Error Message When Editing XY Chart Dynamic Source Data?

Feb 9, 2012

I am trying to create a simple xy graph in Excel 2010 using dynamic source data.

I have data in three columns.

There are headings on line 2 and the data starts on line 3.

A B C
1.
2. dp ss ff
3 .1 .2 .3
4 .3 .4 .4
5 .4 .8 .7
6 .1 .6 .8
7 .3 .5 .1
8 .5 .4 .4

I want to create an XY chart with C3 to C8 as the X axis (or dynamic to what ever the last data point is) with A3 to A8 as the Y axis (or dynamic to what ever the last data point is).

I have Defined names for C3 to C8 (myXvalues) and A3 to A8 (myYvalues).

I have created a simple XY graph and selected the ranges as normal.

This is =DATA(,Data!$C$3:$C$9,Data!$A$3:$A$9,1)

The page is named DATA

What I am trying to do now is to edit this range to make the range dynamic.Unfortunately I get error messages which ever way I try to edit the range.

I have tried:-

=SERIES('Data'!$c$3,'Data'!myXvalues,'Data'!$A$3,'Data'!myYvalues,1)
=SERIES('Data','Data'!myXvalues, 'Data'!myYvalues,1)
=SERIES(,Data!myXvalues,Data!$myYvalues,1)
=SERIES(Data!,Data!myXvalues,Data!myYvalues,1)

The data range can go from 8 to 30000 hence the need for a dynamic range!

PS: Also, is there any way to create this graph and dynamic source data in VBA. I have tried this with no success.

View 2 Replies


ADVERTISEMENT

Enable Editing Chart But Not Source Data?

Mar 18, 2014

is it possible to unlock a chart but then disabling to change the source data?

Background: I want the user to be able to add numbers etc. but he shouldn't see the underlying table...

View 2 Replies View Related

Dynamic Chart Source Data

Jul 27, 2007

In a workbook that I am working on, a macro runs to import data onto 9 separate sheets. The data is essentially x- and y- coordinates of a plot profile from another program. The problem that I am running into is that the number of data points can vary each time the data in imported based upon how the data was acquired.

If I were to put a drop-down list (Method1, Method2, Method3, etc.) on the Instructions page that I have for this workbook and have the user select which method was used prior to running the macro, could I then incorporate some sort of IF statement in the macro to vary the Source Data Series for the charts that I have created? Right now, I have the Source Data covering the scenario with the longest list of data points so when fewer points are used, the graph looks essentially useless.

View 5 Replies View Related

Dynamic Named Range As Chart Source Data

Jun 16, 2008

I've read through every thread I can find about dynamic named ranges as source data for a chart. It seems as if everyone can get it to work but me. I have a chart on one sheet that needs to update dynamically from data on another sheet when a button is clicked. Here's my code that runs when I click the button:

Sub Update_Center_Chart()
Sheets("Center Data Chart").Select
ActiveSheet.ChartObjects("Center Data").Activate
ActiveChart.SetSourceData Source = Range("CenterData")
End Sub

I get the error message: "Type mismatch." The data is in B1:F2 on a different sheet. The formula in the named range, "CenterData" is this:=OFFSET('Center Data'!$B$1,0,0,COUNT('Center Data'!$B:$B),4). The data will expand by 1 row every time.

View 5 Replies View Related

Automatically Adjust Dynamic Chart As Data Added To Source

Jun 19, 2008

Is there a way to make a chart adjust automatically when you add to the source data? I'm trying to use a named range in order to power a chart (something like chart_data=offset(a1,,, counta(a:a),counta(1:1)); the range is working fine). When I put "chart_data" into the source field for the chart, it seems to work fine; it picks up the right range... But when I later add more data, the chart source data field seems to have converted my named range into a hard-coded range, absolute range. So the dynamical named range updates, but the chart doesn't and I don't see the new data. Am I doing something wrong that I need to tweak? Does what I'm trying to do just not work? Is there another way to make the chart pick up the new data without adjusting the range?

View 3 Replies View Related

Create Dynamic Chart From Source Table?

Apr 17, 2014

I have a table of company data, and I want to be able to select different companies data and create a chart automatically perhaps by pressing a 'create' button.

The table data contains three values I want to populate in the chart: red & green sales which I would like shown as a stacked bar, and red as a percentage of total sales which I would like on a different axis as a line.

