I have copied and pasted a big table to excel. All the images have links and I need to extract that URL and post on it's own cell.
I have tried some hyperlink extracting code but I realized the images are not necessarily in a cell.
Is there a way to do this?
and by the way, is the a way to make the images show? I know they are there but they don't show.
I have managed to find some code which, upon pressing a command button on the 1st worksheet in my workbook it:
1. populates a list of the names of all the other sheets in the document
2. converts each name into a hyperlink that when clicked, opens the sheet. (or at least it should)
3. Add the word 'menu' in cell A1 of each sheet that is a hyperlink back to the menu sheet
There are around 40 sheets in the document so you can see why this is easier than scrolling along the bottom to find the correct one. Or it should be.!
I have a spreadsheet that I have various formulas and sheets. To simplify:
Sheet 1: Columns A & B have Name and Code Number. I can add additional names and code numbers to these two columns whenever necessary.
Example:
Tom 874
John 385
David 712
Hidden in adjoining columns are formulas to automatically sort them via Code Number. Next to that are the columns showing the sorted information, sorted by number.
John 385
David 712
Tom 874
Additionally, I have a seperate sheet for Tom, John & David. Since I put Tom in first, he's Sheet 2. John is Sheet 3, and David is Sheet 4. I can use hyperlinks so when I click on John, it goes to Sheet 3; David Sheet 4; Tom Sheet 2.
Now, let's say I add Kevin 192 to the next row. The hidden columns are set up so that it'll automatically resort Kevin to the top, with John, David & Tom in the next rows down.
The issue I have with the hyperlink is that it's cell specific, not content specific, as far as I know. I would like the hyperlink to move with John's info so that it would still go to Sheet 3. Same with David and Tom. Unfortunately, after the resort, If I clicked on Kevin's name (which is now at the top of the list), it would go to John's sheet, since the hyperlink is attached to that cell.
How to allow a hyperlink to remain with the content, versus the cell? I would prefer it to be not a macro, but I'll take a macro over nothing!
I have a spreadsheet of various works-in-progress items, the first three columns of which refer to relevant documents, effectively the request, the estimate and the work order, i.e. RXXX-0001, EXXX-0001 & WXXX-0001.
So the text is entered as above (without file extension as it's also our reference number), and I'd like each to be linked to their respecive .doc files, which are held in different locations, i.e. \servernamefolderRequests or Estimates or Work Orders
e.g. \servernamefolderRequestsRXXX-0001.doc
There's a backlog of over 300 items (so 900 links) so I don't want to go through and manually create the links and as each day can see over 12 items being created it'd be much easier to have it done at the click of a button
Most of the solutions I've seen involve creating a new cell/button with the hyperlink in it - I just want to effectively "right click, create hyperlink" but with the cell contents inserted as the file name (adding ".doc") and with correct folder name too.
FYI the cells are adjacent to one another e.g. A1, A2 & A3 so the selection can be Offset (0,1) for the estimates and work orders.
I don't mind if it ends up being a case of running the macro on each line - some links have already been created already.
I have around 50 items in my combobox list where i would like to attach an image on each item and show up on the userform when a certain item is picked. Kindly assist on what code is best for this operation.
View 9 Replies View RelatedIn Excel, I have a sheet for each team that I manage. Each sheet lists the team members and displays their picture below their names. Some people are on multiple teams/sheets.
I have a master list with everybody's name and picture that I copy and paste the pictures from when putting a team together. This has become a very tedious process.
Is there a way I can type the person's name on a team sheet and have their picture automatically appear below their name? I don't know if this can be done with some kind of lookup or if it will involve VB. I tried making the picture the background of an Autoshape or comment, but I could not figure out how to dynamically change the picture based on the name in a cell.
It is possible to link excel cell to a image and when need i can see it just typing in cell.
View 4 Replies View RelatedThere is a problem in joining one cell to the other file
The below is screen shot when l click the on every cell the image must be open
How can do it?
Capture.PNG
I have a spreadsheet and within the first sheet there are lots of hyperlinks to other cells within sheet 1 (my template).
I have made a small macro which very basically makes a copy of sheet 1 (my template)
The hyperlinks in the template are explicit and as they are copied to sheet two, they still reference back to cells in sheet 1. I need the hyperlinks to be relative, so that when I make a copy of the template the hyperlinks are copied and make reference to cells in the new sheet. I cannot work out how this should be done
I need to link an image to a cell value and display the selected image in a new sheet of the same excel. I am attaching samplefile for easy reference. The requirement is, from the workout sheet when I select from drop down list, then the corresponding cell value appears in Parameter sheet in C9 cell.
