i am trying to read the file name in a specific folder through macro of my EXCEL application. i wondered that it is reading that file name in all Lower case.
Ex: the file name in the folder is "Ford of Pompano.xls" when i am reading that name from macro, it is giving me as "ford of pompano.xls". Do i need to change any default settings in EXCEL so that it can read the files names what ever is presend in the folder
I need a little bit of help here ... I can read and process a .txt file from my Excel VBA program, but I am having trouble as follows :
The file I am reading contains a number of heading lines, followed by a number of data lines.
All of the data lines end in a date, so I can use the code ...
If IsNumeric(Right(MyDSRec, 1)) Then
... to pick up the data lines & ignore the heading lines. This is fine and works perfectly.
However, the .txt file that I receive is out of my control, and is prone to error, in that the data line occasionally has what I assume is a "Tab" character after the last date, which means that the line above does not recognise the last character as being numeric.
If you double click "06" at the end of each line on the example below, you should be able to see what I mean (in the .txt document, if I place the cursor at the end and press backspace, all characters at the end are deleted, back to the 06, so they are not individual spaces) ...
RAMSEY1129/0503/0603/0613/06
SHAKESPEARE 1102/0609/0609/0618/06
PREMIER603/0604/0605/0618/06
I am running into one of the strangest issues I have seen in a long time. I have a user defined type that I utilize in VB6 and write out to a binary file....
View 7 Replies View RelatedI have a .csv file that contains numerical data in the form of strings, much of which starts with leading zeros (i.e. "012345"). I double checked to make sure the .csv file has the leading zeros and that they are wrapped in quotation marks in notepad, and it does. However, when Excel opens the file, it must read those strings as numbers, becuase it chops off the zeros. Does anyone know of way to fix this? Can Excel read numbers as strings straight from a .csv file?
View 3 Replies View RelatedI am running a DOS command to create a directory listing of ONLY DIR files with the short dos filenames and the long filenames. The command used is
DIR /A:D /X /N /S > c:sampledata.txt
Once read into excel, I simply want to have a spreadsheet with the following:
Directory Path Name, DIR Short Name, DIR Long Name
Anyone have some code to already do this? I have attached the sampledata.txt file to go with the pseudo code.
I want to read in a space delimited file and to put each line in one cell starting with cell B2 (I will take care of splitting it into columns later). However, rather than reading one line at a time, it reads in the entire txt file at the first pass......
View 5 Replies View RelatedI would like to read a few custom properties of excel workbook, even if they are close.
My intention is to build a list of compatible workbooks.
The compatibility woul be determined fom a custom property.
How can I read a custom property from a file wothout opening it?
when i run this code under a button on a sheet it works fine. but i would like to run when the workbook opens (but i get an error message
On Error Resume Next
Application. ScreenUpdating = False
Dim wb As Workbook
Dim ws As Worksheet
'create new work order number...
Set wb = Application.Workbooks.Open("c: empex_ExternalOrderNumber.xls")
Set ws = Worksheets("NumberIncrement")
'get new WO number from numberincrement.xls
If Err.Number <> 0 Then
MsgBox Err.Description & "...help"
Else
mynewnumber = ws. Range("b1").Value
Range("g5").Value = mynewnumber
wb.Close
End If
Application.ScreenUpdating = True
I have been using this code to choose multiple files to manipulate:
View 3 Replies View RelatedI have to excel files
1. Temperature & Humidity Reading
2. Summary
I tried to copy a date from Temperature & Humidity Reading file using the formula ='[Temperature & Humidity Reading.xlsx]Sensor 7'!$C$2 to Summary file
if the date format is like this 6/10/2013 12:00:00 AM the result is fine, but when i try to copy that formula for the succeeding dates the results is same from what i copied.
I have a template file for ordering trafolyte and steel plates. I have added macros to this template file. The existing macros do the following (shortly described):
Macro 1: clears order
Macro 2: update order date + send a read only file to the supplier of plates + save a read only copy of the file into one of three folders acc to info in one of the cells.
It's the Macro 2 I want to edit.
I want to add a "function" which copy a selection of data.column A to N from row 12 to 548 but only the rows where there is a value in column A.
