I have created a dynamic chart for multiple series. I have created this using the offset function and have named 20 ranges. The problem I have is that if only 19 of the 20 named ranges are populated it reads that the worksheet contains one or more invalid references.
Is there a way to stop this from happening?
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
I am looking for a quick way to create a number charts using data from multiple sheets.
I have 12 sheets Apr - Mar that contain data in identical format. I also have sheets 12 sheets Apr Charts - Mar Charts, I need to create a number of charts on each sheet for the relevant month. To avoid having to create a ridiculous number of charts, I thought I would try to dynamically change the chart data series based on a value in say cell A1.
For example if cell A1 of the Apr Charts sheet = Apr, the chart will show the data for Apr.
The idea is that I can copy the Apr Charts sheet the required number of times and replace the value in A1, and my charts will update dynamically. I need to have seperate sheets for each of the monthly charts.
I would like to update a chart after I have updated the underlying data just by clicking a button and displaying the updated date in the chart. Does anyone know how to do this? Currently I am having to manually click on the graphs line in the chart, which highlights the columns data, then manually extend this for the chart to update. And then I am manually typing in a date cell in the chart. There MUST be a cool way to do this.
View 6 Replies View RelatedI have a chart with Data Series being dynamic ranges. There is only one series and x & y each have a dynamic range. I need to be able to include Series Name as a dynamic range.
For example. I have 3 rows of values with 3 columns.
Col 1 Col 2 Col 3
Name X-Val Y-Val
A 1 3
B 4 6
C 8 0
I now need a chart that has 1 series with a x range of col2 and a y range of column 3 but a corresponding name equal to Col 1. So when I move my mouse over each point I get the series name. E.G. I hover over poing 1,3 I show the name as A. Or I hover over point 8,0 I get C.
If it isnt possible using the ranges the way I am, then I would be looking for a possible solution. I am sure I could do this by some sort of loop but not quite sure given the number of rows constantly changes.
Using the Dynamic Named Range tip, I defined named variables as follows:
Xrange=OFFSET($A$2,0,0,COUNT($A:$A),1)
Yrange=OFFSET($B$2,0,0,COUNT($B:$B),1)
then tried to define my Chart series as follows:
=SERIES($B$1,Xrange,Yrange,1)
but it gives an invalid reference error. What am I doing wrong?
I've created my dynamic named ranges using the OFFSET function, ex.
="OFFSET(SAMPLE!$D$4,1,0,COUNTA(SAMPLE!$D:$D)-1,1)"
I'm now trying to get my chart to use that range. I read at [URL] .... that I need to make sure my series reference is a fully qualified reference. So I've entered that series reference using the name of the workbook followed by the range name (=2012-PIRS.xlsx!SAM_CLAR2DEL). I have two copies of my workbook (one as xlsm with VBA project, and one with xlsx without VBA) and I can't get Excel to accept the series value in either workbook.
ERROR MSG:
The formula you typed contains an error. Try one of the following:
- Make sure you've included all parentheses and required arguments.
- To use a function, click Insert Function on the Formulas tab (in the Function Library group).
- If you include a reference to another sheet or workbook, verify that the reference is correct.
- If you are not trying to enter a formula, avoid.........
I am attempting to use a dynamic named range in a chart data series as described in Excel Hacks (Hack #42 and Hack #52).
Using Insert|Name|Define I have created a named range called CashFlowSaleChartDataRange that is set to the following value:
=OFFSET('Cash Flow-Sale'!$O$10,0,0,NumFlows,1)
When I subsequently assign a reference to this named range in the data series dialog it will accept the answer and my chart will adjust to reflect the updated range. However, if I return to the data series dialog, I now see the range address returned by the OFFSET function rather than the named range reference.
I am running Excel 2003 on a Win7 system.
Here is my situation:
Each of my data sets spans roughly 75 columns by 250 rows at present, but this could expand. The first 7 rows contain metadata. Columns 2-25 or so contain the raw data, from which everything to the right is calculated. The data sets have most columns in common, but not necessarily all.
In order to tease out the most meaningful information from my data, I frequently sort all or part of it based on varying criteria. When I find a useful sorting criterion, I create a new column with a header that describes the criterion and populate it with a formula that returns a 1 if the condition of interest is met for that row, or a 0 if it is not. For example, if I am doing this in column AA, I might enter
=--(AND($AX8>$AA$4,$Y8>0))
and copy it down to the end of the data. The resulting vector of 1s and 0s quickly re-identify data that meets that criterion even after subsequent resorting. It also makes locating data that meets multiple sorting criteria extremely simple. Essentially, I create a truth table.
Cell $AA$4 in the above example contains a "comparator" value I might wish to change at some point, which would change the subset of data the condition selects for.
