I have a list of about 200 companies in column a. Columns B, C, D, E, etc. list revenues for 2005, 2006, 2007, etc. The problem is not all of the years have values. Is there a way to filter out the companies that have a blank cell for any of the years? For example, if company 1 has a blank in 2007 can I filter it out, even if all of the rest of the revenues are filled in?
View 2 Repliesi have created a spreadsheet to simplify our work flow, I am stuck on what is probably the easiest of the commands.
basically have rows dedicated to specific codes and the colums represent values relating to each code, all codes have a different set of values, the attached example only has a few variables but the actual worksheet will have several hundred.
the idea is the user will input the code they wish to get details on in A2 and then press the command button and it will then show (as per the after sheet in the attachment) just the relevant information for that code, so filter the code in column A and hide the columns which hold no value.
where i am getting stuck is I am not sure the best way to proceed, is it best to create the macro button to do the filter and hide or is there a better way using vlookup and a pop up window asking for the relevantcode to be inputted to to retrive the information, again understand there will be hundreds of colums and hundreds of rows and the values may be 20 or 30 colums apart for some of the Codes so this simplification is really saving the user a lot of time.
I am attempting to hide a series of rows based on if the cells in that row are blank. The catch is that the field of data in the column may vary as follows:
D E F G
x x X x
x X x
x
I would like to eliminate all the rows past the last X value in Column D for example
Below is the code I am attempting to use
Rows("41:60").Select
ActiveWindow.ScrollRow = 41
ActiveWindow.ScrollRow = 42
[Code].....
How can I FILTER a range and display the unique items, one below the other, WITHOUT blank cells - with only a FORMULA. What I came up with is shown in the attached WB. I would like to present the countries like in C11:C15.
View 5 Replies View RelatedI have a parts index containing 500+ rows of data, I also have multiple columns in which I can sort the data.
I would like to have a button fixed in cell C4, D4, E4, etc... row 4 is the header, that when clicked, will filter all rows that have a selection (non-blanks) for only that column. So If I have data in various rows & column (C5:F500) that when I click on the button in cell D4, only the data listed in the various rows of D5:D500 are shown and columns C, E & F are hidden. Clicking cell D4 will show all data.
I can create the button so that it is sized specific to the cell and follows the cell sizing and I can create a button to filter only columns D or E or F, etc... but that means that each button is a separate VBA, macro.
A while ago I found a VBA code that allowed me to sort rows Asending/Desending depending on which button in which column was clicked... See inset: and this allowed me to add columns without changing the code. So I think If I can modify this code this will work great for me..
Sub SortTable()
'code written by Dave Peterson 2005-10-22
'2006-08-06 updated to accommodate hidden or filtered rows
Dim myTable As Range
Dim myColToSort As Long
Dim curWks As Worksheet
Dim mySortOrder As Long
Dim FirstRow As Long
Dim TopRow As Long
Dim LastRow As Long
Dim iCol As Integer
Dim strCol As String
Dim rng As Range
Dim rngF As Range
I need to hide rows based on a cell value. In cell B4 I list how many students are in period one.
I have enough rows for 35 students found in A10:A44. In C10: C44 I listed numbers 1-35.
So I need any row that has a number in the C column higher than what was entered in B4 to be hidden, but when cell B4 changes I need rows to unhide if their row is less than new value.
So here was my attempt: ...
I have a worksheet used for inventory. In Column A is the quantity (to be entered manually). In Column B is the product description. In Column C is the price of the product, and Column D the total price (column C price x the quantity entered in Column A). At the bottom of the worksheet is a grand total. Also, Column B (products) is grouped into subheadings by the supplier each product came from (for example, row 6 has the title PPG, and then rows 7-137 list every product from PPG).
The calculations in this worksheet work fine. What I am trying to do is, using a macro once all of the appropriate quantities are entered in column A, automatically hide every row of product that does not have a quantity. The tricky part is, if no products under a given supplier subheader are entered, the subheader also hides, and if a quantity is entered, that subheader shows. For example, if I have no quantities under any products for PPG, then the PPG subheader hides, but if just one quantity is added, PPG shows. Also, this list will be constantly updated, new products will be put in and taken out all of the time, so I cannot base the macro on a specific number of rows.
I have two spreadsheets. Spreadsheet B reads from the master. No entries are made on spreadsheet B, it is visual only. Changes are made only on the master. I want to create a Macro where all blank lines are filtered out automatically on spreadsheet B, in effect only lines with values are displayed.
