Excel 2010 :: Overflow Error 6 - When All Variables Defined As Integers
Jul 17, 2012
I have tracked down an overflow Error 6 to the following line:
dMax = Int(s * DPoints / SPoints)
Where all variables are defined as Integers. The error goes away when I define s as Long, but I don't understand why this should be required since none of the individual variables ever exceed the scope of an Integer (-32768 to 32767).
Strangely, I get the same overflow problem when I type either of the following calculations in the immediate window:
? Int(328 * 100 / 1000)
? 328 * 100 / 1000
? 328 * 100
Note that no variables are defined, so why the overflow problem? Surely Excel/VBA should be able to work with this very basic calculation without any problem, by assigning the appropriate dimension, no?
Is this a known problem with Excel/VBA?
I am using Windows 7, with Excel 2010 (updated from 2009).
View 9 Replies
ADVERTISEMENT
Mar 16, 2007
According to Microsoft in Visual Basic an Integer can contain -2,147,483,648 to 2,147,483,647.
Yet when I store 5,000,000 to an integer I get an overflow error.
View 9 Replies
View Related
Jul 29, 2014
I am using Microsoft Excel 2010 and Microsoft VBA 7.0 on my system. I would like to eventually create a PowerPoint and insert charts generated in the Excel workbook. In the meantime, I cannot get the basic PowerPoint created.
The line in red is highlighted blue when the compile error "User-defined type not defined" message box appears.
Public Sub TryAgain() Dim myPowerPoint As PowerPoint.Application
'
' do nothing for now
'End Sub
I have set the references such that Microsoft Project 14.0 Object Library is indeed checked. The Excel file only contains this code in a module. All sheets are blank. Nothing else is written yet.
View 1 Replies
View Related
Dec 28, 2012
In my worksheet, I know the last line of my report AND I know how many "reporting segments" (all equidistant and identical) there are in the report based on the last row using the below (which I tested in several reports in messages):
VB:
Dim vListEnd As Variant
Dim vTaskCount As Double
vListEnd = ActiveSheet.Range("A1").Offset(Sheet1.Rows.Count - 1, 0).End(xlUp).Row
vTaskCount = ((vListEnd - 5) / 22)
My "reporting segments" are ALWAYS 22 rows each and the first one always starts in row 5. Example: A document where the last row (containing an End of Report special character) is 247 would have 11 reporting segments.
Within each reporting segment, there are two different formulas needed.
For the first reporting segment located in rows A5 thru J27:
I need FORMULA1 in all cells of the range (D5:D15 dragged out to H5:H10(not 15) and D18) and FORMULA2 in cells (F20:F22,J20:J22).
Then I need to repeat that vTaskCount number of times (number of segments) and at intervals of 22 (segment repeater offset). Some reports may have 2 segments, some might have 50, but the structure is always identical.
My formulas are all pretty simple if it makes a difference (originally using FormulaR1C1 = "=RC[-1]+RC[-3]" --- but because I now know solid cell locations I suppose I don't need to make them relative, too.)
View 2 Replies
View Related
May 5, 2013
Base 64 Encoding.
Dim objXML As MSXML2.DOMDocument
Dim objNode As MSXML2.IXMLDOMElement
Are causing the User Defined error, but the same workbook is OK in XP and Win 7.
VB6: Free, Easy and Quick Base64 Encoding and Decoding in Visual Basic [a NonHostile article]
Says you need a reference to Microsoft XML, v2.6 (or later) and the Win8/2010 workbook does have one for Microsoft XML, v6.0
View 1 Replies
View Related
Oct 9, 2012
Trying to convert an Excel 2003 macro to work in Excel 2007.
The problem line is
Dim MyDataObject As DataObject
I suspect the problem is a Missing Reference, but I cannot figure out which one. I have the same ones (in 2007) as 2003 except for one which is not showing
Microsoft Forms 2.0 Object Library
Is this the one it needs? It is called something else in 2007?
The ones I do have ticked are
Visual Basic For Applications
Microsoft Excel 12.0 Object Library
OLE Automation
Microsoft Office 12.0 Object Library
Microsoft ADO Ext. 2.8 for DDL and Security
Microsoft DAO 3.6 Object Library
Microsoft ActiveX Data Objects 2.8 Library
Microsoft Scripting Runtime
Microsoft XML v2.6
View 8 Replies
View Related
Feb 9, 2009
I've a big problem getting the Constraints in excel solver to use variables.
