Use VBA Code To Run A Report In Access And Then Save It As PDF?

Jan 13, 2012

Is it possible to use vba code to run a report in Access and then save it as a PDF?

I have a subroutine (well, a combination of subroutines) that copies some data from a spreadsheet into Access.

I then want to be able to run a report based on that data, save it as a PDF and email it out: all automatically.

I don't want the user to have to actually open Access and run the reports, because it's much slower! For some reason Excel can open access, write to tables and close it within a matter of seconds: opening the program manually, editing the table and closing it can take minutes.

View 9 Replies


ADVERTISEMENT

How To Save And Close An Excel Using Access VB Code

May 15, 2009

I have two procedures in two different access forms. First procedure executes fine. It ends up with creating a Table1 by importing the data successfully from the Excel file. But after that later when I call procedure 2, it throws the below error when it is trying to import the data in to Table2. I think the Excel "Test.xls" did not save properly and close in the Procedure 1. I could see some Excel thread running in the Task Manager. How can I handle this. Please advice. Your expertise help will be truly appreciated. I am absolutely new to this VB-Access code world.

Error: "'MySheet2$'is not a valid name. Make sure that it does not include invalid characters or punctuation and that it is not too long." ....

View 9 Replies View Related

Access-Like Report Without Utilizing Access

Sep 12, 2006

I have an Excel file ( named "Classes.xsl"), that has a worksheet (named "RawData") that is layed out something like:

Name Dept Class
John 0547 Class 1
Jane 0368 Class 1
Jim 0368 Class 2
Sue 1235 Class 2

I am trying to get an Access-Like report without utilizing Access. Is there a way to generate a report similar to below using Excel as the data source (could be mail merge, perhaps a macro with a printout) I am not sure which way to try and was hoping someone could point me in the right direction...and possibly provide an example.

Class EnrollmentClass 1John 0547
Jane 0368Class 2Jim 0368
Sue 1235

View 4 Replies View Related

Excel / Access Report Automation

Sep 10, 2013

I have an Excel report that I'm wanting to know if it can be automated. Basically it starts off in Access, I have a few queries that run via an Access Macro, once the queries are done there is one query via the macro that exports a file of data to excel. I then have a 2nd excel file that is a pivot table that I refresh from the exported Excel file of data from Access. Once refershed, save it, upload it to a Sharepoint Site and send out an email via Outlook. Basically I'm wanting to know if this can be automated to were it runs at like 6am or something before I even get on my computer. I'm not a vba expert, I can do some basic stuff but what takes most people an hour or so to do would take me a day or so. Also would this be easier to just have the pivot update directly to the Access DB?

View 1 Replies View Related

Save & Email A Report

May 7, 2007

I am using the below code to save & email a report that is needed for a variety of different locations. I would like to be able to automate sending to multiple branches a branch specific report with some sort of a loop but I am not sure how to do it. So far, I have the below code that works for saving & emailing to one branch, however I was wondering if someone has an idea on how to loop the procedure and send to multiple branches? For example, if I have 3 branches 3 different managers:

Here is the code so far:

Private Sub emailreport_Click()

Password = "nohs1"
ActiveSheet.unprotect Password

On Error Resume Next

Dim wb As Workbook
Application.ScreenUpdating = False
ActiveSheet.Copy

Set wb = ActiveWorkbook
With wb ....................

View 9 Replies View Related

Trusted Location - How To Save To And Access

Sep 29, 2008

managed to get a piece of code working to create unique sequential numbers for purchase orders, but only by "enabling all macros" which is apparently not recommended and could conceivably, as I understand it, leave a PC vunerable to viriuses contained in other imported files.

Please bear with me as I'm very new to anything other than basic Excel functions; macros were, until last week, something I didn't even know existed, let alone how to use them. Anyway, having got my macro working, I understand that the best thing to do is put it in a "trusted location" from where it will work automatically without requiring operator input (whilst still maintaining high overall security), rather than "enabling all macros", but I have a couple of issues with this.

