whether I can handle errors in a way that tells me which object caused the error?
For example if a userform has two combobox's and one causes an error, can I return to a message box containing the name of the object (combobox1 or combobox2)?
I have tried returning err.source but I am either not using it correctly or it isn't intended to be used this way.
I am receiving the following error:
-2147417848 automation error the object invoked has disconnected from its clients
Unfortunately, I can't tell where the error is occurring because everytime it happens excel crashes or at least stops responding. I tried waiting it out (about 20 minutes) but no luck. the only thing I can do is force the program to shut down through the task manager.
The program is designed to pull information from finviz.com (a financial site), filter the data. pull the next round of data and run the filters again. there are a total of 8 queries and i think it gets hung up during the 6th or 7th run through.
Stepping through the code does not seem practical since each query might pull as many as 300 rows of data that is evaluated in a for/next loop (thats a lot of F8s).
I have just signed up to the forums as I am having a very specific problem. I have looked on google and used the search feature (on several forums!) and found very limited information that is useful to me. I am having trouble with a very simple few lines of code in a macro. The code looks like this:
Function startmarketIDs()
Dim targeturl, writerow, readrow, textmass, xmlHTTP
targeturl = "http://lite.betfair.com/ Events.do?s=00010913z"
Set xmlHTTP = CreateObject("Microsoft.xmlHTTP")
xmlHTTP.Open "GET", targeturl, False
xmlHTTP.send
MsgBox xmlHTTP.StatusText
textmass = xmlHTTP.responsetext
MsgBox textmass
End Function
My problem occurs at the line "textmass = xmlHTTP.responsetext". The responsetext command is obviously causing problems because if I remove it, the code executes without error and the "xmlHTTP.statustext" says "OK". With the responsetext command left in, the code generates the following error: Run-time error '-1072896658 (c00ce56e)': System Error: -1072896658. If I change the targeturl to www.betfair.com, the code executes fine and I get a message box (as desired) with the source code of the website displayed. Without meaning to sound like Im answering my own question (!!), perhaps there is something about the url or the way in which I am using the xmlHTTP object that is causing the issue, I wondered if someone would mind inspecting my code and perhaps pointing me in the right direction?
My formula to add a row to a worksheet worked fine, except for the fact that it was including items with 0%. I need items with >0% but <=50%.
Here's the code that sorta works...
why the following code generates an error if I use the backspace key to clear the textbox?
Code:
Dim t As Date
If Len(Controls.Item("txtstart").Value) = 4 Then
On Error Resume Next
t = TimeSerial(Left(Controls.Item("txtstart").Value, 2), Right(Controls.Item("txtstart").Value, 2), 0)
On Error GoTo 0
ElseIf Len(Controls.Item("txtstart").Value) = 5 Then
On Error Resume Next
[code]....
How can I edit the following code. If the "Dload" tab is not there the code errors out. How can I make it so that if the "Dload" is not there the macro says "Dload tab missing. Do you want to check file and try again" If the user says yes. then the macro lets the user pick another file. If the user chooses No then does similar quesiton like I have here starting with
OpenA.Activate.
ChDrive "E:"
ChDir "E:2007 WorkAnalytical ReviewBalance Sheet"
The IF formula works if placed in a cell, but Vba doesn't seem to like the Quotation Marks in Rc11="".
View 2 Replies View RelatedI have searched the Forum for help on this error 91 but still cannot figure this out.
Below is a format macro I created. I have several ' Find' routines in here and at the beginning of each one I give it an 'On Error GoTo' type statement. This seems to work fine until it gets to a second error. I have moved various 'Find' routines around and it doesn't matter which order they are in, if there are two things it can't find, it gives the error 91 on the second.
Sub Format_SFDC_Detail_Reports()
'
' Macro to format salesforce.com reports with details. rguest
'
On Error Goto errorhandler
Msg = "Do you want to format this report for Landscape (Yes) or Portrait (No)?"
