Sheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.
View 3 RepliesI have 2 sheets in one workbook; one sheet has a chart with a data table, the other contains the source data for the chart. I want to copy and move the sheet with the chart to a new workbook, but without the source data. I break all links, but then the chart's data table takes the default values and formats in the new workbook after I break the links. For examples, the source data has formats such as currency and no decimal places. However, after copying the sheet, the data table reverts to no dollar sign and decimal places. In addition, the months on the x-axis turn to numbers when the links are broken.
View 3 Replies View RelatedI am copying the entire contents of a worksheet onto a blank worksheet multiple times. The problem occurs with the charts which need updating once copied to reference the new worksheet name. I have tried stepping through each chart and then each SeriesCollection but it seems to fall over part way through.
View 2 Replies View RelatedIf there a way to change the souce data so that it changes based on a variable? For example, if a cell's value equals X then use one range and if it is Y then use a different. As far as I can tell you cannot use the "IF" argument in a chart Source field.
One option I came up with is to change the actual data on a worksheet and always have the source data point to that range in the worksheet. The problem is that the source data is not always the same length (Monthly may be 100 columns long while Daily is 1000 columns long - the chart looks starnge).
for example: ...
I am wondering if there is a way to take the charts I have created, and save them on a different worksheet in Excel. The issue I have is that when I erase the data source, the charts lose all their data. Is there a way to save the chart as is without it relying on its data source (ex. So I can remove the data for the chart)?
View 2 Replies View RelatedFor some reason, the charts in my excel workbook do not update automatically when the data are changed. I have set Calculation to Automatic, but it still doesn't work. They update only if I close and reopen the workbook. Is it due to a problem with setting? How can I get the charts to automatically update?
View 4 Replies View RelatedI have a source sheet which contains data. Within this data there is a column (column 3) called Name and I would like to take the data from this sheet and paste it onto a new sheet but in grouped format. So take all instances where it finds criteria 1, then 2 and so on and just paste it on a new line each time it finds a criteria. So far I have the following code to search
Sub loopy()
Dim rngTemp As Range ' the range variable declaration
Dim intCounter As Integer 'counter as integer
' the following loop goes through all the cells in column a up until the last used cell in the column
For Each rngTemp In Range("a1", Range("a" & Rows.Count).End(xlUp))
'increment the counter if the cell has value fridge
If rngTemp = "Fridge" Then intCounter = intCounter + 1
Next rngTemp
MsgBox "There were " & intCounter & " cells equal to Fridge"
End Sub
I have a sheet ( Graphs A) with 50+ graphs on all linked to a datasheet (Data A).
I now want to copy these graphs to another sheet (Graphs B) which links to a different data sheet (Data B). The data is in the same layout format etc.
The problem is that the find-replace function will not replace the sheet name in the charts series formula from Data A to Data B
Is there an easy way to change the source sheet for the new graphs?
I have an excel which creates PPT from the excel. but the graph pasted in PPT are not aligned and formatted.
By aligned, i mean re-size the graph and paste in a formatted fashion (currently they are overlapping each other)
My entire PPT created is off alignment and formatting. E.g heading are not properly aligned (they are touching the line below) and so on.
I am trying to graph the following data in an area chart with line charts superimposed on the area chart. I have a lot of data (and a lot going on) so I'm trying to figure out the best way to show this in excel from a functional standpoing (i can't get this to work in excel!!) to also an asthetic standpoint (dont want it to look terrible or illegible). This is what I'm trying to chart:
1) Weather data (temperature) by region:
So one region, would be: Northwest
I would like the "area" (so a shaded region) to be the min/max of the temperature data for each month.
2) I would like to show the temperature for each year as a line graph on the chart - so you can see if a year falls in or out of the shaded region.
3) I would like to show a company's sales increases across the same months per year as separate line charts. I may choose to just show the biggest outlier year in the end... or to show 2006 (the latest data).
What I am trying to convery with the chart is that the company's sales is or is not tied to weather deviations. I have attached an excel file with the data. I haven't been able to use the area chart or get a two axis chart to work or get it to look even remotely professional.
Everything else in my macro is using R1C1 format for ease of automation. However, I cannot get this to resolve. I am setting the source data for a line chart.
However, if I use A1 format it works just fine.
I am using R1C1 for automation purposes. A1 format will not easily work. I have the interpolated statement in there because the range contains some empty cells. I want excel to fill the line in the chart using interpolation. All the data in the columns(N through R or 14 through 18 in R1C1 format) is contiguous. I have not tried Union, but it seems I should just use this range like I do in the A1 format.
