for this i tried the following but with negative result.

1.select cell D5.
2.press F5 and enter -to goto cell D37.
3. press control and shift and up arrow to select the upper cells. Excel selects from D37 to D4 whereas i want it to be from D37:D6.selecting D6 and then press control shift and enter keys takes me to the last cell with the data in the column, ie,D41.

How can I select only the required cells so that i can copy the content.selecting the first cell and then dragging the cross is not an expected answer to solve this.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved