Filter & Sort Multiple Columns With Single Criteria
Sep 27, 2008
I have a spreadsheet with multiple columns. The first column defines a "route", and the next two list "start" and "end" cities for that route. The fourth column lists the length of each route. There are only a limited number of cities, so the same entries appear in both "start" and "end" several times. I would like to use Autofilter to sort the list for every appearance of a given entry in either "start" or "end". Is there a way to make Autofilter sort mutiple columns simultaneously?
I could achieve the desired end result with Advanced Filter, but I want something with the ease-of-use and immediate update/response of Autofilter. Advanced Filter requires explanation (as well as lots of clicking and typing) whereas Autofilter is self-evident. I also want to avoid VBA Macros as they are not well-understood by the users who will use this spreadsheet (and any VBA Macro will require very specific input to work properly.) Is it possible to do what I want? Or is Advanced Filter / VBA the only way to do it?
View 2 Replies
ADVERTISEMENT
Mar 8, 2014
I have a very large table and i need to be able to Hide/show specific ranges based on:
Filter +and+ specific cell values in columns
brief example of the table : tablee.png
So...
1. Filter Column "B" (in this case we select "HELPING")
2. Auto hide/show collumns. - IF "C1" = "Required" THAN Show "C:E", IF "C1" ="N/A" , HIDE "C:E" and so on for every column like above.
There are over 80 columns like the "C:E" range. and I only need to show those that are "Required".
View 1 Replies
View Related
Sep 9, 2012
I have following data to sort/filter
Sector
Flt no
origin
[Code]...
Is this possible with excel functions?
View 1 Replies
View Related
Jun 6, 2014
I have a workbook has a "Summary" worksheet. I would like to be able to do the following:
(1) Sort columns D, G, J, M,... (the number of columns are different each time I run the macro that I have).
(2) create a combo box to be able to the data (that sorted in 1) by month (1,2,..., 12).
see the attached file
View 5 Replies
View Related
Aug 31, 2012
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
View 1 Replies
View Related
Feb 19, 2013
I have a 6000+ row database with 5 columns across. The 5 columns have the following headings: Hair Color, Eye Color, Age, Location, and Salary.
I have created macros that will filter each column based on criteria - for example:
[Code].....
As you can see, at cell J10 and K10, I list the filter that is used for a particular search. Some searches, will only have 2 search criteria, some may have all 5, etc.
On a separate worksheet (in the workbook), I have a "Report Tab", my question (after a long build up) is how do I dynamically change the columns and values on the "Report" tab depending on the search that I perform? For example, if I did a two variable filter (Hair and Salary), those would be the only two columns on the report - if I did all five variables for the search, all columns would be on the report, and so on.
View 1 Replies
View Related
Feb 7, 2014
Certification and Training tracking.xlsx
I want to create a certification only list on a separate tab of training that has been completed where a certification has been issued (as indicated by a "Y" in the "Certification?" column on the training tracking tab) and then populate from some of the fields vs. all of the fields.
What I have now, only pulls the first occurence, not all occurences. I saw that I could have identified the multiple columns that needed to be populated, but it didn't work either, so I'm fine putting a separate vlookup in each column.
View 6 Replies
View Related
Feb 15, 2010
I found this code on Ozgrid to sort all columns of a worksheet that were continuous with no gaps or spaces that works well:
Sub CopyToA()
Do While ActiveCell <> ""
Range(ActiveCell, ActiveCell.End(xlDown)).Cut Destination:=Range("a65535").End(xlUp).Offset(1, 0)
ActiveCell.Offset(0, 1).Select
Loop
End Sub
However, I've tried to manipulate the code myself to 1) find all columns that aren't empty then 2) sort each column individually (WITHOUT expanding the sort to other columns) and 3) combining all the numbers into one seperate column. There are many posts concerning sorting but not one that addressed this particular situation.
