Hierarchy Chart - Connect 1st Tier To 3rd Tier
Jun 21, 2014I have a ppt chart with several tiers as you can see in attachment. Can I connect 11 to 12? Tier 1 to tier 3?
View 1 Replies
ADVERTISEMENT
Two Tier Sorting In Protected Sheet
May 24, 2014We are needing to do a two tier sort in a protected spreadsheet. Is this possible?
The two columns that need to be sorted have protected cells between them.
If there a way to ad a button that will automatically do this sort for the user... as in can I add a button some how in one of the empty cells that will do it?
Here is the sheet. [URL] ..........
Looks like I need to sort column A thru Z, except W.
Return “Tier” Whatever Match The Record
Feb 23, 2007I have a sell price in J2 and I want to find out if it matches a sell price in any of the cells form K,L,M,N,O or P and if it dose return the corresponding column header
e.g. in J2 I have 2.40 and it matches M2 therefore I want it to return the Header in M1 which is SSL2.
If it doesn’t match anything I want it to return “Tier”
Cascading Two Tier Dropdowns In Form Control
Jun 4, 2013I am having some trouble with cascading two tier drop down. I cannot seem to find out how to do it. I am trying to create a two tier cascading drop down in form control. I want the first drop down to be Products we have and the second one to be customers. I also want to be able to create a bar chart from these drop downs where after we choose our customer by product, it shows the revenue we have recieved from the customer by months. Is there a way to do this? I figured out how to do this with just one combo box, but I am unable to do a cascading one.
View 5 Replies View RelatedPivot Table - Return Upper Tier Row Label
Dec 29, 2012 I have a pivot table that looks like this:
Note my current selection ("Marysville-Service Center"). Using VBA, how would I go about retrieving the upper level row label - "BLACK" in this case? How would I get the level above that ("16GB"), and etc ("APPLE IPAD MINI7" then "2.Recommended"). How can I tell how many rows are above the current selection...say if I want to retrieve the highest tier?
Hyperlinking Texts In Hierarchy Chart?
Jul 2, 2013I have created a hierarchy chart using smartart. Is there a way to hyperlink the texts in each box to other sheets in the workbook?
[URL]
Get Hierarchy Chart Automatically With Given Data Through Macros
May 25, 2014I have been trying to think of a way to get a hierarchy chart automatically with given data through macros
In the attached excel sheet
Org. Charts (hierarchy) question.xlsm
Would it be possible to get the chart to do by itself if say I were to add items or remove items? Is there any way to do it for data automatically?
I extract the data from primavera as attached and I want to make the chart in excel automatically.
Creating A Hierarchy Of Non Numerical Data ?
Jan 28, 2009I need to create a table of non numerical data that I can refer to in a formula, which will compare two pieces of data (both also inside this table), and based upon which is "higher up in the hierarchy" - the cell will display a certain result.
Basically it will be an IF function using non numerical data that has a numerical value / "rank" attached.
Specifically - I need to allocate values to this list in cells A1:A5...
EUR
GBP
AUD
NZD
USD
....where EUR is highest ranked and USD lowest.
Then in column B and C will be listed each of these values but in various combinations. In column D I will build simple IF functions to show the highest ranked in each combination. eg B1=EUR C1=GBP D1=IF(B1>C1,B1,C1)
Create Hierarchy Of Data Types
Apr 28, 2009My question is about creating a hierarchy of Data Types.
I need to code 3 Data Types:
1.) MealPlan
2.) Meal
3.) MealItem
MealPlan represents a daily meal plan. It should have a certain number of meals. An example of MealPlan would be "Healthy" and have a total of 3 meals. Meal represents a single meal. It should have a certain number of meal items. An example of Meal would be "Meal 1" and have a total of 3 meal items. MealItem represents a single meal item. It should have a certain number of protein calories, fat calories, carb calories. An example of MealItem would be "Broccoli" and have protein calories of .2, carb calories of .8, fat calories of .1.
By using Data Types, I hope to create meal plans, which are made up of meals, which are made of meal items. The following code creates a Data Type hierarchy for two Data Types. I've examined it closely but i'm still having a hard time recreating it for my needs as stated above.
Creating Multiple Drop Box In Hierarchy
Apr 30, 2009I did all the search for multiple drop box or list box that can connect to other list boxes but no luck.
It's the same as when you surf with Internet Explorer, you can click "Views" in menu bar, list box appear and then choose "Encoding", another drop box appear, then when you choose "More", then another box appear.
Is it possible to have this sort of hierarchy list box in excel where drop box connect to another drop box?
Roll Up Data Based On Hierarchy
Dec 4, 2011I have case where i need to roll up data based on the hierarchy. I have hierarchy of 4 level as follow:
Level1 Level2 Level3 Level4 Country Region1 Dept1
Unit 1 Country Region1 Dept1
Unit 2 Country Region1 Dept1
Unit 3 Country Region1 Dept1
Unit 4 Country Region1 Dept1
[Code] ........
The data in all sheets is identical...so I created a macro to create template based on the rage. The problem is that the template is good for level 4 but not good for other level.
