Reading A .txt File In Excel VBA
Jul 5, 2008
I need a little bit of help here ... I can read and process a .txt file from my Excel VBA program, but I am having trouble as follows :
The file I am reading contains a number of heading lines, followed by a number of data lines.
All of the data lines end in a date, so I can use the code ...
If IsNumeric(Right(MyDSRec, 1)) Then
... to pick up the data lines & ignore the heading lines. This is fine and works perfectly.
However, the .txt file that I receive is out of my control, and is prone to error, in that the data line occasionally has what I assume is a "Tab" character after the last date, which means that the line above does not recognise the last character as being numeric.
If you double click "06" at the end of each line on the example below, you should be able to see what I mean (in the .txt document, if I place the cursor at the end and press backspace, all characters at the end are deleted, back to the 06, so they are not individual spaces) ...
RAMSEY1129/0503/0603/0613/06
SHAKESPEARE 1102/0609/0609/0618/06
PREMIER603/0604/0605/0618/06
View 9 Replies
ADVERTISEMENT
Jun 16, 2006
I am running into one of the strangest issues I have seen in a long time. I have a user defined type that I utilize in VB6 and write out to a binary file....
View 7 Replies
View Related
Apr 4, 2007
i am trying to read the file name in a specific folder through macro of my EXCEL application. i wondered that it is reading that file name in all Lower case.
Ex: the file name in the folder is "Ford of Pompano.xls" when i am reading that name from macro, it is giving me as "ford of pompano.xls". Do i need to change any default settings in EXCEL so that it can read the files names what ever is presend in the folder
View 3 Replies
View Related
Jan 7, 2010
I have a .csv file that contains numerical data in the form of strings, much of which starts with leading zeros (i.e. "012345"). I double checked to make sure the .csv file has the leading zeros and that they are wrapped in quotation marks in notepad, and it does. However, when Excel opens the file, it must read those strings as numbers, becuase it chops off the zeros. Does anyone know of way to fix this? Can Excel read numbers as strings straight from a .csv file?
View 3 Replies
View Related
Apr 8, 2009
I am running a DOS command to create a directory listing of ONLY DIR files with the short dos filenames and the long filenames. The command used is
DIR /A:D /X /N /S > c:sampledata.txt
Once read into excel, I simply want to have a spreadsheet with the following:
Directory Path Name, DIR Short Name, DIR Long Name
Anyone have some code to already do this? I have attached the sampledata.txt file to go with the pseudo code.
View 9 Replies
View Related
Dec 23, 2008
I want to read in a space delimited file and to put each line in one cell starting with cell B2 (I will take care of splitting it into columns later). However, rather than reading one line at a time, it reads in the entire txt file at the first pass......
View 5 Replies
View Related
Jul 7, 2008
I would like to read a few custom properties of excel workbook, even if they are close.
My intention is to build a list of compatible workbooks.
The compatibility woul be determined fom a custom property.
How can I read a custom property from a file wothout opening it?
View 9 Replies
View Related
Jun 19, 2006
when i run this code under a button on a sheet it works fine. but i would like to run when the workbook opens (but i get an error message
On Error Resume Next
Application. ScreenUpdating = False
Dim wb As Workbook
Dim ws As Worksheet
'create new work order number...
Set wb = Application.Workbooks.Open("c: empex_ExternalOrderNumber.xls")
Set ws = Worksheets("NumberIncrement")
'get new WO number from numberincrement.xls
If Err.Number <> 0 Then
MsgBox Err.Description & "...help"
Else
mynewnumber = ws. Range("b1").Value
Range("g5").Value = mynewnumber
wb.Close
End If
Application.ScreenUpdating = True
View 2 Replies
View Related
Dec 11, 2012
When I download data from server side into excel, specific number such as "83437E207" gets converted into scientific number such as "8.3437E+211".
Is there a way to format excel to always to read numeric data as numbers only.
View 7 Replies
View Related
Sep 17, 2012
I need to find a way to collect current CPU usage of a specific application on a remote server or the top applications that are using the most of the processor's time on a remote server?
View 7 Replies
View Related
Jun 17, 2013
I have to excel files
1. Temperature & Humidity Reading
2. Summary
I tried to copy a date from Temperature & Humidity Reading file using the formula ='[Temperature & Humidity Reading.xlsx]Sensor 7'!$C$2 to Summary file
if the date format is like this 6/10/2013 12:00:00 AM the result is fine, but when i try to copy that formula for the succeeding dates the results is same from what i copied.
View 4 Replies
View Related
Oct 10, 2011
VBA coding for automatically saving an excel file as another file using the current date as part of the file name together with "32ga" as a constant add-in. I also what this macro to run at a particular time of the day let say 00:20hrs. The excel file i want to save as is always open . It has data that changes every 24-hrs.
View 1 Replies
View Related
May 31, 2013
loop and range function to apply in the below code through which I can avoid writing code for all the rows.
I am trying to open excel files located in single folder from files name (along with the path) in single worksheet (Column B and Row 1 to 500).
I have created follwing code which opens the file and then runs a macro in it.
a Sub Test()
Dim strFName As String
strFName = Sheet1.Range("B2").Value
[Code].....