Style = vbYesNoCancel + vbQuestion + vbDefaultButton1 + vbSystemModal
Title = "Format Report as Landscape?"
response = MsgBox(Msg, Style, Title)
If response = vbCancel Then
'Exit the routine
Goto last_line:
End If
If response = vbYes Then
format_style = "Landscape"
End If
If response = vbNo Then
format_style = "Portrait"
End If
I have error trapping in place so if a find in a column returns no data the procedure continues, but the code breaks there anyway.
In Tools/Options/General/Error Trapping I have Break on Unhandled Errors checked.
I have changed my error trapping lables.
I have copied the procedure and renamed it.
A large Excel file that I have been working with for months is now giving me trouble.
When I tried to delete 2 rows, it displayed a message: "Excel cannot complete this task with avail resources. Choose less data or close other applications."
I opened a previously saved version of the file and tried deleting rows, and the same message came up.
I shut down the computer, rebooted, same problem.
Any way to determine if a file has been corrupted .... or even worse ... is there a possibility that my Excel program itself is corrupted?
why my code would hit a run time error on a shared file? It works fine unshared. This is on a ActivateSheet Worksheet Event, Code is housed in a Module and called when activated.
[Code]......
why this is causing an error upon opening the file. This workbook has a userform with a listbox (single list, single selection), and when I have the ControlSource property set it causes an error upon opening the userform (which opens when the file is opened), whereas if I do not have the ControlSource property set to anything, it seems to work fine.
Interestingly, if I set the file up to not open the userform with the file, and instead have the userform open when a worksheet control such as a command button is clicked, it doesn't seem to matter if the ControlSource property is set or not. The workbook in question is attached.
I am pulling external data from an Access 2007 database query that uses the nz function. While linking to the query, I get an "Undefined Function nz" error. The query works perfect when run in Access.
View 1 Replies View RelatedI have the following macro which I've pieced together which works great at clearing the cell as long as the text entered by the user is found in the specified column.
Unfortunately I'm a big rookie with this stuff and I can't figure out how to handle the process/error when an entered value is not found. When ChosenRow returns with a 0 I get a Run time error '91', Object Variable or With Block variable not set.
The code...
Private Sub CommandButton1_Click()
oldSheet$ = ActiveSheet.Name
Dim ChosenRow As Long
Dim loc As Variant
Application. ScreenUpdating = False
With UserForm4
loc = .TextBox1.Text
End With
With ActiveWorkbook
Sheets("Reference").Select
End With
this line
Cells. Find(What:=searchterm, After:=Cells(1, 1), MatchCase:=False).Activate 'find pn that is stored in searchterm
causes a runtime error 91 when there are no results. "Object variable or with block variable not set"
Ideally, when there are no results, I would like to enter a loop, where I could provide a drop down list of fuzzy matches, but I am not sure excel can do fuzzy matches. I'd settle for just highlighting the row and moving on... any help?
Option Explicit
Sub Macro1()
ActiveSheet.Cells.Find(What:="AES", After:=Cells(1, 1), MatchCase:=False).Activate 'find the aes part number column
Dim aescolumn 'create variable for index value of aes column
aescolumn = ActiveCell.Column 'set variable to index number
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB:
Sub GetRangeName()
Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
Run-time error '1004' Application-defined or object-defined error. I am trying to use this
View 2 Replies View RelatedI was trying to use the below code
View 4 Replies View RelatedFor some reason my form won't open when the workbook is opened. I get an error message "run time error '424' object required" (which happens when I have Form1.show in the BOTH workbook_open event and the userform_initialize event (oops)). When I removed form1.show from the userform_initialize I don't get an error but I also get no form. I recall having this issue before but I can't recall how to fix it.
Can I call the userform_initialize event from the workbook open event to get around this successfully and properly?
I keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:
ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"
In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.