There are four images copied in Parameter excel. The given image has to be selected and linked to the C9 cell value. Based on the selection that particular image should be shown on Sample Picture sheet. Here based on the selection only the image should reflect here.
I need to find an easy way to locate an image on my server and upon selection rather than inserting the actual image I need to insert the image path. e.g. "s:imageshighresgreen1234.jpg"
View 3 Replies View RelatedMy workbook simply has multiple columns of data which will be summarized visually in a tag cloud (I have the tag cloud part taken care of already creating either a jpg or png, I simply have to change the extension within a batch file to change between picture formats)
I need to have the tag cloud image display and update depending on which column the user would like to summarize (for now I have simplified the issue by only having one of the data columns in my workbook, and will worry about the user selection of the data column to be summarized later).
My Main Question:
Focusing on the image display and updating now, whether it be an ActiveX Image Control or any other way. I've been playing around manually before I try and code it and I can not get either a jpg or png file to attach to the ActiveX control (both of which cause an Invalid Picture Message).
The file name can stay the same if need be and for now I think/assume that'd be easiest (I have my Tag cloud generator just replacing the previously existing image file of the same name).
Would ActiveX control be the way to go for this dynamically changing image?
I am looking for a way to take the picture name associated with an image ie: (picture 571) and place that picture name in the cell next to the image.
I can see the picture name - it registers in the top left box that usually indicates the cell the cursor is on... and I could manually type that name next to each image.
However my spreadsheet has several thousand rows- each with several columns of information and an image..
I am looking for a way "formula?" to automatically read the image in cell J4 and populate cell K4 with the image name... and so on.
The reason for my request... is I am importing products into a web based shopping cart... to do so I have to export the products to a csv and import that csv into the shopping cart. The process of exporting to a csv- strips away all the images and leaves just data.
I found that I can save the document as an html and that process creates a folder with all the images- saved as (picture 571.jpg) if the resulting csv had the image name... the shopping cart would then look for that image name in my image file and it would populate into the shopping cart appropriately.
This seemed on it's face like a really simple thing to do, I have plenty experience with excel & I thought I'd be able to make cell k4= j4 and tada it would glean the image name & I could simply copy that formula all the way down the sheet & it would be done... but I just cant find the magic button that freely gives up the image name...
I have a dataset that includes the path and optionally an HTTPS URL to an image. Is it possible to embed this image in a cell?
Short of that what might be some other options?
is there a way to load an image out when u type the image name in the textfield.
Example when I type in my name it load my image out beside the name.
I have a number of image controls on a user form, each being loaded with an image from file.
Image1 being loaded with a picture of a bus image2 being loaded with a picture of a school
And so on
Now what I am trying to do is when that image is clicked the name of that image is passed to a textbox
So the action would be
1 image of bus loaded into image control1 , the name of that image being bus.jpg
2 image is clicked
3 the name bus.jpg appears in a text box
Here is what I have so far
Code:
Private Sub Image1_Click()
DataInput.TextBoxItem.Value = bus.jpg
DataInput.TextBoxItem.Value= Image1.Name - this does not work
End Sub
Which works but as you can see this is static, as I have supplied the value , were as I would like the clicking action to pick up the name of the jpeg being displayed
So expanding upon this if say image1 is loaded with say a picture of a car instead of a bus
LValue4 = "E:Car.jpg"
Image1.Picture = LoadPicture(LValue4)
Now when it is clicked the name of the image being displayed in image control1 would be Car.jpg
And it is this value I wish to transfer to a text box for now will do more with it later
In addition to this I am not sure if the best idea is to have a number of image controls and load each with an individual picture or have one image control and swap the picture by clicking a command button
Is there a way to have image box display an image with a name matching data from a cell? example: if I type "hello" in cell a1, Image box will load image named "hello". And display new images by changing the name in cell a1. Note: the images will be located in a permanent folder.
View 3 Replies View RelatedI am trying to display an image ("image") on an image control ("Image1") placed in a worksheet ("Sheet1"). The problem is that I want this action to take place when I press a button in a user form. I am trying to use the following code, but it seems that VBA does not recognize the image control ("Image1") in the worksheet.
Private Sub cmdDisplayImage_Click()
Dim image As Variant
image = ThisWorkbook.Path & "sun.jpg"
Sheets("Sheet1").Activate
Image1.Picture = LoadPicture(image)
End Sub
I have a directory folder with an active workbook and another workbook id like to copy data from. The Following macro opens up a file in the same directory, copies some data and pastes it in the active workbook. However with this code I have to specify the filename, 'Data.xlsm' in the example code. I would like it to copy data from the only other workbook in the current directory WITHOUT having to specify the name in the code, so just opening it up no matter what filename it has.
