Code:
Sub ProtectAll()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
.Protect Password:="Password", AllowFiltering:=True
.EnableSelection = xlUnlockedCells
End With
End Sub
I am trying to get autofilter to be active when i run my protect macro.
I want to superscript the values from row 8. There is a column title in row 7 which I don't want to superscript. So I added the line.
[Code] ....
Which is giving error .
superscript.xlsm
Im getting an "Invalid or unqualified reference" error from this sub.
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
If ("C5") > ("b5") Then .Select ("C5")
Selection.Interior
.ColorIndex = 6
.Pattern = xlSolid
End If
End Sub
I'm getting the compile error: Invalid or Unqualified reference and it's highlighting the .autofiltermode= part of the code. Now, keeping in mind that I had a LOT of help with this and I'm a complete newbie, is there anything obvious that I may be missing? I have to admit that I really don't know much about the autofilter stuff. That was taken from in here somewhere and I tweaked it and got help with it so once I moved things around it broke!
Private Sub CommandButton1_Click()
Dim strPick As String
Dim LastRow As Long
Dim FstRow As Variant
Dim ws As Worksheet
Dim allshts As Worksheets
On Error Goto ErrorTrap:
Worksheets("General").Range("A2:I65536").ClearContents
For Each ws In allshts
strPick = "Started"
.AutoFilterMode = False
ws.Range("A1:I1").AutoFilter
ws.Range("A1:I1").AutoFilter Field:=5, Criteria1:=strPick
.UsedRange.Offset(1, 0).SpecialCells(xlCellTypeVisible).Copy _
Destination:=Sheets("General").Range("D65536").End(xlUp).Offset(1, -3)
Next
ErrorTrap:
MsgBox ("Error: " & Err.Source)
Resume Next
End Sub
When I insert a row into a worksheet (by selecting the row and then hitting ctrl+plus, or by going through the menu insert, row), a message pops up, as follows:
I created this worksheet from scratch and am not aware of any invalid reference.
Why this doesn't work?
I get the error message: Invalid Next control variable reference
And it highlights the i in 'Next i'
[Code] .....
Never got this message before with the old excel so i dont know how to resolve. I get this. "Invalid Reference. File conversion can not contain formulas that reference cells beyond a worksheet size of 256 columns(columns IW or higher) or 65536 rows." Im doing a VLookup and when i input the table array it is always invalid when i know it is valid. The spreadsheet im referencing does not have any formulas beyond that range either. Another guy i work with is now getting the same error with the new excel.
View 9 Replies View RelatedI'm creating a chart that will show a running average of a set of values. First column has the values and the second is a running average. Here's my sample data:
55.0
65.5
8732.7
425.5
521.4
8832.5
528.6
826.0
423.6
My formula for the second column is as follows, =AVERAGE($G$1:G1), =AVERAGE($G$1:G2)... and so on.'
My problem is when I try to run the same formula on a different worksheet to put on the current worksheet, I get an error from Excel that the formula is invalid. Here's the formula I use, =AVERAGE('Team Stats'!$A$I1:AI1), =AVERAGE('Team Stats'!$A$I1:AI2), ...
Is this a bug with Excel? Is the format wrong? I've tried just using the function wizard and it tells me that the absolute reference is invalid.
I am currently using cell references to create a depedendent list with data validation. How to make cell references show up with some invalid characters?
For example, one of my cell references is Youngs_Market_Company. However, when pulling up the cell, I want it to be displayed as Young's Market Company.
I have written the following VBA Script but am getting an error message saying -> "Compile Error. Invalid Next control variable reference".
Code:
Sub Form1() 'Change Yes/No
Dim bottomT1 As Integer
bottomT1 = Sheets("Data Sheet").Range("T" & Rows.Count).End(xlUp).Row
Dim bottomP2 As Integer
bottomP2 = Sheets("Follow-Up").Range("P" & Rows.Count).End(xlUp).Row
Dim bottomO2 As Integer
bottomO2 = Sheets("Follow-Up").Range("O" & Rows.Count).End(xlUp).Row
[code].....
I have a very strange problem with a pivot table in Excel 2007. The source data is in a table in another workbook, stored on a shared network drive. We have 7 PCs in our office, and on 6 of them the pivot table refreshes fine. On the other, it always comes up with an error message that the reference is not valid, even if the source workbook is open. This particular PC is connected by a cable, so it can't be a wireless network problem.
