I am running a DOS command to create a directory listing of ONLY DIR files with the short dos filenames and the long filenames. The command used is
DIR /A:D /X /N /S > c:sampledata.txt
Once read into excel, I simply want to have a spreadsheet with the following:
Directory Path Name, DIR Short Name, DIR Long Name
Anyone have some code to already do this? I have attached the sampledata.txt file to go with the pseudo code.
I have a formula that reads the date in Colum B on 3 different sheets. The data on the seperate sheets is pulled from a SQL data base and formats the date wtih the time after it.
11-13-2006 10:47
My formula is looking at dates and subtracting them to give a total count of the occurance of the word "Yes" between dates.
My Formula:
=SUMPRODUCT(--('6200'!B2:B65000>=1/1/2006),--('6200'!B2:B65000
I have a time calculation in E2 that is a result of a number multiplied by at time the results are nearly always over 1,000 hrs
I have the below formula to display the results in the format of Hrs and Mins but it isn't displaying correctly ie the number in E2 is 1666:40 so it should read 1666 Hrs 40 Mins but its displaying as 10 Hrs 40 Mins
=HOUR(E2)&" Hr"&IF(HOUR(E2)1,"s "," ")&MINUTE(E2)&" Min"&IF(MINUTE(E2)1,"s "," ")
I need a little bit of help here ... I can read and process a .txt file from my Excel VBA program, but I am having trouble as follows :
The file I am reading contains a number of heading lines, followed by a number of data lines.
All of the data lines end in a date, so I can use the code ...
If IsNumeric(Right(MyDSRec, 1)) Then
... to pick up the data lines & ignore the heading lines. This is fine and works perfectly.
However, the .txt file that I receive is out of my control, and is prone to error, in that the data line occasionally has what I assume is a "Tab" character after the last date, which means that the line above does not recognise the last character as being numeric.
If you double click "06" at the end of each line on the example below, you should be able to see what I mean (in the .txt document, if I place the cursor at the end and press backspace, all characters at the end are deleted, back to the 06, so they are not individual spaces) ...
RAMSEY1129/0503/0603/0613/06
SHAKESPEARE 1102/0609/0609/0618/06
PREMIER603/0604/0605/0618/06
I am running into one of the strangest issues I have seen in a long time. I have a user defined type that I utilize in VB6 and write out to a binary file....
View 7 Replies View Relatedi am trying to read the file name in a specific folder through macro of my EXCEL application. i wondered that it is reading that file name in all Lower case.
Ex: the file name in the folder is "Ford of Pompano.xls" when i am reading that name from macro, it is giving me as "ford of pompano.xls". Do i need to change any default settings in EXCEL so that it can read the files names what ever is presend in the folder
I have a .csv file that contains numerical data in the form of strings, much of which starts with leading zeros (i.e. "012345"). I double checked to make sure the .csv file has the leading zeros and that they are wrapped in quotation marks in notepad, and it does. However, when Excel opens the file, it must read those strings as numbers, becuase it chops off the zeros. Does anyone know of way to fix this? Can Excel read numbers as strings straight from a .csv file?
View 3 Replies View RelatedI want to read in a space delimited file and to put each line in one cell starting with cell B2 (I will take care of splitting it into columns later). However, rather than reading one line at a time, it reads in the entire txt file at the first pass......
View 5 Replies View RelatedI would like to read a few custom properties of excel workbook, even if they are close.
My intention is to build a list of compatible workbooks.
The compatibility woul be determined fom a custom property.
How can I read a custom property from a file wothout opening it?
when i run this code under a button on a sheet it works fine. but i would like to run when the workbook opens (but i get an error message
On Error Resume Next
Application. ScreenUpdating = False
Dim wb As Workbook
Dim ws As Worksheet
'create new work order number...