Firstly, having created a folder in "my documents" as per the instructions, how do I save the macro there? What format should it be in? Surely not a word document? (as you can gather I am still really in the dark about all this). If not, what?

Secondly, how do I direct Excel to access and run the macro from this "trusted location" folder, rather than the already existing "module1"?

View 9 Replies View Related

Save A Report On After Entering The Values In Spefice Cells

Nov 19, 2007

the code of how do stop saving a report if the spefic cells are not filled.

For ex: In a excel sheet in we have A1,A2,A3 there should be some values else its should not save and should show an alert stating that this cell is empty....

View 9 Replies View Related

Macro To Access/edit/save A Text File

Apr 21, 2008

I have an xl doc in which one of the sheet's column A changes value every 1 hour...

What I would like to know is.. if there is a method in which i can copy these values from column A to a text file every hour...

The range of cells containing values in Column A also varies every hour.

Also, the old values in the text file needs to get deleted before the new values are updated every hour.

View 14 Replies View Related

Code, That Disables Save, Save As And Close Commands

Nov 2, 2009

Each of the worksheets in my model use A1 as a control cell for any errors and inconsistencies. My aim is to disable save and close commands in case A1 is not equal to 0 in any of the worksheets.

The code I currently use for that purpose is as follows.

View 2 Replies View Related

Summary Report Using VB Code

Dec 1, 2006

I have a report that I need to summarize, here is some sample data.

Dealer CodeParticipantModules
F23CH ROB MASSON10
F23CH ROB MASSON7W
F23CH ROB MASSON8
F23CH ROB MASSON9
F32C5 JOHN COUTTS16
F32C5 JOHN COUTTS17
F32C5 JOHN COUTTS21
F32C8 SCOTT PLAKHOLM7
F32C8 SCOTT PLAKHOLM7S
F32C8 SCOTT PLAKHOLM7W
F32C8 SCOTT PLAKHOLM8

Desired results would be column A Dealer Code, Column B Particpant, Column C a summary of Modules taken, Column D a count of Modules

Ex:
F23CH Rob Masson 10,7W,8,9 4
F32c5 John Coutts 16,17,21 3
F32C8 Scott Plakholm 7,7s,7w,8 4

Is there a easy fix using VB code? The report is usually between 1500 lines and 2000.

View 11 Replies View Related

VBA Code For Extract Report From Tools?

May 1, 2014

VBA code to extract excel report from tools e.g. SAP or other tools.

View 3 Replies View Related

Prevent Access To The Code Of A Macro

Feb 9, 2009

Is there a way to prevent access to the code of a macro? I am interested in sending out some macro's, but would prefer that the user only be able to run them, and not be able to access the code via the edit button. Curiously, there have been occasion's where I wanted to edit my own work, but the edit button did not function, so I had to exit and start over to proceed. From this I'm guessing there must be a way.

View 2 Replies View Related

Error In Loading DLL On Access Of VBA Code

Apr 27, 2009

Over the weekend I did some edits to an Excel file on my home computer. This morning I did some edits to the file on my work computer. When I try to access the VBA code, I get the message "Error in loading DLL", which is error 48.

View 10 Replies View Related

VBA Code To Run Access Macro In Excel?

Oct 24, 2013

The current code is not working.

View 1 Replies View Related

VBA Code To Access Active Cell ONLY

Nov 10, 2008

I am trying to add a button on my spreadsheet that will give the person Access to one cell only. The cell in its normal state is Locked. The cell is ALWAYS in Column F of a sheet titled Master. The button is located on the sheet titled Master.

The real problem may arise in that once the person has access to the cell and they make their changes I need that cell to return to being Locked and the sheet once again Protected with Filtering.

Does this make sense to anyone? Can it be done and if so any suggestions?