View 2 Replies
View Related
Jan 15, 2013
I am looking to split multiple different entries in a single cell into multiple columns and repeat this for all rows
Example (I have the below in a single Cell as column headers)
NCM Server Mgmt VLAN Site ID
Next Line down is the data (Each row in a single cell)
Enabled 10.10.10.0 50 TEST SITE 1
Enabled 10.10.20.0 50 TEST SITE 2
Disabled 10.10.30.0 50 TEST SITE 3
How I could achieve this as I have a number of projects where this would become useful
I know you can use delimiters but with spaces between the values I just can't fathom a way forward.
View 12 Replies
View Related
Nov 18, 2013
I have a Excel sheet which has a Product type values ASP,VSP etc in the first column. The second column has values Product Sub Types,which has values abc123, abc123456,abc123789, def123,def123456,def123789.The third column ServId's abc01,abc02,def01,def02.
If the Product Type is ASP,then I need values abc123,def123
But if Product Type is VSP, then I need values abc123
abc123456;abc123789
def123
def123456;def123789
View 4 Replies
View Related
Jun 13, 2007
I have a dataset, which I would like to sort on multiple criteria. The code I have is :
Dim Lst As Long
Dim Hdr As Range
Lst = Range("A65536").End(xlUp).Row
Set Hdr = Range("A6:AD" & Lst)
With Hdr
.AutoFilter
.AutoFilter Field:=9, Criteria1:="Complete" 'Match Status
.AutoFilter Field:=14, Criteria1:=Array ("Pending", "Technical", "PR", "Regional", "=") 'Case Study Status
End With
Field 9 Match Status will always be Criteria "Complete"
Field 14 may contain different variables depending on the dataset. I want the filter to bring back all Match Statuses (Field 9) "Complete" and multiple Case Study Statuses in Field 14.
This code filters correctly on Field 9, but is only bringing back blank cells in Field 9 when there is data that has Case Study Status "Pending", "Regional" and "Blank".
View 9 Replies
View Related
Jun 18, 2008
I am trying to run a macro to filter data based on 3 criteria. i want to filter column c to show rows with "Application", "Application / Web", and "Application / Database" which is referenced in the criteria range stated below.... Sheets(" Validation").Range("D95:D97"). for some reason it does'nt pick up the answers when i know that they exist in column c. could it be that they are formulas populating column c?
Sub Macro3()
Range("c4:c200").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:= _
Sheets("Validation").Range("D95:D97")
End Sub
View 3 Replies
View Related
Jan 19, 2010
IM trying to add the result of multiple ranges sharing a single criteria and have had no luck. I am trying to get the range from every other colum and have the total qty of the selected criteria display in a single cell. The best way to describe is countif with multiple ranges and a single criteria. perhaps countif isnt the answer, it is the only way i know to describe the issue though.
View 3 Replies
View Related
Mar 18, 2013
I'm trying to add to my code an autofiler with multiple criteria, the criteria is held in single cell. The criteria is made up of anything from 5 to 30 cells, then i have tried to concatenate these separated by commas, in speech marks, speech marks and commas etc., set them as an array the use that in my filter, but nothing seems to work.
View 6 Replies
View Related
Apr 21, 2014
i have my "raw data" and in my "summary" sheet, i want to show the data by the data that is filter in range D15:D21
Essentially, when the user filters the data from cell D15, i want the the macro to paste the data row D27 down/across from the "raw data" table. in addition, i am not sure how to create dependent drop down.
for example, in cell D15 it shows "segment"; in the cell below, D16 (tyre size), i want it to list all tyre sizes within that selected "segment"; when i want D17, to show "speed index" for by segment and tyre size etc.
in the table, i want the macro to show the data based on what the user filters from above. i can then do my calculations but getting this to work is the tricky part.
View 14 Replies
View Related
Mar 5, 2014
Can I use vba advancedfilter to work with more than one criteria?
I presently have one range designated. At the top cell has the field, or column, header name being "Student", then followed by a list of 6 people, located in Sheets("Extract").Range("A1:A7"), which is then extracted from Sheets("Complete").Range("tblPrimary[#ALL]") to Sheets("Extract").Range("AA1") as in:
[Code] ......
I want to also be able to filter out a specific month, whose field/column name just happens to be "Month", but I suspect I will need to change it to "InfoMonth" or the like to avoid the probable key word of "Month"...