It seems that the only accepted variable type in the contraints are STRING variables. THe following simple example works AS LONG AS the variable apa is a STRING value and as long as it doesn't contain decimals....
So the question is. How to use varialbes in the FormulaText argement other than string values as integers?
View 14 Replies
View Related
Mar 5, 2013
I have a relatively complex report that I work with and a worksheet is no longer required. I have deleted the worksheet and reference to it hwoever when running the macro to pull all the data, it gets to the summary of all the data and i get the Run Time Error 1004 Application-defined or object-defined error pop up. ON reviewing it, it is on this line ActiveCell.Offset(0, 0).Range("a1:a" & Range_Height).Select of the below code...
VB:
Sub GetRangeName()
Sheets("TOTAL").Select
[Code].....
use code tags around code. Posting code without them makes your code hard to read and difficult to be copied for testing. Highlight your code and click the # at the top of your post window.
View 1 Replies
View Related
Apr 26, 2009
I have a simple function below to put in different forumlas in different cells to get stock quotes. When I run this I get runtime error 1004 application-defined or object-defined error. The first formula goes through but vba chokes on the next formula: ActiveCell.Offset(I - 1, 4).Formula = username
View 10 Replies
View Related
Aug 12, 2009
Run-time error '1004' Application-defined or object-defined error. I am trying to use this
View 2 Replies
View Related
Oct 4, 2009
I was trying to use the below code
View 4 Replies
View Related
Dec 4, 2009
I keep getting a Run Time Error 1004 (Application Defined or Object Defined Error) when my sub reaches this line:
ActiveCell.Formula = "=SUM(D222,D224,D226,D227,D229,...)"
In the actual line of code the "..." above is another 20-30 or so cells in column "D". Probably no more than 150-170 characters in the line.
If I remove half of the cell range names it works, but I need all of the cell ranges for the equation.
View 9 Replies
View Related
Jul 24, 2007
I am trying to copy the info from one workbook to another workbook.
I keep getting the above referenced error...
Private Sub CommandButton1_Click()
Dim filepath As String
filepath = Range("A100")
MsgBox ("File Appended")
Workbooks.Open (filepath)
Windows("CorrespondenceMaster.xls").Activate
Sheets("Sheet2").Select
Range("DesNo", "LocationPath").Select
Selection.Copy
Windows(filepath).Activate
Range("A2").Select
ActiveSheet.Paste
End Sub
View 3 Replies
View Related
Aug 9, 2009
I used to have a ton of experience with Java and C# but now my job calls for VB scripts in excel. Probably an assignment error or logic error but here's the ....
i m doing is i have two workbooks "New Dashboard" and "Book1". I search column A in Book1 for HELLO, and then i use the row it was found in to grab a value "HrsVal". I take that value and i put it "New Dashboard". I then do the same for every sheet. It seems to fail in my second loop in the 2nd sheet. Error says "Overflow".
View 4 Replies
View Related
Jan 12, 2010
I haven't figured out who hates who more, me hating VBA or VBA hating me.. we just do not get along very well.
Anyways, I am having difficult understanding why I am getting the following error:
Error 1004: application defined or object-defined error.
I am using code that I just copied over from a worksheet where it was working fine. This is part of it.
View 6 Replies
View Related
Dec 1, 2003
I have a userform setup to enter data into a worksheet
Whee the user hits the button to add the data, I get the error 1004
Application defined or Object defined error
It is on the line Set LastRow
Private Sub CommandButton1_Click()
Dim LastRow As Object
Set LastRow = Sheet1.Range("a65536").End(x1Up)
....end sub
Now I am sure this has always worked in the past, so Is it me or am I really missing a plank or two?
View 9 Replies
View Related
Feb 20, 2013
I'm using Excel 2010. I have three columns. Column A contains the date, Column B contains the time, and Column C contains the date and time. Column C is the result of a formula, which adds Columns A and B (ie. =A2+B2). So I have the following...
Date
Time
Date and Time
1/15/13
9:00:00 AM
1/15/13 9:00:00 AM
1/15/13
9:00:05 AM
1/15/13 9:00:05 AM
[Code] ....
I'm using a defined name to store a date and time, which I'm going to use as a lookup value in a Match function. I've defined MyVal as follows...
1/15/13 9:00:20 AM
Excel automatically converts this to the following decimal number...
=41289.3752314815
When I first run either of the following two macros, they correctly return 5...