I tried to create a macro but my VBA skills are almost non-existent.

View 2 Replies View Related

Worksheet Protection From Editing And At The Same Time Allow All Data Source Links Within The Sheet To Be Refreshed

Mar 16, 2007

how to protect a worksheet from editing and at the same time allow all data source links within the sheet to be refreshed? I need my users to be able to refresh all data links as required but not be able to change the worksheet in any other way.

View 2 Replies View Related

Dynamic Charts & Error Message

Sep 14, 2006

I have created a dynamic chart, courtesy of the Jon Peltier website. I have 2 problems. No problem with getting the chart to work, the problem comes when I delete the data. I get an error message telling me that 'A formula in the worksheet contains one or more invalid references.' The other problem is that I cannot copy the worksheet to another worksheet in the same workbook. Well that is not strictly true, I can copy it but it wont updat. Any ideas as to how I can overcome this? Any suggestions welcome, apart from 'Don't delete the data then'

View 9 Replies View Related

Dynamic Chart Error For Multiple Series

Jan 17, 2014

I have created a dynamic chart for multiple series. I have created this using the offset function and have named 20 ranges. The problem I have is that if only 19 of the 20 named ranges are populated it reads that the worksheet contains one or more invalid references.

Is there a way to stop this from happening?

View 1 Replies View Related

Pivot Table - Dynamic Source Data

Sep 26, 2011

I am using pivot tables/charts for drilldown reporting. After running a complex macro to consolidate multiple reports into one range, I need to generate pivot tables and charts.

These reports will change month to month in the number of entries they have (template will be identical), and therefore my data source range for the pivot table is bound to change. Therefore my question is, how to develop a macro that will dynamically change the source data range to the amount of rows?

View 5 Replies View Related

Set Source Data For Chart Using R1C1

Mar 9, 2014

Everything else in my macro is using R1C1 format for ease of automation. However, I cannot get this to resolve. I am setting the source data for a line chart.

However, if I use A1 format it works just fine.

I am using R1C1 for automation purposes. A1 format will not easily work. I have the interpolated statement in there because the range contains some empty cells. I want excel to fill the line in the chart using interpolation. All the data in the columns(N through R or 14 through 18 in R1C1 format) is contiguous. I have not tried Union, but it seems I should just use this range like I do in the A1 format.

View 6 Replies View Related

Manipulating Chart Source Data With VBA

Aug 8, 2007

I have a chart that I am trying to set up with dynamic data. I have the chart created, but the problem is that I will have a variable number of categories based on the data that is loaded, so I need to use VBA to change the range for the source data and labels on the fly (otherwise, I will end up with 20-50 categories that are all zeroes, putting a bunch of gobbledegook at the top of the chart).

What commands to I need to enter into VBA to get this to work?

I have put a formula in 2 cells to determine based on the current data what the source data values range should be, and what the category labels range should be.

The cell that holds the value range is Graphics!L6, and the cell that holds the labels range is Graphics!L7.

The current values that these cells hold are:

L6:
=Graphics!$J6:$J9
L7:
=Graphics!$K6:$K9
Oh, and the name of the chart is "Chart 1"

What do I need to put into VBA to get the chart to change the data source values and category labels to the ranges I have listed in those 2 cells? (and for that matter, have I listed the ranges correctly in those 2 cells so that they are usable?)

If possible, I would prefer to do this without having to use code to select the chart, because I want the updates to the chart to be invisible to the user.

View 9 Replies View Related

Chart Not Reflecting Data Source

Jun 29, 2006

In my table I have rounded my values to a particular number of decimal places. BUT, the bars of my chart have the length of the original numbers. This is especially ridiculous when in the table there are only (rounded) zeros, and in the chart I get several bars with different length. how to plot the bars in the same length as the numbers in the table are?

View 9 Replies View Related

Chart: Selectable (ddl) Data Source

Aug 10, 2006

I have a sheet with logged test data.

Various test items are stored in columns.
(First row of each column is the description of the test item)

Problem:
1) To reflect certain testdata in a chart I want to be able to select a different column (Y values) by means of a dropdownlist.
X values are just the number of items (1 to ...)

How to make the charts data source selectable?

2) It seems that the input range of a ddl should be a list of items.

In my case they are in the first row of each column so only the first item is shown.