In addition I would like to extract the filename from the workbook im copying data from and paste it into the activewoorkbook in sheet 1 Cell A1. I had a look at getopenfilename function but cant seem to make it work for my purpose.
I have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
With this msg i am attaching one excel. I have the data on the basis of "image wise files data", but where how to get "record wise image numbers", i am unknown on this.
Image Wise Data final-1.xlsx‎
I have a spreadsheet that when an identity code is keyed in, it will display a make and model of a particular mobile phone, i want to put a hyperlink in the cell next to the phone name which will then open up an IE window to a website.
The thing i want ideally is if there is any way you can incorporate the websites search function into the hyperlink so when you click on it, the hyperlink will copy the phone details over to the website's search engine and take you straight to the online details of the phone?
wow this isnt making sense to me!
For e.g
The identity code shows up a Nokia 1500
The hyperlink next to it takes in the manufacturer/model details "nokia 5300" (these will obviously vary each time so takes in a cell reference should i say)
It opens up the ie window e.g "google" and automatically searches for that "nokia 5300" and comes up straight away with the search results.
Is there a way of using something like hyperlinks in VBA code to open a user form?
I presently am using hyperlinks for coworkers to open other pages that resemble a user form.
I would like to change this to actually using user forms.
I would prefer to simply click on a person's name and open the form.
I need returning a working hyperlink from a vlookup. I have a table with part #'s and hyperlinks. On another tab I want to type in a part number, have it search the table and return the working hyperlink. This will allow the user to just click it and go to that tab.
Here is my example spreadsheet : Book1.xlsm
I created a data base that had a hyperlink to a plan of the store so we can find parts easy. With a lot of help for people here on this web site, it works very well.
My only problem now is that I sorted my Database by the hyperlink column. It made it easy to do one hyperlink and pull the fill handle down for the rest of the same hyperlink reference.
When I went to resort the database so that the parts were in alphabetical order. The sort worked well except that the hyperlink for lets say cell F87 was not sorted. Example : - F87 hyper link presort had the reference to Rack 10 self B. Post sort it had the reference to Rack 16 shelf C. But when clicked on it still took you to Rack 10 self B.
When I click on a hyperlink inside an Excel spreadsheet, it is linked to a PDF file. When clicked, the screen flashes the Adobe Acrobat program for a split second and then disappears. But I can open the hyperlink same as which it is linked to a word file in the same directory.
I have gone into folder options and switched the PDF to open with Adobe reader 8, but that does nothing.
Any ideas of how to get the PDF to open and stay open would be most appreciated.
I tried to install adobe reader 4.0 without uninstall adobe 7.0 professional.
I use pdf reader 4.0 open the Pdf file in the window explorer, and then go to excel, open the same hypelink pdf file, and find it works now only opening pdf document by pdf reader 4.0 but not by 7.0.
But when I resinstall adobe 7.0 professional, and the problem still occurs. I have to open the original pdf file in the directory by adobe reader 4.0 again.
My case is like the following Macro in excel.
Setup hyperlink and open it . Then the problem is shown as my previous thread mentioned.
Sub Review() .....
The following is a simplified example of my problem: I have a list of product item numbers in column A. Next to each item number in column B, is a hyperlink to a PDF file relevant to each item. Elsewhere in the sheet, is a drop down box containing the item numbers. Next to the drop down box is a HYPERLINK(VLOOKUP) that fetches the relevant hyperlink depending upon the selected item in the drop down box. Problem is, when I select the ‘lookup’ link, I get an error message ‘cannot open the specified file’ (the original Hyperlink works fine). Does anyone have a solution to this problem (preferably without resorting to Visual Basic?
View 13 Replies View RelatedI have a database of two columns - a file name and a hyperlink for the folder path to that form. What I would like to do is a VLOOKUP type search by the form name and the result be the hyperlink itself. The problem is that vlookup basically provides a "Values Only" response and doesn't carry over the hyperlink format.
View 2 Replies View RelatedI made the mistake of creating hyperlinks to files on a server (using the \SERVERNAME convention) without using the "hyperlink base" option.
I've been sufficiently chastened, but the present problem is that I have many such hyperlinks that are now worthless because, when saved, they point to "../../[foldername1]/[foldername2]/[filename]", etc.
Need macro that would replace the first five characters ("../..") of all the hyperlinks on my sheet with //[MYSERVERNAME] ?
how to use a combo box to select hyperlinks to take you off to the selected website? I have this, which works but it's hard-coded - I'm looking for something a little more dynamic, i.e. pick up hyperlinks from a range on a sheet.
View 2 Replies View Related