Rearrange Data In Hierarchy To Table
Jun 6, 2007How do I use VBA to rearrange the data from the hierarchy format of Table 1 into the flat format of Table 2. See attached file >Data_Belinda_June-5-07.xls
Table 1: Each record has information arranged in a hierarchy format.
Level 1 information is indented by one space on one line; Level 2 information is indented by 2 spaces on the next line, etc.
Table 2: Data from Table 1 have been rearranged into 7 columns. Another column has been added to create a field for the Reference ID.
Reference ID: Two types: i) Created by prefixing with the letters BI , adding the first four letters from column 4 and the first four letters from column 5; ii) As in (i) with the addition of the entire word from column 6.
The report I have may have more than one hundred records and there may be more than ten people within each section.
Connect 2 Listboxes
Feb 28, 2014I have a userform with a listbox that has 6 columns (D2:I50) which works great. In column J (J2:J50), I have data which needs wrapping so I plan on putting it in its own listbox. Is it possible to have another list box but one that operates as the first one is scrolled?
View 2 Replies View RelatedConnect Nested Ifs
Jul 1, 2008I have more than seven if statements but don't know how to connect them.
works
=IF(C2=$A$2,13,IF(C2=$A$3,7,IF(C2=$A$4,5,0)))works
IF(C2=$A$4,,IF(C2=$A$5,3,IF(C2=$A$6,3,IF(C2=$A$7,3,IF(C2=$A$8,3,IF(C2=$A$9,3,IF(C2=$A$10,3,IF(C2=$A$11,3,0))))))))can these be connected? they work for me separately but not all in one.
I've tried Named but that doesn't work because there are way too many things I need to do w/ it.
Connect Two Circles
Feb 28, 2008Im writing a program in VBA excel that displays two circles in excel spreadsheet, these two circles have been set X and Y Co - ordinates. Using the X and Y Co - ordinates i want to connect a line from shape 1 to shape 2
ActiveSheet.Shapes.AddLine(495.75, 234#, 682.5, 234#).Select
Multiple Criteria On Index / Match With Hierarchy
Dec 29, 2011The below formula was provided by PGC, and works great:
=INDEX($E$15:$E$18,MAX(IF($A$2:$A$8=A15,MATCH($E$2:$E$8,$E$15:$E$18,0))))
In post:
Complex Array(?) Search
Now, I would like to add the ability to perform this same action/concept, but using two different criteria.
So I want to keep the hierarchical listing of importance, but lookup/match within using more than one criteria.
Example:
I have an order of superseding to apply to results of a search for Fruit.
Great
Good
Fair
Poor
(so Good supersedes, Great; Fair supersedes, Good; etc.)
Column A____Column B____Column E
Apple_______Red_________Fair
Apple_______Red_________Poor
Apple_______Green_______Great
Pear________Red_________Great
Pear________Yellow_______Great
Pear________Red_________Good
Pear________Red_________Fair
I want my verification to return all the worst Red fruit:
For Apple Red: Poor
For Pear Red: Fair
Change Vertical Rolling Hierarchy To Horizontal
Sep 19, 2007The accounts listed on this report change on a monthly basis. I am attempting to create a macro or write a formula that can but used each month to fill in this list automatically. On Sheet 1 is a short example of what the report looks like when exported into excel. The numbers on the left are the numerical hierarchy. The long set of numbers are the account numbers and the others are the categories that each are located under.
Sheet 2 is what I need the end result to look like. One of the problems I am running into is how to handle the fact that the hierarchy re-uses numbers. The hierarchy always runs vertical, therefore "5" always falls under the "4" that is directly above but when there is another "4" it should be ignored and continue on up the chart until it finds the first "3" and place that in the cell to the right then find the first "2" and so on.
Create Parent Child Relationship From Hierarchy
Feb 7, 2008I have an excel file (see sample attached) with a hierarchy with parents and children spread across different columns and rows. However, I am trying to condense it into one column with parents and one column with children. The only way I've been able to do this is by copying and pasting parents onto children rows, which is both a manual and time-consuming process (when you have a lot of rows). I feel like there must be a way to use VBA or a formula or something to get it to work. I have attached a sample, so you can see what I am trying to do (current data and desired data).
View 6 Replies View RelatedConnect To Access Database
Nov 6, 2007I was trying to move data from excel to access database in VBA. not sure if this has been done before.
What i have got at the moment is that there are some data in excel spreadsheet that i can dump into the table in the access database. My problem here is i need to be able to open the database first, set up connection, and then perform SQL insert query command.
So in the worksheet, i have a button with the following codes in it
so far i could just manage to open the database as follows
Connect Direct To The Newsgroup
Nov 25, 2005Is there a way to connect direct to the newsgroup below via OE6:
microsoft.public.excel.worksheetfunctions
It doesn't appear in the newsgroups' list ..
--
Rgds
Max
xl 97
---
Singapore, GMT+8
xdemechanik
http://savefile.com/projects/236895
--
Connect To Access Using ODBC
Apr 17, 2009how to do this with Java but not VBA, I have the capability of understanding it I just need to know where to look because I can't seem to find any solid information on the net from my searches. Does anyone have any websites, other threads or anything they could direct me to for this kind of thing.