View 4 Replies
View Related
Jun 4, 2012
Is it possible to write vba code that will generate a text file with ALL changes that were made to an excel file. Ex. If Cell A17 = "Monday, June 4, 2012" and a user updates Cell A17 to "N/A", I would like to know what the value was before and after the udpate was made.
View 8 Replies
View Related
Jun 3, 2009
I have a workbook with many spreadsheet named Sheet1, Sheet2 and so on. Each sheet is filled completely upto 65536 rows. This data is being picked up from a CSV file. In this file there are sites with each site there is a assciated set of data. What happens is the data that extracts data does not differntiate between sites and when it reaches to the end of worksheet it splits the data into next sheet. So I am trying to create a macro to check each spreadsheet starting with the last sheet in the work book for example last sheet in the workbook is seven it should go to sheet6 and if there is a blank row after row 64000 it should cut all the rows and move them to sheet7. Then it should goto sheet5 and do the same and keep on doing it until it reaches sheet1.
View 9 Replies
View Related
Jan 27, 2014
A co-worker of mine is exporting files from Quickpen as excel files, but every time he names the files with any Uppercase letters in the files name, they are automatically changing to all lower case. Even when he tries to rename the files, they will not stay with any uppercase letters....I have searched all over and cannot find a solution. If he sends ME the file, I can open it in excel and save it with any cases.
View 2 Replies
View Related
Feb 25, 2014
I have a macro enabled file with some functions. Now I want to create a fillable pdf file from this file.
I am able to create a pdf file from Excel 2007, but not able to make a fillable one
View 1 Replies
View Related
Feb 11, 2014
I need a VB code to open excel files located in a path (fixed path) by providing a part of file name through a input box
for ex: I have some files located in my local drive as below
1. colurgreen.xls
2. colurred.xls
3. colurblue.xls
I need a input box asking for file name and I input "green" or "red" or"blue" and it should open the resp file.
View 4 Replies
View Related
Oct 22, 2013
I have a macro-enabled template file in Excel 2007. I would like the user to be unable to save in any format other than macro-enabled. They should be free to choose a path and filename, but not the file type.
I presume this means some VBA code in the before save event, but I don't know what.
View 2 Replies
View Related
May 20, 2013
I have a macro that takes a text file as input and produces an excel file as output. I want a macro to store the name of the text file in a variable (without its file extension).
View 1 Replies
View Related
Apr 24, 2014
I need to open an excel file based on a date mentioned in the file name, but minus 1 day. The file name is composed with Statistics_date_time.xls
Example: statistics_20140423_142754.xls
Once I need to open the file (only in the mornings), it has to be the one from the previous day to see the yesterdays performance. How can I create a macro that will look at the date in the file and take the one from yesterday?
This will be a part of a macro I'm making. The rest of the macro will just format the file and combine a few ones from different departments.
View 4 Replies
View Related
May 16, 2014
Using Excel 2010
As I am looping through files in a folder, I would like to determine if the file is a text file.
The problem is that all extensions are variable in a pattern such as .078, .051, etc.
In this instance, the extensions are numeric, but I'm trying to figure out a way to handle that is all encompassing to include *.txt, *.tsv, *.csv, *.prn, etc......
How can I handle these efficiently?
View 6 Replies
View Related
Aug 16, 2014
I want to know how to convert XML file into excel.
I know using wizard method, if i use that table format alignment will be differing.
i required data should be in regular format.
i enclosed a file with flow.
xml file is not uploading so i written script in one sheet..
View 4 Replies
View Related
Apr 19, 2008
converting to a text file from Excel.
The below code worked in 2003, but now I have put it in 2007 with just a change in the Range to work with.
What I'm getting is a Text file with, for lack of a better term, hyroglifics (sp).
Not the numbers that I should get like I got in 2003....
View 9 Replies
View Related
Nov 25, 2013
I have defined a name for a data range in an excel file. Now I want to use the same name in different excel file. I tried through various sources but not sure how to do that. Current Soln: I am copying the data from the source file and re-defining the names for the range. But this seems to be duplicate and creates unnecessary space.
View 3 Replies
View Related
Nov 13, 2009
I'm using the following code to read in any number of CSV files into a single worksheet and concatenating them together
View 2 Replies
View Related
Mar 4, 2010
I'm trying to write code that looks at the range W(rowid):Z(rowid) and lists each cell value in a listbox. The row id is coming from the listindex of combobox1. I know the rowid part is correct and working because other operations in my worksheet are using it fine. Here's what I've written so far:
With Worksheets("DATA")
For I = 0 To 4
ListBox3.AddItem .Range("W" + I & rowid)
Next I
End With
View 9 Replies
View Related
Jul 17, 2014
In sheet 1 data 123. In sheet2 there is also data 123. In sheet3 will automatically data that is same 123 after reading sheet1 & sheet2. Any data with figure that is same in sheet1 and sheet2 will be reading in sheet3.
View 4 Replies
View Related
Dec 1, 2008
the attached workbook, I am looking for M19, N19 & O19 to read from different locations depending on how many cells are called on when info is entered in P8.
View 10 Replies
View Related
Feb 6, 2014
I want to read all the folders names in a folder.
So for example c:win estfolder
And in test folder there are 5 more folders named test1,test2 etc.
I want to be able to give the path c:win estfolder and let VBA excel read all the names of the folders inside the folder testfolder.
I have found some methodes on the web, but those are for files like .txt etc.
View 3 Replies
View Related