Row 1 to 11 includes standard order info and Macro buttons.
Row 11 includes the heading for order data.
For everytime someone click on the Macro 2 button in the template file, I want the selection to be paste into the first "available" row in a "Total list" file.
The "Total list" file may have to be open (or a function to open, paste selection and then close the "Total list" file may be added)
File and Folder info:
To simplify suggestions, the following file and path info can be used (I can change to the correct later):
Template file name: template_order.xlsm
Template file location: \servershared emplate
Total list file name: total_list.xlsx
Total list file location: \servershared otal
Selection info:
The template file exists of a "general order info area" A1:N10
The column heading for order data is located at A11:N11
The selection to be copied is A12:N550 - But only rows where column A includes data (not empty).
(If the spesific order consists of 14 plates than there will be item no 1-14 in column A and I then I want to copy A12:N25 (row 25 will be item 14).
When I try to use record macro it looks like it only records what's happening in the template file - It doesn't record the pasting in the total list.
I have a requirement to download a lot of historical data files from the archieve of an website. The url goes something like this: [URL]....
This downloads file for 21022014 ie. 21-Feb-2014. I need to be able to have a facility to have a selection criteria on my user form (in excel) where I specify a date range and the macro automatically downloads all the valid excel files available within that date range (files for Saturday, Sunday and some holiday dates will not be available in the website archive database) one after the other (like at single clcik of button) into a specific location (predefined viz.. c:/Users/EOD files/) on my laptop. Best would be if I am able to select the save location run time by using a 'Browse' like feature where I go and choose my local laptop folder...same type when we try uploading a file from our laptop to the web..
I am setting up a "save as" macro that saves a file by replacing another file in a folder. Even though the macro has been recorded by approving the replacement (the prompt appears "the file --- already exists. Do you want to replace the existing file?"), when I run the macro, I am again prompted about replacing the file. Is it possible to avoid the prompt so the file is automatically saved by replacing the named file?
View 9 Replies View RelatedI do routine tasks every day which involves opening 3 different files and pasting data into my main file. The data is always in the same format, and the 3 files are saved in the same location (3 different folders through). The 3 files are saved each day and the naming convention is constant, with only the date changing. For example, the files are always saved in C:My Documents and the files are called test_05.02.2013.xls. Tomorrow the file will be called test_06.02.2013.xls and so on.
So each day I will be rolling a file forward and I want to bring in the info from each of these files based on the new day.
How to do 1, and I will do the others (because the concept will be the same).
I have a macro which successully saves a worksheet as new file to another file path....(below)...but I can't figure out how to close this new file and return to the original file...
Dim myPath As String, fName As String
myPath = Sheets("Date").Range("C8").Text
fName = Sheets("Date").Range("C9").Text
Sheets("Sage CSV File").Copy
With ActiveWorkbook
.SaveAs Filename:=myPath & fName
End With'
I have a base excel file for summarizing some data, the problem is that the data comes from a different excel spreadsheet. What I want to do is make a function that pulls the data from another spreadsheet into my base file. It would be easy if it were just one excel sheet, but this job would require where the data is pulled from a data file which has many modified versions.
Can anyone tell me how to do this? The files with the data will be structured the exact same but with different data entered in. I just want a button so I can click the file I want the data from and have it show up on my summarizing base file.
I need to set up an automated process to open an existing .xls file, extract the data from specific cells located in that file and insert it into a totally different file that I have preformatted to accept this data.
Example scenario:
If I have "that_file.xls" and it is unopened, but it contains data in cells "A2 thru F2" that I need to extract... then I have "this_file.xls" , which is open, and set up with all my calculation cells and a specific layout (lets say it has cells "D8, E9, F10, G11, H12, and I13"). I want to be able to add a button to "this_file.xls" to run a macro that would open a file search window where I can select "that_file.xls", and then it will automatically extract the data from "that_file.xls" into "this_file.xls" as follows:
A2 to D8
B2 to E9
C2 to F10
D2 to G11
E2 to H12
F2 to I13
I want to create a macro that will select all the worksheets (names and quantity will vary) and saves the file as the current file's name but in PDF. Since I only know how to record a macro it specifies the worksheet names but I need it for various workbooks. The name will vary plus the number of tabs can go anywhere from 3 to 40.