View 9 Replies View Related

Access Lookup Table From Vba Code

Feb 6, 2008

I've trailed through the search engine on here and I can't find an answer to this:
Can you access lookup tables in Excel from VBA code? I assume you can, but can't seem to find anything on this

View 6 Replies View Related

Have Code To Block Save But How To Keep Code In Workbook Without Saving The File

Aug 1, 2013

My company has files that are already in use. I don't know too many details about how they work, but somehow saving the file will screw it up and my boss has to go back and reset something or other to correct it. Obviously it's connected to some other software somewhere. The code below will block Save and Save-As. BUT how do I get the file to hold onto the code without actually saving the file after the code is added (since the file shouldn't be saved)?

VB:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If SaveAsUI = False Then
Cancel = True

[Code].....

View 1 Replies View Related

VBA Code To Connect To BMC Remedy And Fetch Report?

May 9, 2013

I have a requirement to pull report from BMC remedy using VBA. I am sure that many people would have achieved this. .

View 1 Replies View Related

Having Trouble Opening An Access File Using This Code.

Feb 9, 2009

Having trouble opening an access file using this code. Using the following code

View 3 Replies View Related

Running An Excel Macro Using VBA Code In Ms Access

Nov 13, 2006

I am attempting to run a MS Ecel macro that is stored on a MS Excel shared file in a MS Ecel target file (locally stored on my C drive) from a VBA module in Ms Access. That is, from a code i want to open the .xls file that houses the macro, and then open the .xls file that i want to run the file in, and then run the macro.

Here is my situation: the file that houses the macro has the workbook hidden and causes in error.

if i unhide the workbook i get a Run-Time Error 91...object variable or With block variable not set.

if i hide the workbook the vba coding can't find the macro...run time error 1004

once again, i currently have an excel file that houses macro whose workbook is hidden.

does anyone know how this can be accomplished?

here is the ....

View 9 Replies View Related

Change A Access Query Criteria Using A VB Code

Oct 14, 2008

I looking for a solution to change a Access Query Criteria using a VB code in Excel, without opening the Access DB and changing the criteria manualy?

My normal Job is it:
1) I Work all the time in Excel
2) At the end of the work in Excel, I need to open Access
3) Open a query (Called "MyQuery")
4) Change one parameter the Date: Between 01/10/2008 and 30/10/2008 (This for each month)
5) Run the query

I looking to get rid of points 2) to 5) by replacing with a Command button on an Excel sheet

Sub Change_Criteria_And_Run_Query()

Dim mydbase As Object
Set mydbase = CreateObject("Access.Application")
mydbase.OpenCurrentDatabase ("C:My doucmentsDB1.mdb")

mybase."MyQuery"."Date Criteria" = Between (Worksheet("Sheet1").Range("A1").value) and (Worksheet("Sheet1").Range("A2").value)

>>>>>The above line of code I have problems to get right!

mydbase.DoCmd.RunMacro "MyQuery"

End Sub

View 9 Replies View Related

Vb Code To Sort Access Table By 4 Fields

Jan 27, 2007

The database I'm working with uses a lot of back end code to take Access tables and format and output them to Excel Files. After the table (FinalLoadCharttoExcel) has been created through the append query AppndFinalLCToExcel, I need to sort the table by the following fields: "Terminal Number," "State," "3 Digit Zip" and "Begin Zip" all in ascending order. I need to do this within the VB code. I wish I knew a way to get a screenshot of the table, but this is what it looks like unsorted:

Terminal Number State 3 Digit Zip Begin Zip
371 MA 011 78
371 MA 011 00
303 LA 701 06
303 FL 328 31
381 MO 716 04

After all the programs run, I need the table to look like

Terminal Number State 3 Digit Zip Begin Zip
303 FL 328 31
303 LA 701 04
371 MA 011 00
371 MA 011 78
381 MO 716 04

View 3 Replies View Related

Only Execute Code On A Write-access Basis, Not Read-only

Jul 6, 2009

I have recently used a before_close event on this workbook to save a backup of the open file to another location on my system. This works fine but I was wondering if there was some more code I could add to only execute this event on a write access basis.

The file I use can be viewed by anyone on the network as read-only and only certain users with a password can edit/update with a write access password.

The backup event is use executes every time the document is closed be it read-only or write-access.

Ideally I would like to add some code to only execute this backup if the file is opened on a write-access basis.

