I'm running 2007, and have a mailing list that is setup - A1 = text(full name of company), A2 = text(full street address, city, state, zip) NO PUNCTUATION.
I have been able to separate each word for the address line, but this leaves me with many different length addresses spread out over different cells, so taking just the city state and zip is not feasible in large numbers. I have over 10,000 of these listed down column A1.
I need to be able to extract city, state, and zip, (There is no punctuation in the address line)and put them all in one cell, for the third line of the address box. I need them to cut from the source, also - leaving the source only the street address.
I have many cells that have full names in them. They are currently formatted as follows; last name, first name, middle name. I am trying to extract only the last name and first name (keeping the comma in between them) and drop the middle name.
I am using the extract words function outline here [url]
I copied and pasted the function into a new sub and deleted the sub module1 and the end sub to make sure it is it own function I can call. I have called it in another macro I wrote and when I run the macro it bugs out at the first if statement. The code it has a problem with the Get_Word code below. It throws a "Run-time error: '1004': unable to get the Find property of the WorksheetFunction class."...
I am trying to extract numbers after a specific text in a text, for eg :
abc SN 12345 xyz edf SN No. 456 mno
As per above, i want to extract any numbers afters "SN". the numbers can be vary in digits i.e. it can be 3 digit numbers or 4 or 6. Also, at times there is some other text in between (like SN No.) numbers and search word (i.e. SN)
If I have a cell filled with any number of given names (no surnames) (e.g. John Peter William Suffolk - yea, 4 names!, or Harry Murray (2)), how can I extract the first letter of each name (i.e., the first letter following a space) and place that in another cell? Say A1 has the names, B1 has the surname - I want this in C1. In D1 I'll use a function like Text or concatenate to link C1 and B1.
1924 ogden place blvd west unrulu 982 n aoto st apt #1234 easrlr ...
and I'd like to use a couple of formulas in the two columns to the right of this data 1st column:a formula to obtain the number of words in a cell 2nd column:a formula to extract the last n words from a cell (ex. the last 2 words)
so that the columns would have as their results 6 west unrulu 7 #1234 easrlr
I need to extract all instances of words that have format xnnnnnn, where x is an alpha character (letter of alphabet, to be precise) and nnnnnn are numbers. The words could something like u435586. The problem is I do not know how many instances of these words are in the string. The entire string is contained in a cell. A sample string could be something like:
I have a text string with 3 data to be extracted and then split throu range, but only specific parts is needed.
string is like that: Name Surname - Number : ################ - Exp : YYMM - Centre etc etc....
Lets say its allways happens in cell A3, for example: Adrian Kukuwas - Number : 1235467890123456 - Exp: 1009 - Centre... I would like a macro:
*that runs only if string starts with a letter, then if so *takes Adrian Kukuwas to cell D3 *takes 1009 (the exp) to B3 and makes it look like 09 10 (or 09_10) *in A3 leaving only the number 1235467890123456 text formated (sometimes the copy source formats the cell for bad)
I'd like to extract just "blue.red.yellow.green" to the following spreadsheet column, keeping the intermediate dots, but getting rid of the first/last words and their succeeding or preceding dots.
I've tried using RIGHT, LEFT, MID formulas unsuccessfully
I have a column of words in Column A and I want to replace all the times that these words appear in the rest of the excel sheet with the words in Column B. If someone has already answered a similar problem link me to the thread because I can't find anything.
I have hundreds of file names, and to cut a long explanation short, they are exported as a CSV file to excel. In order indentify the owner of the file I need to rename the file with a commar where you see the dash or the underscore in order to have the name appear in the next cell, as can be seen with Syma and Kevin below, so I can then sort the columns etc etc.
I know there is a formula that I can use to achieve this, ie have syma.pdf and kevinc.pdf in the next cell.
I think it works on identifying how many characters along the name and then send i to the next cell.
as you can see below, there is no set amount of characters to put into a formula.
Could I say, for example, if after dash /underscore put next word in next cell?
I am trying to clear the contents of cells in a very large spread sheet containing certain words. I am running the following macro and it will only do the first part, so it will clear cells containing "deceased" but stops at "esa". There may be any number of other words or text in the cell and I want it to delete cells with "esa" by itself so for ex. not delete cell containing "vanesa". I am very amateur so I am sure this is something simple but I cannot find the answer or figure it out for myself.
Sub DeleteAll() Dim lCount As Long Dim rFoundCell As Range Dim rLookRange As Range Set rFoundCell = Range("A1") Set rLookRange = ActiveSheet.UsedRange For lCount = 1 To WorksheetFunction. CountIf(rLookRange, "*deceased") Set rFoundCell = rLookRange.Find(What:="deceased", After:=rFoundCell, _ LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, MatchCase:=False) rFoundCell.ClearContents.......................
I'm looking for a macro to remove all words (in a single word per cell format) in a range (approx 100 columns & 7000 rows), except for a list of 100 words.
I've been using conventional method to do this and it's time consuming. I would like to total up 2 column. A multiply B to be exact. Below are some examples:
Table 1 - Before totaling up:
Quantity Product 5 2 x Button A White 3 4 x Button B Pink 4 5 x Ribbon A Black 2 3 x Thread A White 6 2 x Cloth A Blue
Table 2 - After totaling up:
Quantity Product 10 Button A White 12 Button B Pink 20 Ribbon A Black 6 Thread A White 12 Cloth A Blue
I need to have the sum of the "Quantity" multiply "Product". Or in short A x B. And the end result need to have the number and "x" sign removed while keeping on the the products names. (2 x ) Take note it's "number" space "symbol" space.
All words are in Cell A, separated by the ";" symbol. I want separate into different Cells. Example... Lead_ID in Cell A1, Application Data in A2, Date Purchased in Cell A3 and so on.
I have database of customers and one collum is labeled "Name and Family name". I want excel to split this records in two collums, ergo one labeled Name, the other one Family name.
Note: there are also some names like Furio Alipo Novanta, so in that case I want excel to keep Furio in first cell, and move other stuff next to it.
I have a column that is filled with text of varying lengths and I'd like to search through each cell in that column looking for a specific word or words. Unfortunately the length of the text varys greatly between each cell and there is very little uniformity so I need to be able to search through the entire entry in each cell and then highlight that row if a specific word or words are found.
I'd also like to be able to add a number "1" in another column on the same row if the search finds a word or words. Any help would be greatly appreciated.
If the cell only contains the exact word or string I'm looking for then it's easy but I can't figure out how to search through text in a cell that contains more than I'm looking for.
example: Lets say I'm loooking for "caught fire" column Q contains: 1 "The computer caught fire after several hours" 2 "A house on the hill caught fire"
If "caught fire" exists in the cell being checked, then highlight the row and put a 1 in a specific column, lets say J.
Very simple program I think, can either be solved by build-in functions or macro. So situation is I have a table, where the D column, contains certain words.
Now I have table where the M1:M10 column contains the same words and the corresponding column (N) contains the value.
So for example , cell D5= "A" and I find that cell M6 is also "A" so I then go at cell N6 which has the value "3.3". So now I want I5 to have the value 3.3 in it.
In Summary, I want the value of the n column copied into column I. Now I have plenty of rows in the D column so I prefer a fast way.
I have some data that is imported, it's about 25,000-30,000 characters and 2,300- 3,500 words, it all comes in as one cell, A1, if I do a text to column on it I will loose everything past column IV. Is there anyway a macro can take the data and put each word in a cell by its self starting in A2? The words a have a space between them.