Set wb = Application.Workbooks.Open("c: empex_ExternalOrderNumber.xls")
Set ws = Worksheets("NumberIncrement")
'get new WO number from numberincrement.xls
If Err.Number <> 0 Then
MsgBox Err.Description & "...help"
Else
mynewnumber = ws. Range("b1").Value
Range("g5").Value = mynewnumber
wb.Close
End If
Application.ScreenUpdating = True
I have to excel files
1. Temperature & Humidity Reading
2. Summary
I tried to copy a date from Temperature & Humidity Reading file using the formula ='[Temperature & Humidity Reading.xlsx]Sensor 7'!$C$2 to Summary file
if the date format is like this 6/10/2013 12:00:00 AM the result is fine, but when i try to copy that formula for the succeeding dates the results is same from what i copied.
I have a macro-enabled template file in Excel 2007. I would like the user to be unable to save in any format other than macro-enabled. They should be free to choose a path and filename, but not the file type.
I presume this means some VBA code in the before save event, but I don't know what.
When I click on the "Office Button", then in the recent "documents dialog box" there is a list of my worksheets plus an "allsenatename" file". This then downloads a worksheet from a website. I don't know how it was added to my list, I must have entered it when looking at that web site in error.
View 3 Replies View RelatedI saved my worksheet in vba .xlsx and for some reason, when I go to the folder that it's saved in and try to open the file I get an error message saying "excel cannot open the file 'PO Acks fo 09-20-2013.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
This is weird because I have another file that I save right before this that opens just fine without an error. Getting frustrating. When I go into the ~Users folder it shows as an excel file and saved as .xlsx.
Where would the link be missing?
Here is the code
Code:
ActiveWorkbook.SaveAs Filename:= _
"G:PURCHASINGSupplier ServicesGroupSharePublic~UsersPO Acks for " & Format$(Date, "mm-dd-yyyy") & ".xlsx"
In Excel 2007, is there a way to format the top 3 values in each row of a pivottable?
View 1 Replies View RelatedI have a workbook that I am working with and I need to formatting the cells so that they will have multiple formulas and I am not sure how to make it work.
Sheet1 Column A is titled 'accounts'. There are 2700 rows under Column A that are being used. Column A is already formatted with a Vlookup formula so I can't add another formula in these cells.
What I need to do is highlight many ranges of these 'accounts' cells depending on their account numbers. I need to input this formula in a separate location on the spreadsheet. For example; If 'accounts' is >=110031100000 AND <=110031100099 then highlight those accounts in 'RED'. and If 'accounts' is >=1200454000000 AND <=120045400099 then highlight those accounts in 'green' and so on...I am not sure how to word the if statement. The formula must reside in column D or greater and not in A.
Am I going about this the wrong way. What I am trying to do is isolate the cells (accounts) that I have referenced on another worksheet so that I can visually notice any accounts that may have been excluded.
I am trying to find a way in Excel 2007 to convert the date from US format to UK format, I tried to change it by using [right click=>Format cell=>Select Date=>Select the first option in Type:*14-03-01=>OK], but I doesn't work , the attached file are presenting the date in US format.
View 10 Replies View RelatedIs it possible to conditional format cells with formulas in Excel 2007. It used to be possible in Excel 2003 but I'm struggling to find this in the new version.
View 6 Replies View RelatedI am using someone else's old spreadsheet.
This spreadsheet uses a custom format of ##-##-## for a date such as 012214 prints as 1-22-14.
I need to convert this into normal short date format such as 3/24/2014 because there are four columns of dates in the spreadsheet and we have to do some addition and subtraction from one column to another.
I am using Excel 2007.
In Column D of my work book are a list of months, I'm trying to use conditional formatting to do the following:
Highlight green the cells in Column D where the month is due (i.e the month is now).
Highlight orange the cells that are one month passed the due month.
Highlight red the cells that are two or more months passed the due month.
I'm using Excel 2007.
i have put a small extract from list of 50000 values. I have Figures which are pasted as values on top and on A column but they do not agree unless i F2+enter on each figure on Column A that would mean 50000+ enteries.. i have tried copying column A and row 1 and pasting it as value but still no change. Row 1 header figures are typed manually.