All the PCs have got all updates installed, and as far as I can see the Trust Centre settings are the same (the problem PC can run macros from the same folder without problems). The really annoying thing is that the user of the problem PC is the only person who actually needs to refresh the data as part of her job.
I have a file with data in one sheet (unfortunately I cannot share the file because of confidential data..), and two sheets with both 9-11 charts in them.
The charts are all filled simply with a dynamic range from the datasheet, so that Last Year and all months from this year with data in them are always in there.
The problem: When opening either of the graph sheets, the (familiar?) error pops up: "A formula in this worksheet contains one or more invalid references. Verify that your formulas contain a valid path, workbook, range name and cell reference."
One of the graphs has an error and only shows one point of data in it. But only until I press F9, and then the chart is repaired and functions perfectly like all the others!
I have tried lots of things, including checking all source ranges, deleting all graph names etc. and then repaired it so it would work again. The only thing that happened, is that the same error now pops up for another graph in the sheet. Still, when you press F9, the graph functions again!
I'd prefer to edit links with the source workbook open, however I receive this error when I do "A formula in this worksheet contains one or more invalid references." I am able to edit links with the source workbook closed but this takes far too much time to be satisfied with that as the solution. I have used vlookup formulas and the index-match method and they both take about the same amount of time to update. I've separated each worksheet and used the "name manager" add-in and have searched all links for any type of error. I feel like I'm missing something. Is there a way to fix this "invalid reference" error so that I can edit my links with the source workbook open?
View 1 Replies View RelatedI need to add a Reference to the "The Microsoft Visual Basic Extensibility Library 5.3" using VBA code in an Excel spreadsheet. I know how to do it going to Tools...References select the library etc, but I'd rather do it using VBA code so I don't have to do this extra step.
View 3 Replies View RelatedHow can I change the following line of code to reference Cell "D1" on the "Publish Details" sheet to replace the "D2:D"? ..
View 9 Replies View Relatedmy excel sheet runs through different cases (i=1 till i=20). For each case I need to use the solver. Since the whole programm works with references like this cells(10 + i, columnindex).value I tried this with the solver, too. e.g.: SolverOk SetCell:=Cells(20 + i, 46), ValueOf:="0.000001", ByChange:=Cells(20 + i, 47)
But it gives me not a right result as it would give me with a reference like
SolverOk SetCell:="$AT$21", ValueOf:="0.000001", ByChange:="$AU$21"
I tried difference referencing things with different types of brackets, wih range, etc. but I could not figure it out hwo it might works.
I am building a spreadsheet that references 'LHA rent rates' listed in other cells.
Example table
Bed rate Code: LHA per week:
0 - £55.00
1 - £91.85
2 - £109.61
(Ie two columns with six cells. The first number before the dash are in a separate column. Each of these £ amounts will be in a separate cell.)
In another part of the sheet, i want to be able to type '0' in Cell 1, and this will trigger a formula in Cell 2 to retrieve the correct £ amount i.e., £55.00 in the 'example table' above. Likewise if i change Cell 1 to '2', then Cell 2 automatically updates to £109.61.
I think this would be a long IF formula in Cell 2, but how to do it.
I need a VBA code to reference the cell value to activate a particular worksheet name. In the sheet "Ini", Range ("B4"), there is a text of "Rawdata" This text is used to reference to the specific Sheet name and activate it.
However, I am unable to get my code to work. Thus, I changed it with a ' with green highlights for the following lines:
'Worksheets.Open Filename:=DataRawSheet
'ActiveSheet.Range("A1").Select
Reference_Cell_to_Sheet.xlsm
I have a macro which (see below) which will autofilter a spreadsheet to only show cases which are older than a 200 days. I'd like to add the ability for the end user to change the filter criteria as required (say from 200 to 300).
Ideally this would be done by having the macro reference cell G22 which is where I would allow the end user to change the filter criteria.
I am looking to start writing a code that will a row # from a dynamic cell within the workbook and use that row # to select the row and delete it.
Example:
In Cell G5=8
I would like the VBA code to see 8 as row 8 and delete row 8.
Row 8 is determined by looking up a name and finding which row it is in and returning the row number.