I was contemplating putting this in the Access thread but I want to connect to Access through Excel so I think it fits both.
My plan is to use a macro to send specific cells to five seperate tables in an Access database using VBA and SQL.
Checkbox Won't Connect To Linkedcell
Apr 4, 2007I've created a button on a sheet that triggers the creation of a checkbox on the ActiveCell. I also want the checkbox to link to the activecell in order to use the TRUE or FALSE values in an AutoFilter. I used the following code, but the checkbox doesn't link to the ActiveCell. I thought it might be because the LinkedCell = "TEXT" whereas a Range isn't text?
Sub AddHoekCheckBox()
Dim MyRange As Range
Dim CBLeft As String, CBTop As String, ctlName As String
Dim cbObj As OLEObject
Dim MyDoc As Worksheet
Set MyRange = ActiveCell
CBLeft = CallByName(MyRange, "left", VbGet) + 0.25 * CallByName(MyRange, "Width", VbGet)
CBTop = CallByName(MyRange, "Top", VbGet)...........................
Slicer Hierarchy Value Sorting - Selected Values Won't Sort To Top
Nov 25, 2013I have two slicers that are in a hierarchy. These are attached to a Pivot table whose data source is an OLAP cube. Every Partner Parent is part of a Partner Group:
Partner Parents Slicers.png
My problem is that when I click SI Alliance in Partner Group, the Partner Parent slicer does not re-sort in any way. The corresponding selected Partner Parents are scattered throughout the alphabetical list. However, in a different document, I have slicers in a similar situation, except their Pivot table’s data source is a SQL Server database. When I click on a member of the higher up group (Accenture Global Client) the lower level group (Microsoft Account Name) sorts to show only the selected values at the top of the list:
This is with all selected - Accenture Slicers All.png
This is with just one Accenture Global Client selected. Note how the selected Microsoft Account Names have moved to the top of the list - Accenture Slicers Selected.png
How I can configure my Partner Parent/Partner Group slicers to behave like these Accenture/Microsoft slicers? Is there something that I can change in Excel or in the OLAP cube to make this happen? I have already tried right-clicking the slicer and going to Slicer Settings. The settings on the Parent/Partner Group slicers mimic those of the Accenture/Microsoft slicers exactly.
Got Stuck In Middle To Display Hierarchy Of Employee In Organization
Aug 5, 2014I am supposed assign macro to track all employees hierarchy in an organisation.
In Sheet1 I have Employee ID's in D Column and Supervisor ID's in N Column.
And In Sheet2 I assigned macro...
What exactly I need is when I give number and click the button I need all the employee id's in his hierarchy
Concept:
The number which you give should search in N Column and Display D Column Values...and those D column values should search in N column and display D column values....so on.....
So far, it is showing 1 level hierarchy...but I need till end...
How To Connect To Unix OS On Solaris Server
May 28, 2012I am trying to get some data on a excel. This data is available on a unix OS solaris server.
The data is available in tabular format on the txt file in the server and i need to populate this data on my excel sheet.
How to connect to unix from excel and how to get the data.
Macro To Connect To Infomaker And Run Query
Apr 17, 2014I'm trying to get my macro to connect to Infomaker and run a query. I have successfully done this in the past by using the record macro function. But, when I try to record the macro and paste the query syntax from Infomaker into the commandtext box of the connection, I get the "too many line continuations" error.
I've been looking at ways to write the code rather than record, but the syntax for the Infomaker queries doesn't seem to mesh well.
The syntax of the query in Infomaker is (copy/pasted, all "'s are necessary):
Code:
SELECT "COMPANY"."CO_NAME",
"COMPANY"."FLAG",
"CO_REF"."CO_VALUE",
"ITEM"."ISSUE ",
"REFERENCE"." ID_VALUE",
MIN(CODE.PROD_CODE)
FROM "COMPANY",
[Code] ........
Use SQL To Connect An Excel Document To Database
Feb 26, 2007Some time ago, a friend of mine told me he didn't use any Pivot Tables at all, due to the imense space they require.
Instead, he made connections between Forms in Excel and the Databases using SQL.
Do you know of any Internet site where I can start to learn something about this?
Connect Live Data In Sheet
Dec 30, 2009How To Connect Live Data in an Excel Sheet?
I want to track changes in some Stocks, I have made a sample file in Excel and would like to make it Live by Connecting it to a website..
However, I do not know how to go about the same?Can some please provide some examples as well as a File if possible explaining how it was done..
VBA Code To Connect To BMC Remedy And Fetch Report?
May 9, 2013I have a requirement to pull report from BMC remedy using VBA. I am sure that many people would have achieved this. .
View 1 Replies View RelatedExcel 2010 :: How To Connect To MS SQL 2008R2 Using VBA Coding
Feb 12, 2013I have 2010 Excel and MS SQL 2008R2.
I'd like to import data from my stored procedure from MS SQL into a cell in Excel....
No pivot.
I looked for a standard coding all over the place - no success.