Once a new task is created, the details are typed into the master spreadsheet and spreadsheet B, located in another building, is automatically updated to display the details. Once the task is completed which can be seconds, minutes or hours later, an "x" is placed in column A of the master. I have formulated spreadsheet B is "" all rows where "x" is listed in the master. Towards the end of the day however, I can have 50 visable entries on spreadsheet B spread over 500 rows.
I want spreadsheet B to display only active tasks from the top of the page down. I currently have those that read the spreadsheet filter out blank rows. Because tasks can be updated at a rate of 10 - 15 per minute with new tasks and the completion of old, I want to eliminate the need for our employees to have to filter themselves.
How do I go about writing VBA code to do the following:
1. Select a particular range of cells in column A
2. If one of these cells (in column A) returns a FALSE response to the Excel IsNonText formula to hide its entire row.
The circumstance is a little difficult to explain but let me know if you need clarification and I'll do my best.
So I have a pivot table of about 2000 rows with data on employees.
In the table, there is a field associating each employee with a location (midwest, southeast,where ever) and I have a report filter on it that lets me view only people from a given region.
It was working fine, but I'm doing a lot of VBA macro related to the pivot, and I think I somehow changed a setting somewhere in the process and don't know how to reverse it.
When I apply the filter now, it only shows data for people in the region i choose, except it still shows all the other lines that should be hidden, just with no values. Here is a crude visual
Name region sales
Jim_____MW__10
Henry___MW__34
Jerry____SW__20
Aaron___SW__44
Scot____MW__22
AFTER FILTER for "MW"
Jim_____MW__10
Henry___MW__34
Jerry________0
Aaron_______0
Scot____MW__22
(jerry and aaron should not be visible at all)
I am developing a spreadsheet that, once all the code is run has numerous sheets added. On these sheets I have a significant number of rows that contain no data and could be hidden (I dont want to remove them, because later I need to re- import all these rows back to my master sheet). I tried code I found in the forum to hide a row if it is empty but this doesnt work as some of the cells contain formulaes referencing back to another sheet that is hidden.
I am trying, and failing, to write code to hide a row that contains no actual data, but still has formulas in some of the cells.
Can't seem to find a solution searching through various forums searches. I would like to hide all blank rows within a Named Range : Range1 (A1:E8).............
View 4 Replies View RelatedI have this code (compliments of VBA Noob) which hides all blank rows within a range ("Range1") P16:V650. It works great in a new worksheet with little amount data, however within my heavy worksheet, it takes over a minute to compile.
View 2 Replies View RelatedI am struggling to come up with a vba code that allows me to search column B, Rows 21:89 for blanks then hide/unhide the associated row. I would like it to be one macro so that I don't have to have two buttons on the sheet to hide/unhide.
View 5 Replies View RelatedI have a lengthy column containing text information. Within this column are various gaps. ie: several cells with no information.
eg:
..... Row F
1...text info
2...text info
3
4
5...text info
6...text info
7
8...text info
I would like to create a simple macro (switched via toggle switch) whereby it hides/unhides the rows containing cells with no text information.
It should also be mentioned that this column contains various background color formatting, for both empty and text cells.
I received this code which hides blank rows within a range.
View 12 Replies View RelatedI'm trying to create a table that adjusts dynamically to how many cells in a row have text in them. In other words, when a cell is left blank, the entire row should not appear in the table.
I've tried the following code:
Sub test()
Dim i As Integer
Dim nrrows As Integer
[Code]....
When I run this code, it hides all rows, even the ones that aren't blank. why this might happen and how I can make it work?
Hide Multiple rows. I have text within two columns A, D. How can I Hide Blank rows which spans two column Named Ranges, "Range1" (A1:A15) "Range2" (D1:D15). As an example:
Beginning with this:
...A......D
1.Text
2........Text
3.
4.
5.
6.Text
7.Text
8.
9.
10.......Text
11.Text
12.
13.......Text
14.
15.......Text
To this , after hiding blanks:
...A......D
1.Text
2........Text
6.Text
7.Text
10.......Text
11.Text
13.......Text
15.......Text
What I have is a sheet where the cells in range A9:A3508 have a formula that evaluates to blank if any of a variety of conditions are not met (date falls outside desired range, does not meet filter criteria, etc.) and a number if these conditions are met. What I am looking for is for all rows in that range where A is blank to be hidden (not deleted), and for this to automatically update every time A changes (meaning that if A goes from blank to a number, that I will need that row to become unhidden again). I have considered just recording the macro and calling the function with a button, but as this is for external users, some of whom may be unfamiliar with Excel, I would rather keep it as clean, simple, and automatic as possible.