I'm at my wits end trying to work out why I'm getting a circular reference when this code runs:
Private Sub TextBox1_Change()
Cells(Rows.Count, "K").End(xlUp).Offset(1).Value = Range(TextBox1.LinkedCell).Value
With Range("K5").Resize(40, 1)
.FormulaR1C1 = "=OFFSET(" & Cells(Rows.Count, "K").End(xlUp).Address(True, True, xlR1C1) & ",-(ROW(RC)-ROW(R5C)+1),0,1,1)"
.Value = .Value
End With
End Sub
The circular reference cell is K29. I have an "X" in K46 after which all the values in TextBox1 are copied.
Is it possible to make a textbox or combobox the reference of a formula in a cell?
I know that you can just do this on VBA, but if possible I don't want to do that in this particular case.
I'm looking for a macro that changes Iterations from 100 to 10. I have a circular reference that I can't seem to completely remove, so my endusers complain about the pop-up warning. I know I need to resolve the circular ref issue, but in the meantime I would like to create a button that makes it easy for an enduser to change the Iterations with one click. A secondary question is, "Am I sacrificing significant accuracy by limiting Iterations from 100 to 10? I'm dealing with $'s, so the nearest penny is good enough.
View 2 Replies View RelatedI am attempting to modify the code below to, not only reference the ".Item(rCell.Value)", but also include it's formatting. The format for that referenced cell will not necessarily be a "certain" format..so I don't want to have to write out what specific formatting needs to happen.
VB:
If (.exists(Trim(rCell.Value)) And rCell.Offset(, 1).Value = "") Then rCell.Offset(, 1) = .Item(rCell.Value)
The entire code is as follows:
VB:
Sub FillVariablesOnlyBlanks()
Application.ScreenUpdating = False
Dim a, i As Long, rCell As Range, ws As Worksheet[code]....
Where it is bolded I am trying to replace that with a cell reference such as A1 where I can input a website in that cell rather than edit the VBA code everytime
Here is the code:
Sub URL_Get_Query()
With ActiveSheet.QueryTables.Add(Connection:= _
"URL;http://quote.money.cnn.com/quote/quote?symbols=msft", _
[Code]....
I'm having trouble calling a subroutine from a command button. It's puzzling because I've set up buttons before and didn't have this trouble.
Here is my button
Private Sub EPConversionButton1_Click(ByVal target As Range)
Convert_Hrs_EP target
End Sub
And here is the subroutine.
Sub Convert_Hrs_EP(target As Range)
End Sub
There's nothing there yet, but I keep getting error messages regarding the transfer from the button code to the subroutine.
The message is: Procedure declaration does not match description of event or procedure having the same name. The Help file says this means that my procedure has the same name as an event, but does not have the same signature. But it's not so.
I need to copy a range of values from sheet 3 to sheet1. When I recorded macro, I got the below code. But, instead of RC in the 4th line <ActiveCell.FormulaR1C1 = "=Sheet2!RC"> I need to pass values like A1,A20 etc.
Since the values range & column to be copied would be varying dynamically, (say for first iteration it would be A1: A20 & for second iteration, I need to copy C1: C20.) how to pass these variables to the macro and use it instead of the static "RC". Whatever column I specify, it should copy from that <column>StartRow to that <column> EndRow.
Sub Updtval(StartRow As Integer, EndRow As Integer, f As Integer)
Sheets("Sheet1").Select
Range("A1").Select
ActiveCell.FormulaR1C1 = "=Sheet2!RC"
Range("A1").Select
Selection.AutoFill Destination:=Range("A1:A6"), Type:=xlFillDefault
End Sub
I've got 3 sheets, A, B, and C. In sheet C, I have a cell named "element". That cell can have either the letter A or the letter B in it. In my VB code, I want to reference the sheet which correlates with the "element" cell. So,
Worksheets("element").Select
when the user clicks my "go" button, it calls this logic, and I want the worksheet that correleates to the letter in the cell in worksheet C - to open.
The reason for my posting - this is not working, and may not even be possible. Perhaps someone has experience in this and knows how to do it - or knows a different way to do this.
how to use VBA to write a formula in one sheet that refers to a fixed cell on the sheet to the right. The referenced sheet may have different names and it may be in a different order (i.e. not Sheet(2)) but it will always be one sheet to the right. I just want to have cell A1=(cell B2 one sheet to the right).
View 7 Replies View RelatedHow do I change the code so that the macro looks up the next sheet (instead of by sheet number, which is how the code was recorded) and transfers data to the summary page until there are no more new sheets. See attached zip.
View 6 Replies View Related