If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click()
Dim filepath As String
filepath = Range("A100")
MsgBox ("File Appended")
Workbooks.Open (filepath)
Windows("CorrespondenceMaster.xls").Activate
Sheets("Sheet2").Select
Range("DesNo", "LocationPath").Select
Selection.Copy
Windows(filepath).Activate
Range("A2").Select
ActiveSheet.Paste
End Sub
I am having difficulty getting a form to work the way that I would like it to work. I have a form that is used to display questions that my students will be answering. The form also is used to put the answers into a worksheet. I have 2 sheets. Sheet2 has the questions, student answers, and correct answers. Sheet1 is used to indicate correct answers and to keep track of percentage correct. I am fairly new to VB. I have 2 pieces of code that I am going to post. The first one works and the second one doesn't.
This is in the "This Workbook" section and it works.
Option Explicit
Public intNoQ As Integer
Public strNoQ As String
Public NumberofQuestions As Integer
Dim StudentName As String
Dim InputBoxAnswer As String
Public Sub Workbook_Open()
Application.Visible = False 'Hide Excel
Load Questions
Load NumberCorrect
NumberofQuestions = Worksheets("Sheet1").Range("K3").Value
For intNoQ = 1 To NumberofQuestions
strNoQ = VBA.CStr(intNoQ)
If intNoQ = 1 Then
Questions.Controls("QuestionNumberBox").Value = "Question#" & strNoQ
Questions.Controls("QuestionBox").Value = Worksheets("Sheet2").Range("B1").Value
End If
Questions.Controls("CorrectBox" & strNoQ).Visible = True
Questions.Controls("CorrectLabel" & strNoQ).Visible = True
Next intNoQ...............
I have a spreadsheet which has 3 separate external queries running from worksheet 'A'. My user enters a couple of dates in another worksheet 'B' to supply the date parameters for the query and a macro runs to refresh all of the queries and performs a few calculations.This works fine. The trouble is I don't want the user to be able to view all the data on sheet 'A' only the summary on B. My macro ends up on sheet B but whilst the query is refreshing the raw data is displayed to the user on sheet 'A'. When I hide the sheet 'A' i get a run time error '1004' Select method of worksheet class failed.
View 4 Replies View RelatedI haven't figured out who hates who more, me hating VBA or VBA hating me.. we just do not get along very well.
Anyways, I am having difficult understanding why I am getting the following error:
Error 1004: application defined or object-defined error.
I am using code that I just copied over from a worksheet where it was working fine. This is part of it.
I have a userform setup to enter data into a worksheet
Whee the user hits the button to add the data, I get the error 1004
Application defined or Object defined error
It is on the line Set LastRow
Private Sub CommandButton1_Click()
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(x1Up)
....end sub
Now I am sure this has always worked in the past, so Is it me or am I really missing a plank or two?
when I run the macro, I receive an error: "Run-Time Error '1004': Application-Defined or Object-Defined Error" See attached macro. If I click "Debug", the line "With r.Resize(,1)....... becomes highlighted in yellow.
View 9 Replies View RelatedIn one worksheet i have created the following code, which adds date to
specific column when data is entered in colum A.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 1 Then
Target.Offset(0, 10).Value = Now()
End If
End Sub
The problem is that when trying to delete a whole row, error message pops-up.
Run-time error '1004' Application-defined or object -defined error. When click "End" actually everthing is ok, the row has been deleted, but was just wondering what is causing that error.
This error is telling me "application defined or object defined error" and i am unsure how to fix it. Basically i have a ton of files within a folder that i am trying to do some reformatting to. I would like to save the new files to a new folder and keep the originals where they are.
View 5 Replies View RelatedAm getting Object variable not set error in the selection.find code. I dont see anything wrong with the code..
VB:
rivate Sub Btn_Edit_Click() ' code for Edit Function
Dim findvalue As String
Dim FileName As String
[Code].....
I can see the value of "findvalue" do exist in the column "A:A".