The months are numerical in those fields - 1 through 12.
Can I add to the present filtering line or do I need to then create an additional filter?
View 6 Replies
View Related
Oct 21, 2008
I have a range of data (up to 20,000 cells) that has up to 30 different entries. I need to apply a filter to this data to filter out all but 5 of these.
View 5 Replies
View Related
Feb 7, 2012
I have a list of farmers in A1:A1000 with the types of livestock they keep in col B, delimited with commas and spaces e.g:
Col A Col B
Name Animals
Smith Cows, Pigs, Sheep, Horses
Jones Sheep, Pigs, Chickens, Geese, Alpaccas
Price Cows, Sheep, Pigs, Chickens, Rabbits
Williams Cows, Chickens, Horses, Alpaccas, Pigs
I need to be able to filter this list using up to 3 criteria, e.g. Filter all farmers with Cows, AND Sheep, AND Pigs. Applying this to the data above would show Smith and Price.
The user would need to enter the criteria somewhere, preferably in 3 cells, let's say D1, D2, & D3. I reckon I need to use Advanced Filter, but not sure how to do it with all the animal types to be filtered being in one column.
View 2 Replies
View Related
Sep 25, 2007
I currently use this filter to display rows with exact values as shown in this example:
Sub New_SheetUnpaidInvoices()
Application.DisplayAlerts = True
Worksheets("Closed Yr. 07").Activate
Columns("S:S").Select
Selection.AutoFilter
ActiveSheet. Range("$S$1:$S$1127").AutoFilter Field:=1, Criteria1:= Array( _
"BOB JONES", "JIMMY SMITH", "SUSAN LEE", "JONES SMITH LEE"), Operator:=xlFilterValues
End Sub
Sometimes, however, the worksheet cells contain simply combinations of last names like "JONES SMITH LEE" or other combinations. And, the last names appear in random order. So, I'd like to able to filter all rows that contain portions of the string without having to worry about the order and the exact string, etc. If the autofilter can return rows anytime it finds Jones, Smith or Lee regardless of order, that's be great.
View 7 Replies
View Related
Apr 9, 2014
i am looking some formula to make sequence number with criteria;
1) if in cell B2 contains only single/one data ----the result is mark "-"
2) if in cell B2 contains several data (not single)----the result is auto numbering with adding mark "." (dot) and start from 1.,2.,3.,4,etc........
for the detail,
condition 1 (multiple data in col.B)
number
name
1.
john
2.
mike
3.
sisca
etc...
condition 2 (single data in col.B)
number
name
View 2 Replies
View Related
Sep 25, 2008
I'm trying to use the advance filter for multiple criteria in one column. It works fine if the criteria is ="*10*" (ie where the cell in the range has 10 in the string) plus other = criteria. What I cannot get to work is where the range doesn't equal 10 in the string. I've tried ="<>*10*" and other variations to no joy.
View 4 Replies
View Related
Sep 15, 2008
I need to filter out data which displays only a few categories of information at the same time in the same column. For example, column A: David, Susan and William. After filtering the data, it will show David, Susan and william information. I have tried custom filter, but it only allows 2 conditions. I need to show more than 2 conditions of data. I have tried working out using office assistant guide on Multiple Criteria in one column to no avail. Only shows a single cell.
View 9 Replies
View Related
Mar 19, 2007
Example attached. I need to filter rows based on a start date and stop date, columns C and D. So for example the filter date is 01Mar07 (located in A5). As this date in this cell is changed the rows are filtered accordingly. I need to filter rows so that any row with a start date which includes Mar 07 is shown and I need to include all rows that have an end date in Mar 07. This would result in the inclusion of an event that started in Feb and Ends in march being displayed.
Additionally, I would need to clear the filter. I'm just starting out, I'm sure this is easy for you all the excel experts., and you may probably have a better method to approach this.
View 2 Replies
View Related
Feb 5, 2013
I have two workbooks at the moment, one which holds a whole host of customer and accounts details and another which holds only the customer details. What I'm trying to do is cross reference the two to determine if a customers details appear on both and if they do highlight this, ultimately I'd like it to pull the customers account number back but even if it highlights a match that would be sufficient.
