Export File Names To Excel?
Nov 15, 2010i would like to export the sub-directory file names to excel.
View 5 Replies
ADVERTISEMENT
Export .bin File Format In Excel
May 5, 2009How do I export a file in .bin format
View 9 Replies View RelatedExcel 2007 :: How To Apply Filters And Export A New XML File
Apr 5, 2012I have an XLS file that gets data from an imported XML file. I need to apply some filters and then export it in a new XML file. I'm trying both "Development->Export" and "Save as->XML Data" procedures, but it always saves all data in the XLS document, not only the filtered. How can I obtain a new XML file with only filtered data???
View 9 Replies View RelatedExport TXT File Into Specific Pre-made Fields In Excel?
Aug 13, 2014I work for an environmental company and we do emission testing. We specifically use the analysis software CEMsoft and ProRATA. After each test/run we get a text file (.txt) that we print out which then has to put into a specific pre-made excel data file.
I am wondering if there is a way to export the data from the .txt file and into the specific fields within the excel sheet. Can I encode the .txt or excel file to do it for me? Trying to eliminate the need to manually put in the data from the printed out sheet.
Excel 2010 :: Export Selection To MSDOS CSV File With 12 Commas?
Nov 28, 2012Currently using Excel 2010 and looking for a macro that will export a selection (will be part of a column that I select) and export as an MS-DOS CSV file (no quotes around values, each row on different line) with 12 commas after each value in the selection.
Attached is an example of how I would like the output to appear, with the selected values only have four numbers in them. If possible, I would like a dialog box to appear for saving the file to a directory and name that I chose.
_________________Sample________________
1234,,,,,,,,,,,,
4567,,,,,,,,,,,,
9876,,,,,,,,,,,,
Excel 2007 :: Export To PDF Command Button Save As File Name?
Dec 17, 2012Excel 2007 I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Code:
Excel 2007: I have a button that will export the worksheet to pdf and save it as Acrobat requires. I have a network folder set up and it saves the file with the name that I have programed in the macro. I would like to have the file name set up to be what is in cell C3 then a space and the specific words.
For example, if C3 contains "123456" I want the file to be named "123456_Warranty Calculator"
I will end up using this in several worksheets which will have a different name as part of the file name (based on the worksheet name).
I would also like to have the last part of the file name be the worksheet name. ie, "Warranty Refund", "PDR Refune", etc.
I will have several users that will be using the workbook and possible saving at the same time and want each person to be able to find the one they saved instead of it being overwritten.
Opening Excel File From List Of File Names Located In Single Sheet?
May 31, 2013loop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
Excel 2013 :: Truncating File Names?
Jan 27, 2014We have had a few instances where Excel 2013 is truncating a filename when saving for example "MF Not Settled - Dec 13 Rental A.." the filename includes additional characters than this but has replaced them with .., I initially thought it could be a file path length issue but the files in question the total length is less than 150 characters including the server name.
This is also happening with links inside excel files to different tabs in the same workbook and well as macro names causing them to have to be ran manually as it has truncated the name to .. at the end.
find some examples below:
Full filename: MF Jan 2014 vols Smart churn sensitivity
Truncated filename: MF Jan 2014 vols Smart churn...
Also if you try to link to the truncated workbook whilst open it displays the formula as:
='[MF Jan 2014 vols Smart churn...sitivity.xlsm]Input c!$E$13
My work around is to save the file to another folder, without closing it, and then it works fine. However, in doing this it will try to save as the truncated name, so I first have to select the correct name of the file in the existing folder, before saving to a separate folder. However, if the file is closed, and then reopened the problem returns.
Copy The Names Of The Docs To An Excel File
Dec 18, 2008I have many Word docs in a file. I need to copy the names of the docs to an excel file.
View 9 Replies View RelatedAuto Excel File Copy And Create Files With Given Names
Jul 13, 2013I'm looking for one macro code in order to generate the excel files and give the standard excel file names.