View 5 Replies View Related

Chart With Changing Source Data

Aug 11, 2006

I am trying to create a macro which will allow me to change the source data for a particular chart. what i want to do is to have a code which looks in a range of cells (A8:B28) and then updates the chart to only include those cells within the range that contain a value? The number of cells with values changes depending on what options are selected elsewhere in the spreadsheet.

View 2 Replies View Related

Change Chart Source Data From Add-in

Aug 9, 2007

I have an excel addin that contains chart templates. Without going into too much detail a user will select an option which will update these templates then move the charts along with the source data to a new workbook. My question is this; How do I change the chart references programatically so that the chart data now points to the source data in the new workbook.

View 5 Replies View Related

Prevent Now Available For Editing Message

Jun 29, 2007

I have an accounting spreadsheet that is used by 25-30 people. This spreadsheet has a button the user can use to save this spreadsheet allowing the spreadsheet to save itself to a specific folder path base on the dates entered in the spreadsheet.

I have begun tracking certain items in the accounting spreadsheet and have added a section to the save macro that gathers data from the accounting spreadsheet and saves the data to a ‘Spreadsheet Stats’ spreadsheet. Since it was possible that more than one person might try saving the spreadsheet at the same time and try to open the ‘Spreadsheet Stats’ spreadsheet at the same time, I placed a loop in the macro that determines if the 'logging data' spreadsheet when opened is marked as "read-only". If the ‘Spreadsheet Stats’ spreadsheet is opened as "read-only", the macro closes the ‘Spreadsheet Stats’ spreadsheet then reopens the ‘Spreadsheet Stats’ spreadsheet again and again until opened without the "read-only" status. Code seen below.

Do Until Now() = start_time + 0.002082 Or Now() > start_time + 0.002082
Workbooks.Open Filename:= _
"G:EDCUSTSERV1_ACCTGIPL SpreadsheetsBilling SpreadsheetsData DropSpreadsheet Stats.xls"
Set WB = ActiveWorkbook
If WB.ReadOnly = False Then
Exit Do
End If
WB.Close
Loop

The macro works great, however, should a user try to save the spreadsheet and the loop happens to open and reopen the spreadsheet until the "read-only" status is gone, when the macro completes, a window pops up and alerts the user that the ‘Spreadsheet Stats’ spreadsheet is now available for editing.

My question: Is there any way to prevent that pop up window? I don’t want the user to think they need to edit the ‘Spreadsheet Stats’. Remember that the macro has completed when the popup window shows up, so Application.display alerts set to false

View 2 Replies View Related

Color Chart Data Points By Cell Values Of Non-Source Data

Apr 14, 2008

I have a bar chart that was made from table 1 which has the value in it. I have another table, table 2 that has the name corresponding to the value in table 1. I want to color data points in a bar chart with a different color for each name I have in table 2. I also want to give a data label in the data points with the value I have in table 2 instead of the original data label from table 1. Is it possible to do it?

View 3 Replies View Related

Chart Source Data: Union Of Every N Cell

Sep 19, 2006

I have 4 sheets. In each sheet, I have a column of data for every hour of every day of one year.

In the 1st worksheet, I want to make a chart using :

- for Y values : the average of the data for each day
- for X values: the day

In the 3 other worksheets,
- for Y values : the data for each hour
- for X values: the hour

To make it more simple, I will first build in the "D" column the data of the average data for each day (so, every 24 columns)

Here is my

Dim lNbSheet As Long ' sheet number
Dim rSheetData As Range ' what will be my Y values
Dim rSheetTime As Range ' what will be my X values
Dim sSheetName As String ' current sheet

For lNbSheet = 1 To 4

'selection of the Y values
Sheets(lNbSheet).Select
sSheetName = ActiveSheet.Name

I get the error "methode SeriesCollectiosn of Object _chart failed;

Also, if you have an idea that could make me avoid writing all the new average-for-the-day data in column D (using it directly),

View 8 Replies View Related

Graph & Chart: Data Source Changes Monthly

Nov 19, 2006

I am trying to write a macro that will automatically change the source data for a graph. This is an existing graph that is on tab GraphYTD and the data for the graph comes from DataYTD. The number of rows of data will change monthly, but I would like to use the same graph template every month. Here is my

Sub SortYTD()
Dim myBottom As Long
myBottom = Sheets("DataYTD"). Range("B65536").End(xlUp).Row
ActiveChart.SetSourceData Source:=Sheets("DataYTD").Range("F2:I" & myBottom)
ActiveChart.Location Where:=xlLocationAsObject, Name:="GraphYTD"

End Sub

I am getting Runtime error 91 - object variable or with block variable not set.

