Im getting an "Invalid or unqualified reference" error from this sub.
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
If ("C5") > ("b5") Then .Select ("C5")
Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End If
End Sub
I want to superscript the values from row 8. There is a column title in row 7 which I don't want to superscript. So I added the line.
[Code] ....
Which is giving error .
superscript.xlsm
Code:
Sub ProtectAll()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
.Protect Password:="Password", AllowFiltering:=True
.EnableSelection = xlUnlockedCells
End With
End Sub
I am trying to get autofilter to be active when i run my protect macro.
I'm getting the compile error: Invalid or Unqualified reference and it's highlighting the .autofiltermode= part of the code. Now, keeping in mind that I had a LOT of help with this and I'm a complete newbie, is there anything obvious that I may be missing? I have to admit that I really don't know much about the autofilter stuff. That was taken from in here somewhere and I tweaked it and got help with it so once I moved things around it broke!
Private Sub CommandButton1_Click()
Dim strPick As String
Dim LastRow As Long
Dim FstRow As Variant
Dim ws As Worksheet
Dim allshts As Worksheets
On Error Goto ErrorTrap:
Worksheets("General").Range("A2:I65536").ClearContents
For Each ws In allshts
strPick = "Started"
.AutoFilterMode = False
ws.Range("A1:I1").AutoFilter
ws.Range("A1:I1").AutoFilter Field:=5, Criteria1:=strPick
.UsedRange.Offset(1, 0).SpecialCells(xlCellTypeVisible).Copy _
Destination:=Sheets("General").Range("D65536").End(xlUp).Offset(1, -3)
Next
ErrorTrap:
MsgBox ("Error: " & Err.Source)
Resume Next
End Sub
I have written the following VBA Script but am getting an error message saying -> "Compile Error. Invalid Next control variable reference".
Code:
Sub Form1() 'Change Yes/No
Dim bottomT1 As Integer
bottomT1 = Sheets("Data Sheet").Range("T" & Rows.Count).End(xlUp).Row
Dim bottomP2 As Integer
bottomP2 = Sheets("Follow-Up").Range("P" & Rows.Count).End(xlUp).Row
Dim bottomO2 As Integer
bottomO2 = Sheets("Follow-Up").Range("O" & Rows.Count).End(xlUp).Row
[code].....
I have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.
The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.
The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."
One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!
I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!
When I insert a row into a worksheet (by selecting the row and then hitting ctrl+plus, or by going through the menu insert, row), a message pops up, as follows:
I created this worksheet from scratch and am not aware of any invalid reference.
Why this doesn't work?
I get the error message: Invalid Next control variable reference
And it highlights the i in 'Next i'
[Code] .....
Never got this message before with the old excel so i dont know how to resolve. I get this. "Invalid Reference. File conversion can not contain formulas that reference cells beyond a worksheet size of 256 columns(columns IW or higher) or 65536 rows." Im doing a VLookup and when i input the table array it is always invalid when i know it is valid. The spreadsheet im referencing does not have any formulas beyond that range either. Another guy i work with is now getting the same error with the new excel.
View 9 Replies View RelatedI'm creating a chart that will show a running average of a set of values. First column has the values and the second is a running average. Here's my sample data:
55.0
65.5
8732.7
425.5
521.4
8832.5
528.6
826.0
423.6
My formula for the second column is as follows, =AVERAGE($G$1:G1), =AVERAGE($G$1:G2)... and so on.'
My problem is when I try to run the same formula on a different worksheet to put on the current worksheet, I get an error from Excel that the formula is invalid. Here's the formula I use, =AVERAGE('Team Stats'!$A$I1:AI1), =AVERAGE('Team Stats'!$A$I1:AI2), ...
Is this a bug with Excel? Is the format wrong? I've tried just using the function wizard and it tells me that the absolute reference is invalid.
I am currently using cell references to create a depedendent list with data validation. How to make cell references show up with some invalid characters?
For example, one of my cell references is Youngs_Market_Company. However, when pulling up the cell, I want it to be displayed as Young's Market Company.
I have a very strange problem with a pivot table in Excel 2007. The source data is in a table in another workbook, stored on a shared network drive. We have 7 PCs in our office, and on 6 of them the pivot table refreshes fine. On the other, it always comes up with an error message that the reference is not valid, even if the source workbook is open. This particular PC is connected by a cable, so it can't be a wireless network problem.
All the PCs have got all updates installed, and as far as I can see the Trust Centre settings are the same (the problem PC can run macros from the same folder without problems). The really annoying thing is that the user of the problem PC is the only person who actually needs to refresh the data as part of her job.