View 5 Replies View RelatedI have a spreadsheet that is linked to another spreadsheet in a workbook. The information comes from an export of an access query into a template in excel that I am using just to store the values, then I link the values to the appropriate field in another sheet. I was wondering is there a way to programmatically hide blank rows in this sheet starting at a specific row of the page.
View 4 Replies View RelatedHow do you select certain ranges in the same column to filter? The ranges I need are "c36:c50" & "c54:c68" & "c72:c87" & "c91:c155" & "c158:c172" & "c176:c202" all filtering for blanks. I can not filter from c36:c202 because there are blanks in the missing rows and they have to stay.
View 7 Replies View RelatedI have a worksheet which shows multiple tests and whether they are completed or not[code]Test 1 Person1 Test 2 Person2 Test 3...Person12. I want to search for a specific test, e.g. pH which could be in any of the "Test" columns but only return it if it is not completed. The "Person" columns will be blank if no one completed the test.
I set up the Advanced Filter criteria with all the appropriately labeled columns and for the Person columns, I put ="" but it is returning all rows which have pH in them whether they are completed or not. What should I be putting in the Person columns of the criteria to only return those rows which have the pH test but it is not completed. I attached an example of the criteria range and the filter window to help clarify (the full spreadsheet is huge)
I have a worksheet that contains 15 instances of a repeated table over 700 rows. Each table is 45 rows in size and is housed in between the natural page breaks in the spreadsheet.
These tables are populated from data form another worksheet but may not all be used (8 out of the 15 may be used but will always start from table 1 and there will be no missed tables).
In the very top right of the table is a cell value that is only displayed if the table is in use, so will be blank if not used.
Code that will hide multiple rows (45) based on a cell value being blank.
I found this in my search, offered by the brilliant Roy UK:
This will hide all rows that have blank cells in C or D ...
how to get a selective cell range after i apply a filter,
I have it currently that it will copy the data shown but i don't want it to copy if there is no data present?.
ub Ding*****urn()
' Ding*****urn Macro
Sheets("Master").Select
Range("D1:E1").Select
Selection.AutoFilter
ActiveSheet.Range("$D$1:$E$800").AutoFilter Field:=1, Criteria1:= _
"DINGLES BOURNEMOUTH"
ActiveSheet.Range("$D$1:$E$800").AutoFilter Field:=2, Criteria1:="MENSWEAR"
Range("A2").Select
[code]....
when i comes to the selection i only want it to copy cells that represent a value within that filter not cells that are blank?
I have a file with four columns of data that represent quarterly figures. I would like to hide the entire row if all four quarters are blank. The cells I need to check are P, Q, R & S and the data begins with row 21. I know how to get the last row in the range.
View 5 Replies View RelatedThis is a sort-of bizarre query I have.
I have a large array of data which I'm filtering out and copying to a new spreadsheet using an advanced filter. I have 2 filter criteria, one works... the other doesn't.
The second criteria is supposed to filter out rows that have blank cells in column C or D. I tried various things:
a. at first I tried following:
Column header: Name |Surname
Criteria: <>"" |<>""
b. since it didn't work I tried that
Column header: Name |Surname
Criteria: =<>""""" |=<>"""""
I also tried <>0 and <>null with absolutely no joy.
c. once I figured out that doesn't work either, I tried:
Column header: (empty)
Criteria: =OR(NOT(ISBLANK(C2)),NOT(ISBLANK(D2)))
now, the last one did have some effect, most of the empty-celled rows have been filtered out. However the filter persistently picks up ONE row that has blanks in column C2 and D2. I checked the data to check if the cell is really blank and it's as blank as it gets.
Obviously, I need help. It's been 3 days and I still can't figure out what's wrong with my filter. Is there a way of fool proofing the criteria, so that it will filter out all cells that are or appear to blank?
Is it possible to use an advance filter to detect blank cells? Or can the criteria be set to detect all cells that don't contain a letter e.g. "Y"?
View 3 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
Im using an advanced filter that uses the following criteria
Days Late Note(s) Note(s)
>90 <>*agreement* <>*QTR*
This shows all data over 90 that do not incl the words agreement or QTR in a column marked Note(s).
My problem is that I do not want to show records that are Null in the Note(s) column.
Note(s)
<> Does not work (possibly because it is text and not Numbers)
as this does work if used on records that contain numbers.