Here's the first hard part:
For each data set, I need the ability to generate meaningful plots that includes separate series based on the criteria I have described. However, I also need to retain the ability to resort the data or change the comparator value without disrupting these plots. In other words, the plots must NOT change when the order of the data is changed, but MUST change to display the appropriate data when the comparator changes.
Here's the 2nd hard part:
Once I have this working for one data set, I need to be able to port it to other data sets (which are contained in other workbooks), so that I can compare equivalent plots from each. I also need to minimize the number of manual steps involved in doing so, to avoid human errors and excessive time consumption.
The only other possible complication I can think of at the moment is that, to this point, I have been inserting blank rows to isolate subsets that I do not wish to perform further sorting on from each other.
Right now I am angling toward VBA code that loops through the entire data set to generate base dynamic ranges using the column header row (row 1) as the names, and the entire column of data for the rangeloops through the truth table columns to generate "branch" row ranges for each of the sorting conditions,loops through the entire data set one more time to create "branch" ranges for each of the base ranges.
I could generate some code to accomplish a one-off solution for a given configuration of a single data set (provided there is not a list length limit in a chart series that I'd be violating)...but without a dynamic named range, I don't know how to get to something that would update appropriately. So in essence, I am still stuck at the dynamic range part of this.
I have used named ranges to make a chart automatically adjust to a changing list of products in one column, but I do not know how to do this with multiple series. If I want to add products to this table, how can I make my chart dynamically adjust multiple series?
So the chart range is currently E5:H10. But I would need it to go beyond row 10 when I add new items.
Sheet1
*EFGH5*Week 1Week 2Week 36Product 11,234,123 1,258,805 1,283,982 7Product 21,234,223 1,258,907 1,284,086 8Product 33,423,321 3,491,787 3,561,623 9Product 4342,121 348,963 355,943 10Product 52,343,424 2,390,292 2,438,098
Excel tables to the web >> Excel Jeanie HTML 4
I have several dynamic charts using named ranges, but I am charting 1 series of data. What about when I have multiple data sets or series and do not want to use PivotTables? Do I really have to make each one a named range? If that's the case, using VBA looks much simpler.
View 2 Replies View RelatedI have a chart with 3 series':
Series1
Series2
Series3
The chart is called chtEngagement. I want to use vb to update these series'.
Series1 should be shown as:
I have a scatter graph that has over 100 curves that im need on one graph that at the moment i putting each x and y and name in by hand in series. I have been doing it for hours and have looked round the site to see if anything similar answer on ozgrid would help but im baffled
i was just wondering if there is an easier way of doing this
i havent really used macros but iv been reading up on it can i used it to do this?
I have added the table and graph and this is how i would like all the columns to look like
its the table called graph that makes the curves that i would like to be able to add in quickly
the rest im not too fussed about.
I have a log where I'm recording daily readings of a pipette. Each day three readings are taken and I have each stored as a dynamic range so that I can monitor how in control my process is. However, when I graph it, I would like it to be one continuous line graph (Three readings from day one followed by three readings from day two, etc.). I'm having difficulty doing any sort of combination.
View 7 Replies View Relatedhow can i plot multiple series of values in one graph after checking some check boxes, which i have previously done, randomly?
View 4 Replies View RelatedI have a chart that combines 2 xy plots and a set of stacked columns ( total of 4 series).
I can adjust the series ordering between the 2 xy plots, and between the stacked columns, but not for all 4 at the same time.
I'd like the legend to show up as:
Series1, Series2, Series3, Series4
where 1 and 2 are the xy plots and 3 & 4 are the components of the stacked columns.
It is currently:
Series3, Series4, Series1, Series2
Any idea how to re-order the legend entries?
My friend has set up an excel workbook with a sheet for every month (labelled Jan graphs, Feb graphs, Mar graphs etc) which has 7 pie charts per sheet. The problem is the pie charts are showing the 0% fields and the data labels are overlapping. I have found a macro that gets rid of the 0% labels but I need to repeat the macro for all the 7 charts on each sheet and all 12 worksheets for each month of the year. I am very new to VBA and coding of any type and have looked but can't find the solution.
The macro I am currently using for "Chart1" on "Jan graphs" is below. The charts are labelled Chart1, Chart2, Chart3 etc.
Sub ClearLabels()
Worksheets("Jan graphs").ChartObjects("Chart 1").Chart.ApplyDataLabels _
Type:=xlShowLabelAndPercent
For Each x In Worksheets("Jan graphs").ChartObjects("Chart 1"). _
Chart.SeriesCollection(1).Points
I am trying to create a simple xy graph in Excel 2010 using dynamic source data.
I have data in three columns.
There are headings on line 2 and the data starts on line 3.