I'd prefer to edit links with the source workbook open, however I receive this error when I do "A formula in this worksheet contains one or more invalid references." I am able to edit links with the source workbook closed but this takes far too much time to be satisfied with that as the solution. I have used vlookup formulas and the index-match method and they both take about the same amount of time to update. I've separated each worksheet and used the "name manager" add-in and have searched all links for any type of error. I feel like I'm missing something. Is there a way to fix this "invalid reference" error so that I can edit my links with the source workbook open?
View 1 Replies View Relatedi keep getting errors when im trying to run this bit of code
View 4 Replies View RelatedI am trying to get a combo box to work, but keep encountering the error "Invalid Property Value."
When the combobox entry is deleted and the user moves to the next text box in the userform, this error pops up which is very annoying. It also pops up when the word entered doesn't match, like it is supposed to.
I have MatchRequired set to True, because I want an error message to come up, but with my own error message like " That name doesn't exist, please try again ".
I can't figure out a way to ignore the "Invalid Property Value." error message, and show my own customized message.
I am receiving the error message Run Time Error '94' Invalid use of null when running my program.
here is the code where the error is being caused:
Compile Error: Invalid Outsid Procedure
I have Compile error coming up when I try to run Sub DeleteRecord on Sheet 2. It brings me to the VBE with sheet 1 code brought up and the Compile Error showing, with the xlup portion of the code highlighted. I okay the error and it highlights the Sub DeleteRecord on Sheet 2 with a yellow arrow.
Sheet 1 code as follows:
Dim y As Long
y = Range("A65536").End(xlUp).Row
Range("A1").AutoFill Destination:=Range("A1:A" & y), Type:=xlFillDefault
Range("J1").AutoFill Destination:=Range("J1:J" & y), Type:=xlFillDefault
Range("K1").AutoFill Destination:=Range("K1:K" & y), Type:=xlFillDefault
Range("L1").AutoFill Destination:=Range("L1:L" & y), Type:=xlFillDefault
Range("M1").AutoFill Destination:=Range("M1:M" & y), Type:=xlFillDefault
Range("N1").AutoFill Destination:=Range("N1:N" & y), Type:=xlFillDefault
Range("O1").AutoFill Destination:=Range("O1:O" & y), Type:=xlFillDefault
Range("P1").AutoFill Destination:=Range("P1:P" & y), Type:=xlFillDefault
Sheet 2 code at follows:
Sub DeleteRecord()
'
' DeleteRecord Macro
'
'
Application.ScreenUpdating = False
ActiveSheet.Unprotect
ActiveCell.Offset(4, 3).Range("A1:H2").Select
[code]....
I am using some code I found on the internet, but I have made some samll changes to it and I am getting a Run-time error 481 - Invalid picture Some of the Pitures do load but some of them dont load.
Here is the code I am using
Code:
Public Declare Function URLDownloadToFile Lib "urlmon" Alias "URLDownloadToFileA" (ByVal pCaller As Long, _
ByVal szURL As String, _
ByVal szFileName As String, _
[Code].....
I'm adding a new macro and getting the error message Compile Error:Invalid outside procedure. I'm using the following code
Dim wSheet As Worksheet
Dim vFound
On Error Resume Next
For Each wSheet In ActiveWorkbook.Worksheets
With wSheet
Set Tble_Array = .Range(Tble_Array.Address)
vFound = WorksheetFunction.VLookup _
(Look_Value, Tble_Array, _
Col_num, Range_look)
End With
If Not IsEmpty(vFound) Then Exit For
Next wSheet
Set Tble_Array = Nothing
VLOOKAllSheets = vFound
End Function
I am trying to find out why this array would net me an invalid qualifier error
Dim YearComboBox(1 To 6) As ComboBox
Dim i as Integer
For i = 1 to 6
YearComboBox(i).List = Array("2006", "2007", "2008", "2009", "2010")
Next i
I have a code for userform login. The users will enter their user name, password, and role and then click on submit. The user names, password and roles are given in the sheet "user access".
Now the problem is if a user enters a wrong user name which is not on the sheet "user access", it gives a msg stating invalid username. And if I click ok it is showing a run time error. Is there a way to stop showing this run time error and just show the invalid username msg box alone.
I have got a UserForm which pulls data from Excel sheet and show it on UserForm.
UserForm1 has One ListBox name "ListBox1" and Thirteen TextBox's.