View 2 Replies View RelatedI´m having aproblem with Excel 2007 about Conditional Formatting. I have a row of Dates for example 02-01-2009 03-01-2009 04-01-2009 , etc in different columns.
Then what I want to do is use Conditional Formatting to Format cells on several rows below according to the day (if its weekend paint red, if not, dont do anything). I'm using the "Use a formula to determine which cells to format" and the condition is (supposing the cells with dates are A1 to C1)
=WEEKDAY(A1:C1) > 5 .
So with those 3 dates provided lets suppose Januar2nd is not a weekday, so the outputIwant is: Red White White, (Next Row) Red White White, etc for several rows.
Now what I think is not right is it only works for the row in which I have the cursor so its like: (Lets imagine I selected 3 rows on which I want to see that output) Red White White (The row in which the cursor is works fine), but the next row goes Red Red Red and the third the same.
I select the date from drop down calendar in excel and linked with one cell. when i use the date in vlookup formula it does not work due to linked cell date format.
View 14 Replies View RelatedI have been using code to save a collection of my reports in html format that has work very well until I was forced into using Vista and office 2007. Here is a snippet of the code that no longer works - at least I suspect this is the main problem.
View 4 Replies View RelatedExcel 2007 Textbox changes LinkedCell Cell format to Text. If I do a VLOOKUP on that cell it fails and I have to "Convert to number".
My application is to enter a ZIPCODE into ZIP textbox, then for CITY and STATE to autofill using VLOOKUP in both CITY and STATE cells.
I have a file which included monetary amounts in many currencies, which appear in Excel 2007 as:
232.44 EUR
103,796.10 CZK
18,071.08 PHP
I need to use the value and currency code, but unfortunately the currency code is part of the cell format (so I can't use, say =right(3) to grab it.
The cell format is set to: #,##0.00 "EUR" , with each cell set according to the currency within.
Of course I will be going back to the source to see what I can do to get something more useful directly, but is there any way I can grab the currency code so I can use it ?
I have phone number in phone format which looks like this: (123) 456-7890 which needs to be converted to: 1234567890.
I tried but unable to do so.
I'm attempting something that I feel should be relatively easy using the conditional formatting icon sets (3 arrows coloured)
I have values in columns A and B. I simply want to compare the value in column B against that in A, and format column B accordingly
B > A (green arrow)
B = A (amber arrow)
B < A (red arrow)
The icon set rules only allow for > or >= conditions, and I can't get the desired results using the rules.
A
B
B (with conditional formatting)
1
10
20
Green arrow (increase)
2
20
20
Amber arrow (no change)
3
15
5
Red arrow (decrease)
4
Excel 2007.
I have a question about conversion of a text format into date format.
2 computers, the first windows vista, the second Windows 8, both Excel 2007.
The purpose is to calculate the difference between 2 dates with hour:minutes:seconds, like for example:
18/12/2012 19:20:00 and 18/12/2012 19:23:03.
So in this example the result should be 00:03:03.
Both dates are formatted with 'personalized' : dd/mm/yyyy hh/mm.
In the first computer everything works like it should, but in the second it is apparently impossible to transform the first of those date h:m:s which is originally in a text format into a date format. I tried all the methods which i found to transform a text date format into a date , like multiplication with 1, Datevalue and others, but nothing seems to work, the result is always "#Value".
I can run this code successfully:
Code:
With ActiveSheet.ChartObjects("Chart 2").Chart
.Axes(xlCategory).TickLabels.Font.Size = 20
End With
But this code throws a "This Object Is No Longer Valid" error when it gets to the first .Axes line:
Code:
Sub ChartFormat()
'
' Format Charts macro
'
Dim ch As ChartObject
For Each ch In ActiveWorkbook.Sheets("Summary").ChartObjects
With ch.Chart
.Axes(xlCategory).TickLabels.Font.Size = 16
[Code] .......
I'm using Excel 2007.