View 9 Replies View RelatedI am receiving an error at
Set CopyRng = Wkb.worksheet1.Range(Cells(RowofCopyworksheet, 1),
Cells(Cells(Rows.Count, 1).End(xlUp).Row, Cells(1, Columns.Count).End(xlToLeft).Column))
I am trying to copy the first sheet in each file in the designated folder and paste it into a master worksheet.
Below is the code.
'Description: Combines all files in a specific folder to Format File for Upload.xls
Sub MergeMultipleFiles()
Dim path As String, ThisWB As String, lngFilecounter As Long
Dim wbDest As Workbook, shtDest As Worksheet, ws As Worksheet
Dim filename As String, Wkb As Workbook
Dim CopyRng As Range, Dest As Range
Dim RowofCopySheet As Integer
[Code] ....
I presently have a macro that, when run, takes to conents of C4 and C6 and saves a new version of the file being worked on into a folder on my desktop. I love the macro with the exception of one part: I don't want to be prompted to overwrite the file if it already exists. How can I change this macro so that, when pressed, it overwrites the file without prompting the user and waiting for their answer?
Here is the current
Sub SaveIt() ...
When it opens the desired file, it increments the file name by 1 each time it is opened (via the macro).
Example;
The first time it is opened you see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages1"...
I close the file and open it again (via the macro), and see the file name in the header read "P'Binder L&T Pages" for a moment, then it changes to "P'Binder L&T Pages2"...
The file name continues to increment on every opening until the PC is rebooted, then it starts at 1 again.
Sub OpnLTpages()
Dim wb As Workbook
Dim AlreadyOpen As Boolean
AlreadyOpen = False
For Each wb In Workbooks 'Scan open workbooks
If wb.Name = "P'Binder L&T Pages.xls" Then ........................
I'm using the following code to read in any number of CSV files into a single worksheet and concatenating them together
View 2 Replies View RelatedI'm trying to write code that looks at the range W(rowid):Z(rowid) and lists each cell value in a listbox. The row id is coming from the listindex of combobox1. I know the rowid part is correct and working because other operations in my worksheet are using it fine. Here's what I've written so far:
With Worksheets("DATA")
For I = 0 To 4
ListBox3.AddItem .Range("W" + I & rowid)
Next I
End With
In sheet 1 data 123. In sheet2 there is also data 123. In sheet3 will automatically data that is same 123 after reading sheet1 & sheet2. Any data with figure that is same in sheet1 and sheet2 will be reading in sheet3.
View 4 Replies View Relatedthe attached workbook, I am looking for M19, N19 & O19 to read from different locations depending on how many cells are called on when info is entered in P8.
View 10 Replies View RelatedI want to read all the folders names in a folder.
So for example c:win estfolder
And in test folder there are 5 more folders named test1,test2 etc.
I want to be able to give the path c:win estfolder and let VBA excel read all the names of the folders inside the folder testfolder.
I have found some methodes on the web, but those are for files like .txt etc.
The following code reads text one character at a time, and each character is determined either to be a blank space or to be any other character. If it's determined to be any other character, then the character is added to the active cell. If it's determined to be a blank space, then the active cell becomes the cell one column over. The idea is to have different words written in columns next to each other.
The sample text file I'm reading from reads: "text file". The file has only those two words. One space between them. No space before the first word, and no space after the second word. The following code compiles and runs. BUT the result is that the word "text" is in column k, not A. And the word "file" is in column J, not b.
I have a drop down list in my excel sheet that contains names of manufacturers. What i would like to do (using vba) is display some details of each manufacturer that will be copied from a different sheet.
So my question is, how can i read the string from the drop down list on one sheet and then copy a cell from another sheet.
I am building a data base. I have a tab where you fill out of a form and then click an activeX command button to write to the data base. I am wondering if there is a way to record how many times to button is pushed. Each time the button is pushed, I want to record the data from the form into a single row in the data base without writing over old data but I do not know how to read how many rows of data are already there.
View 9 Replies View RelatedI am using the find or search function but I need to read my text string from right to left (from the end of the string, instead of from the beggining). Is there a way to do this?