TextBoxBatch...... Showing Batch number
TextBox1 ........... Showing Year 1 data
TextBox2.............Showing Year 2 data
TextBox3...............Showing Year 3 data
.
.
.
.
TextBox12...........Showing Year 12 data
It shows data correctly in UserForm1 for TextBoxBatch and TextBox1 to TextBox9 but when it reaches TextBox10 it give error "Could not get Column property, Invalid argument"
And it does not show data in TextBox10 (Year 10), TextBox11 (Year 11), and TextBox12 (Year 12).
I have attached workbook and userform.
Book1.xlsm
I'm trying to create a userform with a combobox wherein items that will be provided in it will be based on the worksheet named NA. When i try to change the Rowsource on the properties of the combobox i'm getting an error "could not set the rowsource property. Invalid property value". Do I need to declare the name of the worksheet before changing the rowsource?
View 6 Replies View RelatedI'm making changes to row A, but am getting an invalid outside procedure, not sure why. Don't even know what it means. It's not even in the same worksheet....
View 9 Replies View RelatedI created a form that my employees could use to log their work. When I toggle between the combobox and the qtytextbox I get an "invalid property value" error that debugs to the line of code that opens the userform. I have no idea how to fix this. The spreadsheet has a button that shows the userform. This code is:
Private Sub rectangle1_click()
If frmLCWork.Visible = False Then frmLCWork.Show
Exit Sub
End Sub
The userform has a combobox for employees to select the completed "task", a quantity textbox and then an "add to log" button. The form code is:
Option Explicit
Private Sub cmdAdd_Click()
Dim sStep As String
Dim Row As Long
'check for a task
If Trim(Me.cbxTask.Value) = "" Then
Me.cbxTask.SetFocus
MsgBox "Please specify which task you completed."
Exit Sub
End If....................
I've written an Excel (using 2007, compatibility mode to 2003) app for our stock control. Basically it's a protected stock sheet which the user adds/removes stock via a form.
When the user runs the form the following code loops through the stock list header adding item names to a combo box. Problem is I get a run-time error if there's more than 60+ items but while the error always occurs, it happens at different places in additems.
Run-time error '-2147024809 (80070057)
Invalid argument.
In the code I've allowed a loop to 1000 items but in reality they'll be no more than 150.
I create and load a commandbar, prior to loading it I attempt to check if it exists, then delete it, and recreate.
I dont understand why this seemed to work for months and now creates an error.
It appears that every now and then the created commandbar is not created when I open a file. Thats when the error pops up. I can manually run the Create_Bar sub and it will be fine, for a while.
Run-time error '5':
Invalid procedure call or argument
This section is in my personal.xls file in "ThisWorkBook" of personal.xls.
When I try to populate a worksheet with the data from a multicolumn listbox on a userform.
I have references which list index is to go to which cell on the worksheet, however if there is no entry in this list index it is giving me this error.
As the listbox could have 1 line or up to 10 lines populated, I think I need to put an error handling on so that if the entry in listbox index is "" then resume next, or something like that. However everything I have tried doesn't work and I keep getting this error.
Here is the code I have to populate the worksheet from the listbox. There are 7 columns and 10 rows.
How to handle this error?
[CODE]
Private Sub cbPrint_click()
Call Error_Handling_VBA_On_Error_Resume_Next
Dim ws As Worksheet
Set ws = Worksheets("Invoice Copy")
With ws
.Range("B11") = CusName.Value
[Code] ......
Code:
Dim LR As Long Dim Dash As Long, _
Whole As Double
Dim pi ', WorkSheets, Range
WorkSheets("Sheet3").Select
LR = Sheets("Sheet3").Cells(Rows.Count, "A").End(xlUp).Row
[Code] .........
We have a very long macro that at the end sends an email to each training coordinator. Within the body of the email, we want to autopopulate the completion status from a pivot table using getpivotdata.
We first try to set the variable but get an error: [compile error:invalid qualifier].
Sheets(Summary).Select
Dim BDCompletion As String
BDCompletion = Application.PivotTableSelection.GetPivotData(A3, "Business Dev Plan Found")
And this is how we plan to incorporate the variable into the body of the email:
With OutMail
.To = "name@company.com"
.CC = ""
.BCC = ""
.Subject = CurrentSheet.Name & " Training Plan Status as of " & Format(Now, "dd-mmm-yy")
.Body = "BD is " & BDCompletion & " complete for 2007 Training Plans as of the date of this email."
.Attachments.Add Destwb.FullName
'You can add other files also like this
'.Attachments.Add ("C: est.txt")
.Send 'or use .Display
End With