Code:
Sub test1()
Dim x As Double
x = [MyVal]
Debug.Print Application.Match(x, Range("C2:C10"), 0)
End Sub
Sub test2()
Dim x As Date
x = [MyVal]
Debug.Print Application.Match(CDbl(x), Range("C2:C10"), 0)
End Sub
However, when I save and close the workbook, and then re-open it, these macros both return an error. Is this some sort of bug in Excel?
View 9 Replies
View Related
Dec 9, 2013
Excel 2010 Windows 7
There is a lot going on, including a check box, which I dont have much experience with and data on two different sheets. I need to sumif the box is checked (true cell) and the item matches the item on another sheet then I need to sum the qty in the adjacent column.
Inventory sheet:
I will have a similar formula in both C and D, but this will be for what I need in D, and I should be able to figure C out from that. What I have to get my starting number is "=SUM('Proc-Pack SUMMARY'!B16-'Proc-Pack SUMMARY'!C16)". Now I need to subtract what is sold from that number to give me a current on hand number.
Type
date
qty packaged
qty bulk
Inventory sold sheet:
The type column is a drop down box with that matches the type column on the inv sheet. The "cyl" and "lbs" columns have check boxes in them. So if C (cyl) is checked and A matches A on the inventory sheet I need to subtract D.
Type
Cyl
Lbs
Qty
Ive tried various variations of this "=SUM('Proc-Pack SUMMARY'!B16-'Proc-Pack SUMMARY'!C16)-sumif(Sold!F:F,"true",Sold!E:E=Inventory!A:A,Sold!H)"
Also is it possible to link so you can only one of the two check boxes in a row? I know the option button does this, but I didnt think that would work with the formula.
View 7 Replies
View Related
May 13, 2009
I am having difficulty getting a form to work the way that I would like it to work. I have a form that is used to display questions that my students will be answering. The form also is used to put the answers into a worksheet. I have 2 sheets. Sheet2 has the questions, student answers, and correct answers. Sheet1 is used to indicate correct answers and to keep track of percentage correct. I am fairly new to VB. I have 2 pieces of code that I am going to post. The first one works and the second one doesn't.
This is in the "This Workbook" section and it works.
Option Explicit
Public intNoQ As Integer
Public strNoQ As String
Public NumberofQuestions As Integer
Dim StudentName As String
Dim InputBoxAnswer As String
Public Sub Workbook_Open()
Application.Visible = False 'Hide Excel
Load Questions
Load NumberCorrect
NumberofQuestions = Worksheets("Sheet1").Range("K3").Value
For intNoQ = 1 To NumberofQuestions
strNoQ = VBA.CStr(intNoQ)
If intNoQ = 1 Then
Questions.Controls("QuestionNumberBox").Value = "Question#" & strNoQ
Questions.Controls("QuestionBox").Value = Worksheets("Sheet2").Range("B1").Value
End If
Questions.Controls("CorrectBox" & strNoQ).Visible = True
Questions.Controls("CorrectLabel" & strNoQ).Visible = True
Next intNoQ...............
View 9 Replies
View Related
Jul 17, 2012
I have some VBA that dumps various sheets data into an SQL Database.
Part of that requires me to sanitize all of the fields before they make it to the DB, (at least to prevent the code from breaking itself w/ errant ' characters.
right now my code is as follows
Code:
If InStr(aa, "'") > 0 Then
aa = Replace(aa, "'", "''")
End If
If InStr(bb, "'") > 0 Then
bb = Replace(bb, "'", "''")
[Code] ......
I was hoping to condense it to something like the following, however it is not working how I hoped / want it to. .. I had found somewhere out there that this Eval() function possibly could be used to 'reference' dynamic variables, however it does not appear to work at all anymore, and even then it may only have worked to 'read' and not 'write' to the variable. (Excel 2010, on Windows 7 64-bit).
Code:
itemsToSanitize = "aa,bb,cc,dd,ee,ff,gg,hh,ii,jj,kk,ll,mm,nn,oo,pp,qq,rr,ss,tt,uu,vv,ww,xx,yy,zz,aaa,bbb,ccc,ddd,eee,fff,ggg,hhh"
ITSArray = Split(itemsToSanitize, ",")
For Each thing In ITSArray
If InStr(Eval(thing), "'") > 0 Then
Eval(thing) = Replace(Eval(thing), "'", "''")
End If
Next thing
View 7 Replies
View Related
Dec 23, 2009
when I run the macro, I receive an error: "Run-Time Error '1004': Application-Defined or Object-Defined Error" See attached macro. If I click "Debug", the line "With r.Resize(,1)....... becomes highlighted in yellow.