I have a chart that I am trying to set up with dynamic data. I have the chart created, but the problem is that I will have a variable number of categories based on the data that is loaded, so I need to use VBA to change the range for the source data and labels on the fly (otherwise, I will end up with 20-50 categories that are all zeroes, putting a bunch of gobbledegook at the top of the chart).
What commands to I need to enter into VBA to get this to work?
I have put a formula in 2 cells to determine based on the current data what the source data values range should be, and what the category labels range should be.
The cell that holds the value range is Graphics!L6, and the cell that holds the labels range is Graphics!L7.
The current values that these cells hold are:
L6:
=Graphics!$J6:$J9
L7:
=Graphics!$K6:$K9
Oh, and the name of the chart is "Chart 1"
What do I need to put into VBA to get the chart to change the data source values and category labels to the ranges I have listed in those 2 cells? (and for that matter, have I listed the ranges correctly in those 2 cells so that they are usable?)
If possible, I would prefer to do this without having to use code to select the chart, because I want the updates to the chart to be invisible to the user.
In my table I have rounded my values to a particular number of decimal places. BUT, the bars of my chart have the length of the original numbers. This is especially ridiculous when in the table there are only (rounded) zeros, and in the chart I get several bars with different length. how to plot the bars in the same length as the numbers in the table are?
View 9 Replies View RelatedI have a sheet with logged test data.
Various test items are stored in columns.
(First row of each column is the description of the test item)
Problem:
1) To reflect certain testdata in a chart I want to be able to select a different column (Y values) by means of a dropdownlist.
X values are just the number of items (1 to ...)
How to make the charts data source selectable?
2) It seems that the input range of a ddl should be a list of items.
In my case they are in the first row of each column so only the first item is shown.
I am trying to create a macro which will allow me to change the source data for a particular chart. what i want to do is to have a code which looks in a range of cells (A8:B28) and then updates the chart to only include those cells within the range that contain a value? The number of cells with values changes depending on what options are selected elsewhere in the spreadsheet.
View 2 Replies View RelatedIn a workbook that I am working on, a macro runs to import data onto 9 separate sheets. The data is essentially x- and y- coordinates of a plot profile from another program. The problem that I am running into is that the number of data points can vary each time the data in imported based upon how the data was acquired.
If I were to put a drop-down list (Method1, Method2, Method3, etc.) on the Instructions page that I have for this workbook and have the user select which method was used prior to running the macro, could I then incorporate some sort of IF statement in the macro to vary the Source Data Series for the charts that I have created? Right now, I have the Source Data covering the scenario with the longest list of data points so when fewer points are used, the graph looks essentially useless.
I have an excel addin that contains chart templates. Without going into too much detail a user will select an option which will update these templates then move the charts along with the source data to a new workbook. My question is this; How do I change the chart references programatically so that the chart data now points to the source data in the new workbook.
View 5 Replies View RelatedIn cell A1 I have a forumlar which equals 'A2:F1465' which is the range of my data, how can I get a pivot table to use this for it's values as when I do it normally it asks me to manually select the range as above?
View 2 Replies View RelatedI have created a line chart that plots weight of a person, but want to show on the plot area what a certain range of weight represent, Ive attached images to show this concept.
View 4 Replies View RelatedI have a bar chart that was made from table 1 which has the value in it. I have another table, table 2 that has the name corresponding to the value in table 1. I want to color data points in a bar chart with a different color for each name I have in table 2. I also want to give a data label in the data points with the value I have in table 2 instead of the original data label from table 1. Is it possible to do it?
View 3 Replies View Relatedis it possible to unlock a chart but then disabling to change the source data?
Background: I want the user to be able to add numbers etc. but he shouldn't see the underlying table...
I have 4 sheets. In each sheet, I have a column of data for every hour of every day of one year.
In the 1st worksheet, I want to make a chart using :
- for Y values : the average of the data for each day
- for X values: the day
In the 3 other worksheets,
- for Y values : the data for each hour
- for X values: the hour
To make it more simple, I will first build in the "D" column the data of the average data for each day (so, every 24 columns)
Here is my
Dim lNbSheet As Long ' sheet number
Dim rSheetData As Range ' what will be my Y values
Dim rSheetTime As Range ' what will be my X values
Dim sSheetName As String ' current sheet
For lNbSheet = 1 To 4
'selection of the Y values
Sheets(lNbSheet).Select
sSheetName = ActiveSheet.Name
I get the error "methode SeriesCollectiosn of Object _chart failed;
Also, if you have an idea that could make me avoid writing all the new average-for-the-day data in column D (using it directly),
I am trying to write a macro that will automatically change the source data for a graph. This is an existing graph that is on tab GraphYTD and the data for the graph comes from DataYTD. The number of rows of data will change monthly, but I would like to use the same graph template every month. Here is my
Sub SortYTD()
Dim myBottom As Long
myBottom = Sheets("DataYTD"). Range("B65536").End(xlUp).Row
ActiveChart.SetSourceData Source:=Sheets("DataYTD").Range("F2:I" & myBottom)
ActiveChart.Location Where:=xlLocationAsObject, Name:="GraphYTD"
End Sub
I am getting Runtime error 91 - object variable or with block variable not set.