A B C
1.
2. dp ss ff
3 .1 .2 .3
4 .3 .4 .4
5 .4 .8 .7
6 .1 .6 .8
7 .3 .5 .1
8 .5 .4 .4
I want to create an XY chart with C3 to C8 as the X axis (or dynamic to what ever the last data point is) with A3 to A8 as the Y axis (or dynamic to what ever the last data point is).
I have Defined names for C3 to C8 (myXvalues) and A3 to A8 (myYvalues).
I have created a simple XY graph and selected the ranges as normal.
This is =DATA(,Data!$C$3:$C$9,Data!$A$3:$A$9,1)
The page is named DATA
What I am trying to do now is to edit this range to make the range dynamic.Unfortunately I get error messages which ever way I try to edit the range.
I have tried:-
=SERIES('Data'!$c$3,'Data'!myXvalues,'Data'!$A$3,'Data'!myYvalues,1)
=SERIES('Data','Data'!myXvalues, 'Data'!myYvalues,1)
=SERIES(,Data!myXvalues,Data!$myYvalues,1)
=SERIES(Data!,Data!myXvalues,Data!myYvalues,1)
The data range can go from 8 to 30000 hence the need for a dynamic range!
PS: Also, is there any way to create this graph and dynamic source data in VBA. I have tried this with no success.
What I want to achieve is a script that would create a new scatter plot of multiple series from a selected block of cell. I found a thread that was similar but what is different from my data is that my x values are different for each series.
The format of the data is in the following format, the first series will the first x,y pair, the 2nd series would be the second x,y pair. I don't know if it'll be an issue but one thing is that the date might be different lengths. For instance, the 3rd series, only has 4 data points, whereas the other series contains 6 data points?
x0.200.400.600.801.001.20
y5.002.501.671.251.000.83
x0.100.200.300.500.701.30
y5.002.501.671.000.710.38
x0.100.300.400.50
y6.672.221.671.33
So essentially, is there a way I can have the script say, select your range, and then graph the selected range as a scatter plot?
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies View RelatedI have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
I want to use a macro to change attributes of a series in a chart. Unbelievably, if the series has been pasted into the chart from another chart, and although the macro can address the series and even return values (eg name) correctly, the selection simply cycles to one of the original series on the chart.
View 3 Replies View RelatedI have a graph that auto updates but sometimes there is only 1 series and sometimes there is 2,3,4, or 5 series. Is there a way to have the graph update accordingly? and only have have the series that are valid be in the key on the graph. Currently the graph keeps all the series in the key even when there isn't any data for it.
Please see attachment. Use sheet 2 for the graph. and use the drop down menu to select catagory. this ia very quick mock up of the concept.
Graphseries.xlsx
I've created one file: Mappe1_results.xlsm
This file ask in another file "Mappe1_ground.xlsx" for "B" and "N". Now one new sheet is created with the name "month-2014" and shows me which Category (B) is how often referred in one month. After that one chart is created for a better representation. This can be done for every month (which month is selected by the user over the button "Auswertung" in Sheet "Tabelle1").
Now I have a few problems / requirements:
1. If one user is using (maybe) Jan as his selected month, in the sheet "Auswertung" should be one duplicated chart of the Jan Chart., with no other (previous) series. Because Jan has no previous conditions (prev. year).
1.1 If one user is using another month (maybe Feb), in the sheet "Auswertung" should be one chart with both series of Jan and Feb and so one (for the other months). So that in "Auswertung" the chart is one comparison over the months. Only Feb/Mar/Apr/May/Jun/Jul/Aug/Sept/Oct/Nov/Dec have one prev. month.
For example: If one user write "Apr" into the inputbox and "Mar" is in the sheet existing, so in the chart of "Auswertung" should be April and March shown.
Some functions are set in my macros, but the problem is that the results are not equal between the sheet "Auswertung" and maybe "Jan-2014" or "Feb-2014". Because in "Auswertung" we need called all Categories (they can be found in "Referenz" - A).
All what I want is in "Auswertung" one chart with all present categories of "Referenz" - A and the series of the created sheets by the user.
2. The next problem is, every created sheet has one legend "Anzahl im ..." - this legend of every series should be shown in "Auswertung", too. So that we know which color is for which month, u know.
I'm attempting to create a dynamically built donut chart using VBA, but I'm having trouble inserting a variable to be used as one of the values.
The chart graphs 3 data points:
ASC GP - Located in cell T4
ACC GP - Located in cell AE4
ACT GP - variable called LocSumActGP
The code snippet I assumed would work looked like this:
Code:
.SeriesCollection(1).Values = "='Location Summary'!$T$4,'Location Summary'!$AE$4," & LocSumActGP
But it doesn't seem to like that.
