Excel 2010 :: Getting Outlook Warning (2010) While Sending Email Through Macro
Mar 25, 2014
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
Would like to find a formula or macro which would automatically send an email to let me know when a date entered into the specific cell is coming close to expiration. e.g. if the date 01/05/2014 is entered into a cell i would like an email to be sent to me a month before the date is reached (01/04/2014).
I run excel 2010 on a windows 8.1 machine. In excel I have email address that I need to mail from however when I click the hyperlink it automatically directs me to Hotmail. Is there a way to change that to automatically load Outlook instead?
I have an excel workbook (Excel 2010) consisting on 30 sheets, I would like to add a command button to one (1) of the sheets that would attach just that sheet and not the whole workbook to my Outlook 2010 email, is this possible. What would the code look like.
what is the proper terminology for the Outlook "Thing" that opens up in excel (shown below)? Is it simply a toolbar? Add-in?
Second question, I have a excel file that automatically loads the outlook "Toolbar" each time it is opened.
The file was made in 2010 and password protected and locked, sent to a worker who edited the appropriate fields and saved, and then they sent the file back to me (2003 Format). Now this file automatically loads the outlook toolbar. I am trying to trouble shoot so what would cause this behavior?
I am looking for a macro that will convert the active sheet in an Excel 2010 file to a PDF, attach the PDF to an Outlook 2010 email message, and fill in the subject line and recipient address which are the same each time.
i have the following code in my Excel worksheet. This code successfully send out email to our customers when if the criteria is true. I have tested this at home and it works perfectly as I use Outlook at home. However when I take this code to work I couldn't get this working as at work we use Outlook 365 and we use web Outlook, OWA.
Is there a setting I can specify to use OWA as I don't think I am allowed to install outlook at work.
I have some code to literally email a workbook to a specific user. But when the email is sending...i am getting the warning form Outlook whethere to send or not. If the user clicks No...then this opens up a can of worms when asking to debug. Is there a way i which i can amend the code to disable this warning and send regardless...without changing security settings in outlook???
I am trying to write a macro to compose an email in outlook without sending it. Ideally the macro would compose the email and the email would be left open for me to inspect before sending. Below are the details.
Column A contains the addresses Column B contains the CC addresses Cell C2 contains the message
I can change where the above info is located/arranged if need be.
My spreadsheet automatically generates the email addresses, which are dynamic. For control purposes my employer does not want me to have the email automatically sent, being the reason for me to want to inspect the email before sending it.
I find out a code to create a PDF (with opening the Save As dialog box) from an active worksheet, but I can't find out how to send this PDF by e-mail (Outlook). The code is working till the words 'Set OutApp'.
Just what I want is to send the active worksheet as PDF (as attachment) by email (Outlook). Here the present code.
Code: Sub SendPDF() ' ' SendPDF Macro ' Dim OutApp As Object Dim OutMail As Object Dim v As Variant v = Application.GetSaveAsFilename(Range("E2").Value, "PDF Files (*.pdf), *.pdf")
I have a problem concerning sending an active word document via mail. I have a worksheet with various information in it, that I am exporting to a word document. I then want to send the word document via email. I want to do this without saving the changes in the word document. I am working with excel 2010. I have posted some of my code below.
VB: Sub letter() Dim myWord As New Word.Application Dim adr As Variant
I get the following errormessage: "Compile error. Wrong number of arguments or invalid property assignment"
I am mostly using excel for simply data gathering and tracking. Require exact steps to be followed to accomplish the following:
- Sending automated reminder mails if current date is 15 days prior to "TO" Date - Sending automated reminder mails if current date is 10 days prior to "TO" Date - Sending automated reminder mails if current date is 05 days prior to "TO" Date - Sending automated reminder mails if current date is same as "TO" Date
Also, would be great if automated mails can be released if current date is 1 day past "TO" Date and showing "Overdue" in "Status" Column.
Below is sample data which gives an idea of the data kept and the requirement.
Exception ID Requester Email ID System Name
OS Detail- Windows 7 Microsoft Office - 2010 Microsoft Outlook- 2010
I am using Excel 2010. I have been given a task at work that can save my team a lot of time if I can solve the problem. Every month, we have a spreadsheet with about 5000 rows that we have to email. In each row, there is a range that we have to email to a specific email. For example, I would have to copy and paste Range A2-R2 in the body of the email, and then email it to whatever email is in cell S2. I would then continue this for the next 5000 lines, making it a possibility that i will be sending 5000 emails manually.
I have been trying to come up with a solution through VBA that would automatically send these emails. My goal is to automatically send the Range A2-R2 to outlook email, then cell S2 into the "To" email address box, and then automatically send it. So far, i have successfully been able to send one row, but cannot figure out how to loop it for the remainder of the rows.
A couple other key points are that I have column headings as well (Range A1-R1). If possible, I want to be able to include the column headings in the email body as well. Example - first email would be range A1-R2. second email would be range A1-R1 and A3-R3, and so forth. The body of the email would also contain a standard script, such as "Please review the information below."
The goal here is to save everyone from having to send 5000+ manual emails. This would be a big boost for my team.
I've been using a macro successfully for the last couple of years, but this morning when I went to use it, it decided to fail. I have a workbook which contains various spreadsheets. The macro that has failed performs the following tasks:
1. It copies a list of email addresss from an external workbook to a sheet in the current workbook (still works) 2. It copies the referral sheet I want to send to a new file, and saves it with an appropriate filename to an appropriate folder (still works) 3. The macro then creates an email with a standard subject line, attaches the new worksheet and emails it to each of the addresses as above (broken)
The error message is from Microsoft Visual Basic. "Run-time error '1004': Mail system failure. Check your mail installation."
I'm guessing there is a setting somewhere in Excel that has changed as part of an update.
I've been through a number of the options in the developer menu to remove any obvious restrictions (& reopened excel afterwards), but so far it hasn't resolved the problem.
For what it's worth, here is the macro code.
With Application .EnableEvents = False .ScreenUpdating = False End With Run "PullInSheet1" Dim oldbook As String
In case you're wondering about the pullinsheet code, I'll add it below - but I probably grabbed it from this forum a couple of years ago (like some of the above) & just made some changes.
Code: Sub PullInSheet1() Dim AreaAddress As String '''''' Sheet11.UsedRange.Clear Dim ClRange As String ClRange = "= 'L:ADMINEMPLOY SERVICES" _
There are a couple of things I've wanted to do to improve the macro, but I couldn't justify the need to spend time working it out (since writing spreadsheets isn't really my job). Since it's broken at the moment, I can...
1. I'd like to create a subject line that reflects the name of the person being referred. For some reason though, anything other than text in the cell reference caused an error for me. eg, I tried using concatenate to create my subject line, but it didn't work.
2. I'd like the copied sheet to contain all of the formatting of the original sheet. Presumably there is a paste option that will do this and I just picked the wrong one.
The mailsystem we use is Groupwise 8. I couldn't find any settings in that program that have been changed, or that I could change.
I should change the extension from xls to xlsx in the code since I'm using Excel 2010 (but changing it doesn't fix the problem).
We know that professional emails have a fixed format. I have a list of people with their names and emails and there are some people for which emails are missing. I am pasting my sample data below. But first let me explain the meaning of columns.
Column A: Means full name of the person for which we have email id Column B & C: just split of Available full name into first name and last name Column D: Email id of the person with full name in column A Column E: For the names in this column, we need to get email ids Column H: Sample result
Now basis on the Full Name(Column A) and Email Id(Column D) can we get the email id for person in Column E.
Sheet4 A B C D E F G H
1 Available Full Name Available FirstName Available LastName Email for available full name Actual Full name Actual firstname Actual lastname Sample result
My company recently upgraded everyone to Microsoft 2010 from 2007 version. I have no substantial VBA skill and left with a VBA code which is supposed to extract a list of outlook emails sitting in a shared mailbox into Excel.
I was using that VBA code in Outlook 2007 and it worked fine but shows the following error when run in Outlook 2010: 'Run-time error '-2147221233 (8004010f)': The attempted operation failed. An object could not be found. Here is part of the code:
It worked after one of the members suggested to "click on any line of this code and press F8 repeatedly until the yellow focus moves to the error line, don't press F8 anymore. Now in immediate window, copy paste each of below lines, press enter after each line. Let us know where the error occur." However, it stop working the next day.
creating a macro to send email from excel through Outlook basis of different conditions and with embedded text and subject.
There 2 workbooks attached with this post. The workbook named "Data" contains the data and the workbook named "Emails" contains the Dealer Names (in Column A), the Email ids of the contact person (Column B, C and D), the subject (in Column E) and mail content (in Column F).
I need a Macro which first split the data basis of "Dealer Name" Column F into multiple sheets from "Data" sheet. Now, each sheet will contain only the Individual dealer's data. The data whose ageing is 2 or more than 2 days (in Column H) is highlighted in yellow.
Now, I need to send a separate email to dealers with their data details from range A to F (including headers) as an embedded text with subject and mail content which is present in "Emails" workbook.
Now the twist is, if any dealer having the Aging value in Column H is 2 or more than 2 days (highlighted in yellow color) than the email should be sent in CC to Column D email ids but if there is no Aging more than 2 days than the email should be sent in CC to Column C email ids.
"To" email ids (in Column B), subject (in Column E) and mail body (in Column F) will remain same in both conditions. Column A is containing the Dealer Names through which macro will identify the email ids.
I am trying to make an inventory list with the expiry date of various chemicals. There is a user form which I have not coded yet. What I hope to do is have the macro send an email regarding which chemical is expiring within 90 days to a group of people.
I have a macro that will email a link of the worksheet.
the problem is I may have different email addresses to send it to. I want to be able to have an input box come up, and the person to enter in an email address, click ok and have the macro continue to email.
Sub Make_Outlook_Mail_With_File_Link() 'Working in Office 2000-2010 Dim OutApp As Object Dim OutMail As Object Dim StrBody As String If ActiveWorkbook.Path "" Then Set OutApp = CreateObject("Outlook.Application") Set OutMail = OutApp.CreateItem(0)
I've got a file that works fine on my computer. When I email it to anyone with 2010 and they open it from their email account (Outlook 2010), the file automatically opens up in 'Protected Mode'. If the user selects "Enable Editing" the user receives 'Run Time error 91: Object variable or with block variable not set'.
If the user closes out the vba error and saves the file to their computer and reopens the file, it works fine.
BTW, it is not a complex macro, it is error out at