For example, if my graph currently shows B1:L1 range, how by clicking a spin button to make the graph show B2:L2 range?
...
Each week I have to add a new column to a report and then update the source data of all the charts that use that newly added column. I am trying to create a macro that will use the last 12 columns of data located on a different worksheet as the range for the source data of the chart. I have attached an excel document that contains an example of how one of the charts that I am using looks and where it pulls the data from.
View 3 Replies View RelatedI am in the middle of building a macro for some data to be automated. I have two sheets, one of which has an existing chart but the data has been removed so now there is no values on the chart. I then have a second sheet with data on it. The range is b4:c16. I want to point this data onto my chart on the other sheet.
View 2 Replies View RelatedCurrently I'm working in an excel file that contains a lot of charts. I want to write a macro that changes the source data of every serie in every chart. It only needs to add extra rows. But as every series has different columns where they get the data from, how can I change the rows without changing the columns?
This is what I've written so far:
Code:
Sub ammend_datarange_series_all_charts()
Dim start_cell As String, end_cell As String
Dim chart_tot As Integer, c As Integer, s As Integer
[Code]....
As you can see I've tried two things, first I tried to change the string of the source data, however this meant that every series would have C and E as their source data. So I wanted to retrieve the x and y values in string format. This does not work yet, it returns an array with the values of all the entries in the series source data. From that array I can not retrieve the column where the data came from.
I've taken over a spreadsheet and been asked to produce various charts. One chart in particular asks for views of the following (hyperthetical) data from different workbooks on the same sheet
July 06 - 24%
June 06 - 22%
May 06 - 29%
April 06 - 21%
overlaid with this data
April 06 - 42
May 06 - 68
June 06 - 47
July 06 - 55
The problem I'm having is that firstly, the dates are presented the opposite way round, and secondly one set of data is in percentages, the other in basic integers. The spreadsheet data is large, and historically has always been done like this so it's not easy to change the way its presented, but is there an easy way to show it in a combination chart?
I've read through every thread I can find about dynamic named ranges as source data for a chart. It seems as if everyone can get it to work but me. I have a chart on one sheet that needs to update dynamically from data on another sheet when a button is clicked. Here's my code that runs when I click the button:
Sub Update_Center_Chart()
Sheets("Center Data Chart").Select
ActiveSheet.ChartObjects("Center Data").Activate
ActiveChart.SetSourceData Source = Range("CenterData")
End Sub
I get the error message: "Type mismatch." The data is in B1:F2 on a different sheet. The formula in the named range, "CenterData" is this:=OFFSET('Center Data'!$B$1,0,0,COUNT('Center Data'!$B:$B),4). The data will expand by 1 row every time.
I am trying to create a simple xy graph in Excel 2010 using dynamic source data.
I have data in three columns.
There are headings on line 2 and the data starts on line 3.
A B C
1.
2. dp ss ff
3 .1 .2 .3
4 .3 .4 .4
5 .4 .8 .7
6 .1 .6 .8
7 .3 .5 .1
8 .5 .4 .4
I want to create an XY chart with C3 to C8 as the X axis (or dynamic to what ever the last data point is) with A3 to A8 as the Y axis (or dynamic to what ever the last data point is).
I have Defined names for C3 to C8 (myXvalues) and A3 to A8 (myYvalues).
I have created a simple XY graph and selected the ranges as normal.
This is =DATA(,Data!$C$3:$C$9,Data!$A$3:$A$9,1)
The page is named DATA
What I am trying to do now is to edit this range to make the range dynamic.Unfortunately I get error messages which ever way I try to edit the range.
I have tried:-
=SERIES('Data'!$c$3,'Data'!myXvalues,'Data'!$A$3,'Data'!myYvalues,1)
=SERIES('Data','Data'!myXvalues, 'Data'!myYvalues,1)
=SERIES(,Data!myXvalues,Data!$myYvalues,1)
=SERIES(Data!,Data!myXvalues,Data!myYvalues,1)
The data range can go from 8 to 30000 hence the need for a dynamic range!
PS: Also, is there any way to create this graph and dynamic source data in VBA. I have tried this with no success.