View 3 Replies View Related

Link Spinbutton To Chart Data Source

Nov 21, 2006

For example, if my graph currently shows B1:L1 range, how by clicking a spin button to make the graph show B2:L2 range?

...

View 9 Replies View Related

Changing Chart Source Data Range

Nov 30, 2006

Each week I have to add a new column to a report and then update the source data of all the charts that use that newly added column. I am trying to create a macro that will use the last 12 columns of data located on a different worksheet as the range for the source data of the chart. I have attached an excel document that contains an example of how one of the charts that I am using looks and where it pulls the data from.

View 3 Replies View Related

Code To Change Chart Source Data

Jul 16, 2007

I am in the middle of building a macro for some data to be automated. I have two sheets, one of which has an existing chart but the data has been removed so now there is no values on the chart. I then have a second sheet with data on it. The range is b4:c16. I want to point this data onto my chart on the other sheet.

View 2 Replies View Related

VBA - Retrieve Chart Series Source Data In Range?

Jan 13, 2010

Currently I'm working in an excel file that contains a lot of charts. I want to write a macro that changes the source data of every serie in every chart. It only needs to add extra rows. But as every series has different columns where they get the data from, how can I change the rows without changing the columns?

This is what I've written so far:

Code:
Sub ammend_datarange_series_all_charts()
Dim start_cell As String, end_cell As String
Dim chart_tot As Integer, c As Integer, s As Integer

[Code]....

As you can see I've tried two things, first I tried to change the string of the source data, however this meant that every series would have C and E as their source data. So I wanted to retrieve the x and y values in string format. This does not work yet, it returns an array with the values of all the entries in the series source data. From that array I can not retrieve the column where the data came from.

View 4 Replies View Related

Combination Chart: Present Source Data Differently

Sep 27, 2006

I've taken over a spreadsheet and been asked to produce various charts. One chart in particular asks for views of the following (hyperthetical) data from different workbooks on the same sheet

July 06 - 24%
June 06 - 22%
May 06 - 29%
April 06 - 21%

overlaid with this data

April 06 - 42
May 06 - 68
June 06 - 47
July 06 - 55

The problem I'm having is that firstly, the dates are presented the opposite way round, and secondly one set of data is in percentages, the other in basic integers. The spreadsheet data is large, and historically has always been done like this so it's not easy to change the way its presented, but is there an easy way to show it in a combination chart?

View 6 Replies View Related

Copy Chart Without Source Data & Retain Formatting

Feb 21, 2008

I have 2 sheets in one workbook; one sheet has a chart with a data table, the other contains the source data for the chart. I want to copy and move the sheet with the chart to a new workbook, but without the source data. I break all links, but then the chart's data table takes the default values and formats in the new workbook after I break the links. For examples, the source data has formats such as currency and no decimal places. However, after copying the sheet, the data table reverts to no dollar sign and decimal places. In addition, the months on the x-axis turn to numbers when the links are broken.

View 3 Replies View Related

Macro Code Create Pivot Table Based On Dynamic Source Data

Nov 28, 2006

The "Sum" sheet can change its number of rows. The pivot table is based on it. I'm having trouble with the SourceData portion of the code in my macro ....

View 9 Replies View Related

Sorting Chart Legend To Match Source Data Order

Feb 23, 2012

The order of entries in my chart legend make no sense to me. Why is it not matching the order of the source data?

View 1 Replies View Related

Changing Chart Source Data Based On Running Date

Apr 4, 2007

I currently have a simply bar chart that is based on a running 5 days figure so the X-axis is like 01-Mar 02-Mar 03-Mar ...

Y-Axis is the data that I am trying to present - Total $

The source of this data is simply two columns - Column A is the running date, Column B will be data.

Daily I need to only present 5 days historical data based on the latest date i.e. today and the past four days (the source data is updated daily).

Can a macro be used to auto update the bar charts based on today's date?

View 9 Replies View Related

Copy Chart To New Sheet & Have Charts Source Data Reference It

Jan 24, 2008

Sheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved