Code: Sub Button1_Click() Dim cnt As ADODB.Connection Dim rst As ADODB.Recordset Dim stSQL As String Dim SNfound As String 'Your sqlserver 2008 connection string Const stADO As String = "Provider=SQLOLEDB.1;" & _ "" & _
but i dont see where to put in the Database object...
The Database it needs to connect to in SQl is called
The Server name is SQLSRV when you expand databases the database is called SWHSystem the Table is called dbo.Credential and from that i need to get SELECT All from the Name and CardNumber from dbo.Credential and put that in a New Sheet titled Personal
I have a large userform created and the save and close function works well, i have read multiple post about searching, updating - however i dont understand the coding (yet), really need a breakdown so i can adjust to suit. My whole file is to large to upload so attached is a small snippet.
What i am after exactly is:
Label 1 = unique number id (eg. Vehicle Rego...) - entered by user Search = to see if it is used already - if so populates the other cells with data from database, if not it can be used to start a new data entry on a new line in the database
Update = if a search was found can be ammended and "Updated" - overwriting the same line in the database
Save & New = Save new entry and clears for newer entry Close = closes userform
I have added in a combobox to see any different programming.
I my original file the database stretches from A1:FL1 - hence why only a small file can be attached.
Sheet1 contain daily input table which as follows:
Code: Namesalary Bonus Check XX1000 2 FN XY900 1 NA YY1100 2 FN ZY1500 3 DP ZZ1250 2 FN AA1050 2 NA AZ 950 1 FN
Sheet2 have table where all the information is saved. So we can say this is database of sheet1. Which store every day information of sheet 1.
Code: SALARY DATABASE Name SalaryBonus
What I want to do is that ---it copy all the data which fullfile condition FN and move to the Sheet 2 which is salary database. Two important things to check is that. IF name already exists in the sheet 2 then it replace old info with the new one. Second thing is to sort the whole table(Salary database-sheet 2) according to A-Z (Name column). I use office 2003. I hope I provide all the information.
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
I have a userform with a listbox that has 6 columns (D2:I50) which works great. In column J (J2:J50), I have data which needs wrapping so I plan on putting it in its own listbox. Is it possible to have another list box but one that operates as the first one is scrolled?
I have more than seven if statements but don't know how to connect them.
works =IF(C2=$A$2,13,IF(C2=$A$3,7,IF(C2=$A$4,5,0)))works IF(C2=$A$4,,IF(C2=$A$5,3,IF(C2=$A$6,3,IF(C2=$A$7,3,IF(C2=$A$8,3,IF(C2=$A$9,3,IF(C2=$A$10,3,IF(C2=$A$11,3,0))))))))can these be connected? they work for me separately but not all in one.
I've tried Named but that doesn't work because there are way too many things I need to do w/ it.
Im writing a program in VBA excel that displays two circles in excel spreadsheet, these two circles have been set X and Y Co - ordinates. Using the X and Y Co - ordinates i want to connect a line from shape 1 to shape 2
I was trying to move data from excel to access database in VBA. not sure if this has been done before.
What i have got at the moment is that there are some data in excel spreadsheet that i can dump into the table in the access database. My problem here is i need to be able to open the database first, set up connection, and then perform SQL insert query command.
So in the worksheet, i have a button with the following codes in it so far i could just manage to open the database as follows
how to do this with Java but not VBA, I have the capability of understanding it I just need to know where to look because I can't seem to find any solid information on the net from my searches. Does anyone have any websites, other threads or anything they could direct me to for this kind of thing.
I was contemplating putting this in the Access thread but I want to connect to Access through Excel so I think it fits both.
My plan is to use a macro to send specific cells to five seperate tables in an Access database using VBA and SQL.
I've created a button on a sheet that triggers the creation of a checkbox on the ActiveCell. I also want the checkbox to link to the activecell in order to use the TRUE or FALSE values in an AutoFilter. I used the following code, but the checkbox doesn't link to the ActiveCell. I thought it might be because the LinkedCell = "TEXT" whereas a Range isn't text?
Sub AddHoekCheckBox() Dim MyRange As Range Dim CBLeft As String, CBTop As String, ctlName As String Dim cbObj As OLEObject Dim MyDoc As Worksheet Set MyRange = ActiveCell CBLeft = CallByName(MyRange, "left", VbGet) + 0.25 * CallByName(MyRange, "Width", VbGet) CBTop = CallByName(MyRange, "Top", VbGet)...........................
I'm trying to get my macro to connect to Infomaker and run a query. I have successfully done this in the past by using the record macro function. But, when I try to record the macro and paste the query syntax from Infomaker into the commandtext box of the connection, I get the "too many line continuations" error.
I've been looking at ways to write the code rather than record, but the syntax for the Infomaker queries doesn't seem to mesh well.
The syntax of the query in Infomaker is (copy/pasted, all "'s are necessary):
I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest() Dim n Dim V Range("A1").Select V = ActiveCell.Value
I have two columns. One column has UPCs - some of which are duplicates. The second column just has number values. I'm trying to add the sum of all of the numbers in column two which are attached to their respective UPC. For example,
COL A///// Col B 11111111111///// 10 00000000000///// 15 11111111111///// 10 11111111111///// 4 00000000000///// 2
So, I need a third and fourth column to give me the total value for a single SKU(col A) of all the values in col B. In this example the Third column would contain the SKU, and the fourth column would contain the sum of all values in column B that are associated with the single SKU in column three. The third and fourth column would look like this:
COL C///// COL D 11111111111///// 24 00000000000///// 17
My spreadsheet calculates the date on a daily basis.
I would like to create a code in my spreadsheet which uses the year and month in question.
First, 2006 is is designated as a "3" 2007 "4" 2008 "5" 2009 "6" etc
Don't worry about anything prior to 2006.
Next, the months are represented by single digits. So, January = 1, February = 2, March = 3, April =4, etc. September is 9, and October = 10 but all the numbers over 9 have to be reduced to a single digit, so October = 1+0=1, November =1+1= 2, December =1+2= 3.
Now, the formula for the Month is:
Year + current Month
So, May 2007 = 4 + 5 = 9 June 2007 = 4 + 6 = 10 = 1 July 2007 = 4 + 7 = 11 = 2, January 2008 = 5 + 1 = 6, etc
I have made this vba to go out and look at 2 different locations which contain simular folder names.
The script then writes the folder names in Column A, followed by the Size of both the folders from the 2 locations. The script is comparing the second location folder name to what the first process put in Column A so the folder names will be aligned with the file sizes. It is also converting the file sizes from bytes to the most appropriate one.
The problem I am having here, is once I put the second part in for the second folder, the script is either taking forver (More than an hour) or is freezing. So I am not sure if I put it in a loop somewhere or what exactly is happening. I am just wondering if I can get some help troubleshooting and optimizing this code....
How it is possible to lock the VBA coding and Modules? I mean when Some one want to view VBA coding the Password window should not appear, istead of that a message box appears with message something like "Not viewable"
keep getting "The formula you typed contains an error".
To calculate a person (or anything else) age you basically subtract his date of birth from today's date. However which date functions to use depends on the amount of precision and the output format you want.
3. If we want his age in years and months, then we can use a formula like this one: =INT((TODAY()-A1)/365.25) & ” years and ” & INT(MOD((TODAY()-A1)/365.25;1)*12) & ” months”
The output of this formula will be as follows: 40 years and 2 months.
I change A1 to G3 because that is where I the birth date.