Example: I have one master file in the given path like C:Temp and input box required to assign the number of file option. If I declare 10 files then my master file should get 10 copies and save it the above path....
Copy Pictures To Another Based On List Of File Names In Excel Error VBA
Mar 4, 2014I am creating a proposal for a online sales store, i have in column A a list of item names that my buyer liked and wants to run, but i have to send them the pictures for the items which is located in a directory on my drive together with all other items. we have 4 category's of pictures 1 is the main image from this we only have 1 of each item, then we have the S category there we may have up to 3 images s1, s2 and s3 not more then 3 and the same is with the R category and with the M as well. We did created a VBA to copy all images from the list into a new directory with all sub pictures into a new sub dir. and bring back a list of all images not found. But i am having a problem when i run the code if it dosnt find the image looking for (for instanse EAR11-M1 the code stopes there looking for the file even the error checking in the code is set to resume what is wrong with code?
View 3 Replies View RelatedExcel 2007 :: Loop Through Every File In Folder And List All Sheet Names?
Oct 9, 2012I was wondering if anyone had any code to loop through every file in a folder and list the file name along with every sheet name in that file? I'm using Excel 2007.
View 4 Replies View RelatedExport A Group Of Names Then Match And Dump The Corresponding Number Into The Spreadsheet
Jun 23, 2006I have a worksheet that has 2 columns on it 1 is numbers and the others are
names. I want to be able to export a group of names from one of my programs
and then have excel match the name and dump the corresponding number into the
spreadsheet. I beleive I can use vlookup but I am not certain
Export Data From A Template File To Total List File Using Macro In Template File
Dec 18, 2012I have a template file for ordering trafolyte and steel plates. I have added macros to this template file. The existing macros do the following (shortly described):
Macro 1: clears order
Macro 2: update order date + send a read only file to the supplier of plates + save a read only copy of the file into one of three folders acc to info in one of the cells.
It's the Macro 2 I want to edit.
I want to add a "function" which copy a selection of data.column A to N from row 12 to 548 but only the rows where there is a value in column A.
Row 1 to 11 includes standard order info and Macro buttons.
Row 11 includes the heading for order data.
For everytime someone click on the Macro 2 button in the template file, I want the selection to be paste into the first "available" row in a "Total list" file.
The "Total list" file may have to be open (or a function to open, paste selection and then close the "Total list" file may be added)
File and Folder info:
To simplify suggestions, the following file and path info can be used (I can change to the correct later):
Template file name: template_order.xlsm
Template file location: \servershared emplate
Total list file name: total_list.xlsx
Total list file location: \servershared otal
Selection info:
The template file exists of a "general order info area" A1:N10
The column heading for order data is located at A11:N11
The selection to be copied is A12:N550 - But only rows where column A includes data (not empty).
(If the spesific order consists of 14 plates than there will be item no 1-14 in column A and I then I want to copy A12:N25 (row 25 will be item 14).
When I try to use record macro it looks like it only records what's happening in the template file - It doesn't record the pasting in the total list.
File Names :: File Renaming Each With The Names I Have On Another List
Jun 13, 2008I have a task I would like some assistance with…
I have a work book that I have to copy over 70 times for over 70 work locations. As you can see, this will require different file names for each location.
I would like some have help with a code that I can use. If possialbe I like a code that will make copies of the file renaming each with the names I have on another list. Is this feasible?
Table Names Revert To Cell Names When File Is Reopened
Jan 4, 2013I have a worksheet with many tables that I use in formulas.
I like tables for a couple reasons, one being the ability to insert/delete rows without affecting the rest of that worksheet row.
Also, automatic copy of formulas/formatting is great.
But, what I really like about tables is the ability to use the naming conventions in formulas.
Problem is when I save this worksheet, after I close it and open it back up, all table references in my formulas have been converted to cell references.