The only unique criteria I have to do this are customer surname and customer postcode.
In the Customer details spreadsheet I'm attempting to enter a formula which will look at the specific surname & postcode held on the row in which it is entered. It will then look at all of the rows on the other spreadsheet and determine whether any of them meet both criteria.
If they do I'd like it to display "match" if they don't I'd like it to display "no match"
View 2 Replies
View Related
Nov 28, 2012
Attached is a sample workbook, but essentially what I'm looking to do is automate the process of searching through a data set where the value of interest (in this case, names) often has multiple entries, with different values attached to each instance.
I would like to be able to get a list of all values in a given column that match a specific name in another column.
Currently I'm using a basic INDEX/MATCH search just to see whether the data exists at all, but that's only half of what I have to do here, and I'm totally stumped on how to get a comprehensive list of all matches.
For reference, if you look at the sample, what I need is a list of all values in the "CPT" column that match the name searched for in the first column.
The actual data set size is at most 3-400 entries, if that makes a difference in how to approach this.
CPT Sample Book.xlsx
View 4 Replies
View Related
Aug 18, 2014
Have a sheet with list of strings in C:C
Examples of string:
RIO AU 082814 45
RIOE AU 102815 45.01
etc...these are the two primary types
Wish to reorder row 6 onwards according to the following hierarchy:
1st order: year number ascending (ie the last 2 digits of the 6 digit mid: 14, 15 in our example)
2nd order: month number ascending (ie the first 2 digits of the 6 digit mid: 08, 10 in our example)
3rd order: strike value ascending (ie the number on far right: 45, 45.01 in our example)
sortMacro.xlsx
View 3 Replies
View Related
Feb 12, 2014
Before
XYZ1
XYZ2
XYZ3
XYZ4
XYZ5
XYZ6
XYZ7
After
XXXXXXXYYYYYYYZZZZZZZ1234567
[Code] .....
View 10 Replies
View Related
Aug 17, 2006
I have a long list of 2 columns containing data as follows:
country1 date1-1
country1 date1-2
country1 date1-3
country2 date2-1
country2 date2-2
country3 date3-1
country4 date4-1
country4 date4-2
country4 date4-3
which I would need to move to get one column per country with the top cell the country name and below each name all the related dates, e.g.
country1 country2 country3 country4
date1-1 date2-1 date3-1 date4-1 etc.
date2-1 date2-2
date3-1
I have searched and found almost similar questions and tried to apply it to this case, but not being versed in VBA it was a failure on my part
View 4 Replies
View Related
Jan 16, 2014
I have a line that is commented out in the bottom - that is an example of what types of filters I want to do but dynamically. Users choose multiselection from a list box then it filters the sheet for them. It is pulling the data from the listboxes but when it is more than one item it is Putting the whole thing in as if I said text = "ABERTI", "AMALON", "BCASTE", "BGELLE", "CFRANC" - No I want to filter by each of these (it believes this is one long string)
Here is the code:
[Code]....
This code does not filter correctly.
View 2 Replies
View Related
Jan 29, 2009
I'm trying to create a formula (used in sheet 2 column B) that would generate the results in sheet2.B based on the contents of sheet 1. sheet2.B2 would contain a formula searching for the both "Y" in sheet1.C and the text in sheet2.A2 (in this case "E&P"). When each match is found, the contents of sheet1.A should be returned to sheet2.B, as shown in the mockup. There will be multiple matches (at least 15-20) for each search criteria, and I don't know how many there will be ahead of time.
I've tried various formulas, and they either have incorrect syntax and return every row in a range, or only return the first match correct match each time instead of all correct matches. I found some UDFs posted online that claim to do this, but I've gotten them into the spreadsheet and they generate # NUM errors. I would prefer to work with Excel-native formulas if possible, because I'm going to eventually hand this off to someone else to maintain and they may not have the level of expertise to deal with UDFs.
View 4 Replies
View Related