View 3 Replies View Related

Excel Code Works Fine But Error When Called From Access?

Apr 11, 2012

This code works fine when I run it in Excel.

Code:

Sub RemoveCodeAndSave()
'Remove all code from ThisWorkbook code module
ThisWorkbook.VBProject.VBComponents("ThisWorkbook").CodeModule.DeleteLines 1, _

[Code]....

I get the error "Run-time error 440: The specified dimension is not valid for the current chart type" why I am getting this. The macro does everything I want it to, except for throwing the error at the end.

View 3 Replies View Related

VBA Code To Change Pivot Table (Report Filter) From Userform Textbox / Combobox

Aug 16, 2013

I've prepared an excel file with a pivot table. Now I would like to change the Pivot "Report filter" by using Textbox on Userform. I've attached an excel file as an example.

View 2 Replies View Related

Excel 2010 :: VBA Code That Handles Several Specific Parameters Or Wildcard Passed To Access

Jul 17, 2013

I would like to develop a user-friendly Excel 2010 spreadsheet that would allow the user to enter from 1 to 10 (i just picked this number at random just to have an upper limit) employee numbers in cells A1-A10 and "click" on the VBA Code button that would invoke an Access Query and in the process return all the applicable data gathered from the query back into the Excel Spreadsheet. Believe it or not, I can do all this mentioned so far. BUT what i cant do is my second option for the user which is allow them to pull ALL of the employees back into the spreadsheet using the same query.

In summary, using Excel as a frontend dashboard, I know how to get a specific number of employees' information from a query and I know how to get all employees' information from a query but I dont know how to get either/or. In other words, I could do this with two queries and two "VBA-Code" buttons but I would like to do it with one query and one button.

View 1 Replies View Related

Creating Individual Report Cards (worksheets) Based On Template For Report Card

Aug 30, 2013

I have two worksheets in my report cards:

1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.

Student
Math
Reading
Science

Jimmy
75
84
100

[code].....

2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.

Student Name
=Data!$A2

Math
=Data!$B2

Reading
=Data!$C2

Science
=Data!$D2

How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?

I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.

View 1 Replies View Related

Copy Data From Weekly Report To Monthly Report

Jul 2, 2008

How do you create a macro to copy the information from my weekly reports to a monthly report and be able to update automatically. If you had 4 worksheets (for each week of the month) and 1 mastersheet for the whole month in a workbook. All titles are the same and If you needed to copy all the data that is in the columns, say, A through I, starting with row 4 to however many rows are in a given week. The reports can be made up of numicerial values, text and dates. Let me know if more information is needed or an example worksheet.

View 4 Replies View Related

Programmatic Access To Trust Access To Visual Basic Editor

Jan 10, 2007

I am Generating Excel file with Macro using my asp.net (c#) application.

I am able to generate Excel file in development environment, but in Production it gives following error:
"Programmatic access to Visual Basic Project is not trusted Line: Microsoft Office Excel"

I did googling a bit and found that I have to open Excel file physically make few security related changes in macro as below.

1. Open the Office application in question. On the Tools menu, click Macro, and then click Security to open the Macro Security dialog box.
2. On the Trusted Sources tab, click to select the Trust access to Visual Basic Project check box to turn on access.
3. Click OK to apply the setting. You may need to restart the application for the code to run properly if you automate from a Component Object Model (COM) add-in or template.

Can i do above changes at runtime (using some code)?

View 4 Replies View Related

Before Save Code Within Template

Feb 14, 2014

I am trying to create a beforesave code within my template. The template has certain fields that are blank and when the end user enters data, I want them to be able to click on save or the blue disk and it saves it to a new location, based on their user and some of the cells within the form. I do not want the template to be saved with the data they input. The data they input is saved only when they click the blue disk and it saves to another location, with their username and certain cells in the form. Then the end user can continue using that same template for the next entry and so on. I have a beforeclose that asks them if they really want to close or not. The only time they would close, or hit the big red X is when they are done with all their entries for the day. Here is my code for beforesave:

[Code] ......

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved