Filter Using Multiple Criteria
Nov 18, 2013
I have a Excel sheet which has a Product type values ASP,VSP etc in the first column. The second column has values Product Sub Types,which has values abc123, abc123456,abc123789, def123,def123456,def123789.The third column ServId's abc01,abc02,def01,def02.
If the Product Type is ASP,then I need values abc123,def123
But if Product Type is VSP, then I need values abc123
abc123456;abc123789
def123
def123456;def123789
View 4 Replies
ADVERTISEMENT
Jun 13, 2007
I have a dataset, which I would like to sort on multiple criteria. The code I have is :
Dim Lst As Long
Dim Hdr As Range
Lst = Range("A65536").End(xlUp).Row
Set Hdr = Range("A6:AD" & Lst)
With Hdr
.AutoFilter
.AutoFilter Field:=9, Criteria1:="Complete" 'Match Status
.AutoFilter Field:=14, Criteria1:=Array ("Pending", "Technical", "PR", "Regional", "=") 'Case Study Status
End With
Field 9 Match Status will always be Criteria "Complete"
Field 14 may contain different variables depending on the dataset. I want the filter to bring back all Match Statuses (Field 9) "Complete" and multiple Case Study Statuses in Field 14.
This code filters correctly on Field 9, but is only bringing back blank cells in Field 9 when there is data that has Case Study Status "Pending", "Regional" and "Blank".
View 9 Replies
View Related
Jun 18, 2008
I am trying to run a macro to filter data based on 3 criteria. i want to filter column c to show rows with "Application", "Application / Web", and "Application / Database" which is referenced in the criteria range stated below.... Sheets(" Validation").Range("D95:D97"). for some reason it does'nt pick up the answers when i know that they exist in column c. could it be that they are formulas populating column c?
Sub Macro3()
Range("c4:c200").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Sheets("Validation").Range("D95:D97")
End Sub
View 3 Replies
View Related
Apr 21, 2014
i have my "raw data" and in my "summary" sheet, i want to show the data by the data that is filter in range D15:D21
Essentially, when the user filters the data from cell D15, i want the the macro to paste the data row D27 down/across from the "raw data" table. in addition, i am not sure how to create dependent drop down.
for example, in cell D15 it shows "segment"; in the cell below, D16 (tyre size), i want it to list all tyre sizes within that selected "segment"; when i want D17, to show "speed index" for by segment and tyre size etc.
in the table, i want the macro to show the data based on what the user filters from above. i can then do my calculations but getting this to work is the tricky part.
View 14 Replies
View Related
Mar 5, 2014
Can I use vba advancedfilter to work with more than one criteria?
I presently have one range designated. At the top cell has the field, or column, header name being "Student", then followed by a list of 6 people, located in Sheets("Extract").Range("A1:A7"), which is then extracted from Sheets("Complete").Range("tblPrimary[#ALL]") to Sheets("Extract").Range("AA1") as in:
[Code] ......
I want to also be able to filter out a specific month, whose field/column name just happens to be "Month", but I suspect I will need to change it to "InfoMonth" or the like to avoid the probable key word of "Month"...
The months are numerical in those fields - 1 through 12.
Can I add to the present filtering line or do I need to then create an additional filter?
View 6 Replies
View Related
Oct 21, 2008
I have a range of data (up to 20,000 cells) that has up to 30 different entries. I need to apply a filter to this data to filter out all but 5 of these.
View 5 Replies
View Related
Feb 7, 2012
I have a list of farmers in A1:A1000 with the types of livestock they keep in col B, delimited with commas and spaces e.g:
Col A Col B
Name Animals
Smith Cows, Pigs, Sheep, Horses
Jones Sheep, Pigs, Chickens, Geese, Alpaccas
Price Cows, Sheep, Pigs, Chickens, Rabbits
Williams Cows, Chickens, Horses, Alpaccas, Pigs
I need to be able to filter this list using up to 3 criteria, e.g. Filter all farmers with Cows, AND Sheep, AND Pigs. Applying this to the data above would show Smith and Price.
The user would need to enter the criteria somewhere, preferably in 3 cells, let's say D1, D2, & D3. I reckon I need to use Advanced Filter, but not sure how to do it with all the animal types to be filtered being in one column.
View 2 Replies
View Related
Sep 25, 2007
I currently use this filter to display rows with exact values as shown in this example:
Sub New_SheetUnpaidInvoices()
Application.DisplayAlerts = True
Worksheets("Closed Yr. 07").Activate
Columns("S:S").Select
Selection.AutoFilter
ActiveSheet. Range("$S$1:$S$1127").AutoFilter Field:=1, Criteria1:= Array( _
"BOB JONES", "JIMMY SMITH", "SUSAN LEE", "JONES SMITH LEE"), Operator:=xlFilterValues
End Sub
Sometimes, however, the worksheet cells contain simply combinations of last names like "JONES SMITH LEE" or other combinations. And, the last names appear in random order. So, I'd like to able to filter all rows that contain portions of the string without having to worry about the order and the exact string, etc. If the autofilter can return rows anytime it finds Jones, Smith or Lee regardless of order, that's be great.
View 7 Replies
View Related
Sep 25, 2008
I'm trying to use the advance filter for multiple criteria in one column. It works fine if the criteria is ="*10*" (ie where the cell in the range has 10 in the string) plus other = criteria. What I cannot get to work is where the range doesn't equal 10 in the string. I've tried ="<>*10*" and other variations to no joy.
View 4 Replies
View Related
Sep 15, 2008
I need to filter out data which displays only a few categories of information at the same time in the same column. For example, column A: David, Susan and William. After filtering the data, it will show David, Susan and william information. I have tried custom filter, but it only allows 2 conditions. I need to show more than 2 conditions of data. I have tried working out using office assistant guide on Multiple Criteria in one column to no avail. Only shows a single cell.
View 9 Replies
View Related
Mar 19, 2007
Example attached. I need to filter rows based on a start date and stop date, columns C and D. So for example the filter date is 01Mar07 (located in A5). As this date in this cell is changed the rows are filtered accordingly. I need to filter rows so that any row with a start date which includes Mar 07 is shown and I need to include all rows that have an end date in Mar 07. This would result in the inclusion of an event that started in Feb and Ends in march being displayed.
Additionally, I would need to clear the filter. I'm just starting out, I'm sure this is easy for you all the excel experts., and you may probably have a better method to approach this.
View 2 Replies
View Related
Jan 16, 2014
I have a line that is commented out in the bottom - that is an example of what types of filters I want to do but dynamically. Users choose multiselection from a list box then it filters the sheet for them. It is pulling the data from the listboxes but when it is more than one item it is Putting the whole thing in as if I said text = "ABERTI", "AMALON", "BCASTE", "BGELLE", "CFRANC" - No I want to filter by each of these (it believes this is one long string)
Here is the code:
[Code]....
This code does not filter correctly.
View 2 Replies
View Related
Sep 27, 2008
I have a spreadsheet with multiple columns. The first column defines a "route", and the next two list "start" and "end" cities for that route. The fourth column lists the length of each route. There are only a limited number of cities, so the same entries appear in both "start" and "end" several times. I would like to use Autofilter to sort the list for every appearance of a given entry in either "start" or "end". Is there a way to make Autofilter sort mutiple columns simultaneously?
I could achieve the desired end result with Advanced Filter, but I want something with the ease-of-use and immediate update/response of Autofilter. Advanced Filter requires explanation (as well as lots of clicking and typing) whereas Autofilter is self-evident. I also want to avoid VBA Macros as they are not well-understood by the users who will use this spreadsheet (and any VBA Macro will require very specific input to work properly.) Is it possible to do what I want? Or is Advanced Filter / VBA the only way to do it?
View 2 Replies
View Related
Jan 29, 2009
I'm trying to create a formula (used in sheet 2 column B) that would generate the results in sheet2.B based on the contents of sheet 1. sheet2.B2 would contain a formula searching for the both "Y" in sheet1.C and the text in sheet2.A2 (in this case "E&P"). When each match is found, the contents of sheet1.A should be returned to sheet2.B, as shown in the mockup. There will be multiple matches (at least 15-20) for each search criteria, and I don't know how many there will be ahead of time.
I've tried various formulas, and they either have incorrect syntax and return every row in a range, or only return the first match correct match each time instead of all correct matches. I found some UDFs posted online that claim to do this, but I've gotten them into the spreadsheet and they generate # NUM errors. I would prefer to work with Excel-native formulas if possible, because I'm going to eventually hand this off to someone else to maintain and they may not have the level of expertise to deal with UDFs.
View 4 Replies
View Related
Mar 8, 2014
I have a very large table and i need to be able to Hide/show specific ranges based on:
Filter +and+ specific cell values in columns
brief example of the table : tablee.png
So...
1. Filter Column "B" (in this case we select "HELPING")
2. Auto hide/show collumns. - IF "C1" = "Required" THAN Show "C:E", IF "C1" ="N/A" , HIDE "C:E" and so on for every column like above.
There are over 80 columns like the "C:E" range. and I only need to show those that are "Required".
View 1 Replies
View Related
Jun 28, 2014
I'm working with many rows of data (500,000+) and many columns. To simplify my question, I'm going to provide a simple example using made up numbers and only the columns I'm concerned with.
BillT Doc.ItemQty
F11231012.00
F2123205.00
S1123105.00
RE321202.00
F2321108.00
F2321201.00
RE321203.00
RE999808.00
F27771001.00
RE7771001.00
I am trying to remove the docs that have two Bill types that cancel each other out, where the qtys match and highlight the rows where the qtys don't match. The macro needs to have the positive and negative bill types programatically entered, where for example F1 and F2 are positive and S1 and RE are negative. Keep in mind the data may not necessarily be in order as it is above.
So for example with data above, the rows for doc 777 would be removed completely because the item numbers are the same, the qty is the same, and the bill types oppose each other. Doc 123 and Item 10 lines should be highlighted since their bill types are opposed bu their qtys don't match.
I hope this makes sense. I tired to achieve this using multiple loops and arrays, but ran out of memory when working with the entire set of data. I'm assuming their must be a better way to do this, I'm hoping some of the intelligent individuals here will be able to point in the right direction.
View 8 Replies
View Related
May 1, 2014
I found a great bit of Advanced Filter code that works great, and fixed a problem of clearing a cell breaking the filter.
But if I want to increase the criteria from 1 row to 2, so you can start to include And , Or operations, it breaks the filter. Even an attempt at a manual one fails, until you put the criteria range back down to one row, then it's fine again.
I've tried changing the Target Row to >2 but that didn't work. how to make the criteria range bigger, and no problems of breakage if you clear the cells? It makes for a very useful automated Advanced Filter.
Here's the code :
[Code] .....
Database = the named area of raw data.
DATA is the name of the raw data worksheet
The criteria range should be AZ1:BC3, but of course royally breaks it...
View 4 Replies
View Related
Apr 1, 2014
Is there a way to provide filter with a list of criteria but when it doesnt match all of the criteria it still uses the filter on the criteria that it does match?
E.g i have this code
ActiveSheet.Range("$A$7:$N$31997").AutoFilter Field:=1, Criteria1:=Array( _
"A", "B", "D", "E", "H", "I", "R"), Operator:=xlFilterValues
However sometimes for example B will be missing, or H or B H I will be missing etc... is there a way to provide all of the criteria and it will not error if the criteria is not all there?
View 1 Replies
View Related
Dec 12, 2009
I have a filter and need 2 (two) criteria.
1) In a (long) list of dates I need to see only the last month
2) From that selection (last month) I need to filter a date.
Note: I would like the filter to only show the last month as the list becomes very long.
Current solution
Column A has all the dates
Column B is a copy of column A
I use a small macro
View 6 Replies
View Related
Dec 13, 2011
Currently I got 1 vba coding which only filter with 3 criteria. Can I alter the vba to have 4 to 5 criteria in the filtering? Below is my VBA coding. Let say I want to add 1 more filter for column C2...
Range("A2").Select
Selection.Sort key1:=Range("E2"), Order1:=xlAscending, key2:=Range("B2"), Order2:=xlAscending, key3:=Range("A2"), Order3:=xlDescending, Header:=xlYes, ordercustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
View 3 Replies
View Related
Jun 7, 2007
I have a excel of about 5000 rows and 80 columns. Each row corresponds to a particular set of experiment. I want to reduce the number of rows by removing useless experimnets like controls etc.
I want to search the row for some key words(ex. control) and if it present then remove it. It should prompt user to enter the keyword and the original file should not be disturbed. It can be copied to 2nd worksheet.
View 9 Replies
View Related
Oct 29, 2013
In the advanced filter, I am given two criteria one is filter by unit price by less than 1000 and order no atleast 100 .
View 6 Replies
View Related
Jul 10, 2012
How to give a cell link instead of any value for filter criteria, For example I need the data between two date range, the first date is in cell A1 and second date is in cell B1 by using macro. I have tried by using below code also but after filter all data hiding.
Dim a As Date
Dim b As Date
a = Range("a1")
b = Range("b1")
Rows("2:2").Select
Range("A2").Select
Selection.AutoFilter
Selection.AutoFilter Field:=1, Criteria1:=">=a", _
Operator:=xlAnd, Criteria2:="
View 1 Replies
View Related
May 5, 2009
I would like to filter a row using the following criteria: date should be < or = todays date.
I have tried the below but it doesn't work
Selection.AutoFilter Field:=11, Criteria1:="
View 9 Replies
View Related
Aug 20, 2008
I am using the code below to coax Autofilter into letting me use three criteria. I can hard code the values in for two of the cells (B6 and C6 in this case) but for it to be of any use I need the array to use the actual values found in those two cells.
With Worksheets("Sheet2")
Cells.Autofilter field:=1, Criteria1:=Sheets("Sheet1").Range("B1").Value
Cells.Autofilter field:=6, Criteria1:=Array("2880", "2879"), Operator:=xlFilterValues, _
Operator:=xlOr, Criteria2:=Sheets("Sheet1").Range("D6").Value
End With
How should this be setup to allow the array to read the two actual cell values?
View 2 Replies
View Related
Nov 8, 2006
I have a table that I filter out each buyer
Buyer Item Weight
Smith PartA 1000
Smith PartB 1000
Jones PartA 1000
Jones PartB 1000
Fred PartC 900
So when I filter out Jones, it would look like this
Buyer Item Weight
Jones PartA 1000
Jones PartB 1000
With Jones cell reference A4 & A5. Can I link a cell to the 1st visible cell below the autofilter? This cell would change each time I selected a different buyer.
View 3 Replies
View Related
Jul 11, 2007
What i need to do is basically delete every row in my spreadsheet that contains the criteria "L-0.###" in said column. by ### i am referring to 3 decimals, such as:
L-0.250
L-0.000
L-0.555
and so on. you get the idea.
with the below program i got it working so i can type in:
L-0.***
and have it sort out everything proceeding L-0. ...problem is i need to keep the data such as this:
L-0.53
L-0.00
L-0.0
or basically everything not 3 decimals in with a head of L-0.
here is the macro i'm using:
Sub DeleteRowByString()
'
' DeleteRowByString Macro
' Macro recorded 7/10/2007 by Khenzel
'
' Keyboard Shortcut: Ctrl+Shift+S
'
'Get the criteria in the form of text or number.
vCriteria = Application.InputBox(Prompt:="Type in the criteria that should be removed from matching columns. " _
& "If the criteria is in a cell, point to the cell with your mouse pointer", _
Title:="Ferguson Enterprises, Inc.", Type:=1 + 2)
'Go no further if they Cancel.
If vCriteria = "False" Then Exit Sub
'Get the relative column number where the criteria should be found
lCol = Application.InputBox(Prompt:="Type in the relative number of the column where " _
& "the criteria can be found. (Ex. A=1, B=2, Etc.)", Title:="Ferguson Enterprises, Inc.", Type:=1)
if possibly a modification in my coding to make this work, or simply a criteria i can type in to make it happen.
View 4 Replies
View Related
Oct 24, 2007
Anyway, in my workbook I have a master sheet which contains all the information entered (this master sheet will continue to grow as more information as entered). I want to create a userform to allow someone to search the data by selecting a date range (from/to) and a criteria (Pending/Settled) and for the results to be copied into a new sheet (simply I don't want the raw information tampered with in an unregulated way).
View 3 Replies
View Related
Jun 1, 2008
i want to display the results of one criteria using VBA codes instead of just filtering one by one to display the result and collate it. I have attached the sample. I want to find the "subcodes" of name "kathy". to be able to do that, i filter "kathy" to display all the "codes" then filter all the "codes" to find the "subcodes". is there vba code for this one so that when i input the name, all the subcodes will be displayed?
View 6 Replies
View Related
Oct 21, 2006
I am trying to solve a problem. I am currently using this formula
= SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)
This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.
So the info looks like this in excel
MARKETING 200612 -10
MARKETING 200701 -25
MARKETING 200708 -50
ECONOMICS 200709 -30
The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.
View 5 Replies
View Related