View 9 Replies
View Related
Sep 18, 2009
In one worksheet i have created the following code, which adds date to
specific column when data is entered in colum A.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
If Target.Column = 1 Then
Target.Offset(0, 10).Value = Now()
End If
End Sub
The problem is that when trying to delete a whole row, error message pops-up.
Run-time error '1004' Application-defined or object -defined error. When click "End" actually everthing is ok, the row has been deleted, but was just wondering what is causing that error.
View 2 Replies
View Related
Jan 6, 2010
This error is telling me "application defined or object defined error" and i am unsure how to fix it. Basically i have a ton of files within a folder that i am trying to do some reformatting to. I would like to save the new files to a new folder and keep the originals where they are.
View 5 Replies
View Related
Apr 7, 2008
I have a sub that takes the value in 2 textboxes and creates a profit margin in another textbox. It's a simple sub but it keeps returning the overflow error, and I can't figure out how to fix it.
Here is what the sub says that is causing the overflow:
Sub FindNetProfitMargin()
UserForm2.tbProfitNetProfitMargin.Value = Val(Mid(UserForm2.tbTotalContractPrice2.Value, 2)) / Val(Mid(UserForm2.tbProfitNetProfit.Value, 2))
End Sub
View 9 Replies
View Related
Aug 13, 2008
I declare a bunch of variables and arrays, mostly longs and doubles, then run a DLL. After that, I redim one of my arrays (2D) to the right size and try to fill in some values. The array is a double and the values are less than one million. On the first element the code breaks and throws an overflow error.
If I choose "Debug", I can then click continue and it finishes just fine as if there was no error. I can see in the debugger that the array is sized properly, has the correct type, etc. I have no idea what could be wrong here. Could it be a memory problem?
View 10 Replies
View Related
Jan 4, 2007
Range("J" & (Count)) = (Range("E" & (Count)) / Range("H" & (Count))) - 1
View 9 Replies
View Related
Mar 6, 2007
I'm experiencing a overflow error in Excel VBA. The operation that causes this problem is (I have very long for loop, but that is correct only this following sentence is causing the problem):
Sheet2. Cells(2, m+4) = Sheet2.Cells(23, m+4)/Sheet2.Cells(25, m+4)
NB: No zero values are involved in this calculation and the problem is caused by long decimal result! I dont know how to get rid of it!!
View 2 Replies
View Related
Jul 9, 2007
whenever i run my code below that states "Runtime error '6' Overflow". At debug, the affected statement is " Cells(x + 1, 12) = Cells(x + 1, 11) / Cells(x + 1, 8) ". Can anybody help me with this error ?
Sub QQQQ()
Dim v As Long, x As Integer, k As Variant
Dim arr(0 To 100, 0 To 100) As Variant
For Each k In check_case_arr1
Cells(x + 1, 1) = arr(k, 1)
Cells(x + 1, 2) = arr(k, 2)
Cells(x + 1, 3) = arr(k, 3)
Cells(x + 1, 4) = arr(k, 4)
Cells(x + 1, 5) = arr(k, 5)
Cells(x + 1, 6) = arr(k, 6)
Cells(x + 1, 7) = arr(k, 7)
Cells(x + 1, 8) = arr(k, 8)
Cells(x + 1, 9) = arr(k, 9)
Cells(x + 1, 10) = arr(k, 10)
Cells(x + 1, 11) = arr(k, 11)
Cells(x + 1, 12) = Cells(x + 1, 11) / Cells(x + 1, 8)
Next
End Sub
View 9 Replies
View Related
Jan 22, 2014
Excel 2010
I am trying to set public variables from an event handling procedure based in a worksheet so I can use that variable in a userform. Nothing I have tried works no matter where I declare the variable. I am using a msgbox to display the variable (a range) but it shows as blank regardless of whether I place the variable in a module, this workbook object or in the sheet object where the event code is placed.
I am sure there is a simple way to transfer variables from the sheet's code (where it must remain as the variable depends on the target cell's position that triggers the event).
View 2 Replies
View Related
Oct 19, 2007
I have read the other posts on here and swapped, Dim timeinc As Interger to Dim timeinc As Long and Dim timeinc As Double but neither worked. They both make the calculation 0 and I can not figure out why. This macro has worked before and is failing only on this new dataset which I have attached as well.
I am solving this problem on a PC and the macro was built for a Mac but I do not think that should change much as when I run it on a Mac it fails the same
View 11 Replies
View Related