Example:
Code:
=IF((SUMIF('Quote 1'!$M$28:$M$43,">"&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&'Quote 1'!$J$57:$J$60)*'Quote 1'!$G$57:$G$60)+(COUNTIF('Quote 1'!$M$28:$M$43,""&tblOSSRV[Min Order Cost])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],""&tblOSSRV[Min Parts Per Line])*tblOSSRV[Cost / Part])+(COUNTIF(tblFam[[#Data],[Qty by Factor2]],"
Create Array Of File Names/sheet Names
May 1, 2008Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
Export To Text File - One File Per Row?
Jul 27, 2012how to automate exporting a spreadsheet to text files so that each row in the spreadsheet becomes one text file (named from the first column)?
View 3 Replies View RelatedHow Export File To .txt
Sep 4, 2008How can I export an Excel file to .txt following a pre-defined layout plus adding a space between the values of the columns?
Example
These are the columns:
NAME: 04 DIGITS
LOCATION: 03 DIGITS
FINAL LOCATION: 03 DIGITS
ZONE: 02 DIGITS
FINAL SUBZONE: 04 DIGITS
CODE: 02 DIGITS
"WHITE SPACE": 39 DIGITS
Folder Names Instead Of File Names/macro
Dec 10, 2008I need to make this macro read FOLDER names instead of FILE names. When I posted this question yesterday to get this macro, I wasn't told that each file in its own folder. I need the folder names now.
_____________________________________
Sub test()
With Application.FileSearch
.NewSearch
.LookIn = "C:Ford"
.SearchSubFolders = False
.Filename = "*.*"
.FileType = msoFileTypeAllFiles
If .Execute() > 0 Then
For i = 1 To .FoundFiles.Count
Cells(i, 1) = .FoundFiles(i)
Next i
Else
Cells(i, 1) = "No files Found"
End If
End With
End Sub
Lookup To Set Up Export File
Mar 21, 2009I have a spreadsheet that my field workers use to collect data.(See 'Capture Form'). On the main worksheet they use drop-down lists to enter the data. These lists are drawn from named ranges on other worksheets. In the column next to these ranges are the respective ID numbers.
I want to set up a worksheet ('Export') that mirrors the capture worksheet 'Capture Form' but only includes the ID numbers so that I can import into my Access db. I'm sure it's probably just a simple worksheet function but I don't know how to do this.
Export Large File
Oct 30, 2002I have a database of 75000 rows in text format which has to be converted to excel, but the limitation in excel is only 65536. hence, I want to a macro that will copy the 1st 65536 rows into the 1st sheet in excel. The remaining rows should be copied into the second sheet. I know that it can be done with access. but i dont want to use access.
I have got a code to do this, but it takes much too long. if the code could be modified to make it faster,
Sub LargeFileImport()
'Dimension Variables
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
'Ask User for File's Name
FileName = InputBox("Please enter the Text File's name, e.g.
Export As PDF (with Specific File Name) Not Working?
Aug 11, 2014I have this code (not sure from which thread) which can export my worksheet with specific file name & folder (according to date and part type). I tried to put it in my worksheet but it's not working.
[Code]....
and it's highlighted at following part
[Code] ....
I received this error from the message box : Run-time error '1004'
Document not saved. The document may be open,or an error may have been encountered when saving.
Vba Code To Export Image File
Nov 10, 2006I would like vba code that will export a given group of cells, or a defined print page area to a jpg file (preferable, but other image format would work). I'm planning to create a program that will change some cell data and create a jpg file for various sets of data.
I suppose if that's not possible that another alternative would be ok, so i'm open to suggestions, but the export to jpg format would be great. I found a little program that will do it, but i wanted to include the code in my program to make it all automated.
Export Selection To Text File
Dec 23, 2006I'd like to be able to highlight a row of data in an Excel spreadsheet that were just entered by the user, click on a button that's linked to a VBA macro that exports the highlighted data to a text file (with a .txt extension), saves that text file & exits from it without the user having to say Yes to a dialog box that asks if he/she wants to save.
View 9 Replies View RelatedExport Csv Without Changing The Format Of The Original File
Nov 20, 2013In any other software, when I save a copy, or export to a different format the original file remains unaffected but in an excel it seems to work differently...and I end up having to save my file back to the xslx format. this extra time wasted when I am regularly exporting but it also makes me a bit nervous that I might accidentally not save back to the format with all my worksheets etc etc..
View 1 Replies View RelatedExport Sheet As Text File With Tab As Delimiter?
Aug 6, 2012I have one table in word format and a sheet in excel:
word table:
Part # ID
1001 C1,C5
1002 C2~C4,C6-C7
1004 A10
excel sheet :
ID Color part #
C3 white
C1 blue 1001
C2 red
A10 black
C4 red
C5 greed 1001
C6 grey
C7 pink
I need to write a script which will take an id in excel sheet , then look up the part number in word table , copy the part number into excel sheet. So the sheet will look like this:
ID Color part #
C3 white 1002
C1 blue 1001
C2 red 1002
A10 black 1004
C4 red 1002
C5 greed 1001
C6 grey 1002
C7 pink 1002
at the end, I need to export the sheet as text file with tab as delimiter
Is this possible using VBA?
VB Script For TXT File Parser / Sort And Export
Apr 20, 2013I have a large number of data files for a game, they are text files but have various extensions (like .weapon or .shipsection). These files contain a code hook and a integer,boolean or string separated by a space and or tab. There are a set list of available code hook variables (around 250) but each text file only specifies relevant ones to be changed from default. I would like to have 2 Macros, one to import existing txt files and one to export. The goal is to be able to have a database to manage these individual txt files without editing them manually.
Here is one of the .txt files
Code:
weapon
{
name 'PD Interceptor'
weaponclass pdmissile
weaponfamily missile
model1 "" // insert barrel model for tiny mounts here if we get them
model2 barrel_pdmissile.X // NOTE: model2 for tiny pd weapons in small mounts
[Code] .....
In excel I have a page intended to be a export template containing all the existing code hook types. I want to create another page using the importer with columns for every hook instance and rows for each txt file instance. Column 1 must be the txt file name and the rest of the columns populated only if the hook is present and with the value associated. Export would work by reading values off the database for each row into the template page if they exist for each column and create a text file using tab as delimiter.
Here is the scripts I have so far:
Import:
Code:
' ---------------------- Directory Choosing Helper Functions -----------------------
' Excel and VBA do not provide any convenient directory chooser or file chooser
' dialogs, but these functions will provide a reference to a system DLL
' with the necessary capabilities
Private Type BROWSEINFO ' used by the function GetFolderNameB
[Code]......
I used a script with directory navigation but the import one does not work properly...Is this too much to ask of macros?
Macro, Export To Text File, One Row At A Time
Apr 8, 2009I have a spreadsheet that currently looks like ........
My problem is that I want the macro to create either (a) a seperate text file for each line (1 for line 2, one for line 3 etc etc) or even better (b) create a file for the specific line i am on. For example if i happended to click on D5 and then pressed the macro key it would onyl create a txt file for line 5, same if i clicked on E6, it would only create a file for line 6.
I would be grateful if you could highlight the code you insert into my macro as it may be useful for other reports i run.
Skip Blank Row When Export To Text File
Oct 22, 2009I have macro that exports certain range to text file. It goes through first to last row and exports it to Text file. Here is the part of the
For Each myRecord In Range("A2:A" & Range("A" & Rows.Count).End(xlUp).Row)
With myRecord
For Each myField In Range(.Cells, Cells(.Row, Columns.Count).End(xlToLeft))
sOut = sOut & DELIMITER & DEL & myField.Text
Next myField
Print #nFileNum, Mid(sOut, 2)
sOut = Empty
End With
Next myRecord
The problem is that sheets might by empty. I would like to add something to this code ( I guess some IF condition) so that all blank rows are skipped and not exported to text file.