I am trying to filter a worksheet based on an array I set up. Below is the code that sets up the array and then the code for the filter. The problem is the filter isn't filtering anything and showing no results.
With Worksheets("UPT")
VAcusipz = .Range("F2", .Range("F" & Rows.Count).End(xlDown)).Value
End With
ActiveSheet.Range("A5:I80000").AutoFilter field:=2, Criteria1:=Array(vacuspiz), Operator:=xlFilterValues
I have a file which has monthly return data from a number of funds across many years. Some funds were added into the database earlier or later, therefore the 'starting' dates of when we have return records varies for each fund.
What I need to do is find a way to filter out the first 24 months of data for each fund. Because the 'first 24 months' will be a different timeperiod for each different fund I cant run a simple filter.
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies View RelatedSay I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
I'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
I want to pass an array to Offset in the "Height" parameter, without having to type the array.
{=MAX(SUBTOTAL(9,(OFFSET(A1,ROW(1:5),,{1,2,3,4,5}))))}
I can't seem to figure out how to build the {1,2,3,4,5}. I've tried another ROW(1:5) and have tried nesting that like N(ROW(1:5)) but nothing works.
How I can get the {1,2,3,4,5} without having to type it out (so that I can expand this to a larger list)??
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
I am having an issue filtering data in a spreadsheet:
Each set of information has 5 lines of information (title, information, manager, status, sponsor) and the first column of each data set is a merged 5 row box with the area of operation (this does not have to be merged if this is creating the issue). I need to be able to filter by area of operation and have all 5 rows showing. Right now, Excel only shows me one row for each set of data with the area of operation as one row.
wondering is there a VBA equivalent of --() in excel that turns trues and falses to 1's and 0's?
View 14 Replies View RelatedIs there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
=CORREL(C1:C10,C12:C21) at H1
=CORREL(C1:C10,C23:C32) at H2
=CORREL(C1:C10,C34:C43) at H3
etc
can i have a macro that first array remain the same, and second array always 11 cells added. drag it down also can
I've tried to multiply each element in a 6x6 array by a similar 6x6 array, both on the same sheet, and it worked.(see Macro2 and attached xls file "Test").Then I got more ambitious and tried to do the multiplication from a standard array in sheet "TestA", with the result on the same sheet, by each array in sheet "TestB" and failed.How do I solve this problem? Pgualb PS:I'm using the R1C1 style.
Sub Macro2()
For y = 29 To 34
For x = 2 To 7
Cells(x, y) = Cells(x, y - 27) * Cells(x, y - 18)
Next x
Next y
End Sub
Sub Teste12()
'Multiplica matriz em TestB por matriz padrão em TestA com _
'resultado na matriz em TestA correspondente à matriz em TestB
'
Dim x, y As Integer
For y = 2 To 7.............
I have a spreadsheet with Row 1 as the header and Row 2 as sub-headers. I want to filter automatically to 2nd row, but whenever I press on Ctrl+Shift+L, I have the first column filtered. I have another spreadsheet that whenever I press Ctrl+Shift+L, it automatically filters the 2nd row instead. I'm not pretty sure what's the difference. I have my spreadsheet frozen on cell B3 (not sure if it has something to do with freezing cells. I know I can select 2nd row before pressing on Ctrl+Shift+L, but is there some other way to have this automated?
View 2 Replies View RelatedIf I give excel the advanced filter criteria <=2/15/2008 it seems to list all the dates prior to and on that date. Are there any pitfalls to this filtering technique (i.e. would any dates fall through the cracks)?
View 2 Replies View RelatedI would like to know whether it's possible to evaluate the percentage of a text value ie 'Approved', after filters on other columns have been done.
AREA YR DECISION
HN 09 APPROVED
NYM 08 REFUSED
RC 09 APPROVED
HN 09
RC 08 REFUSED
? %
So if I filter by AREA and/or YR, I would like the % of how many were 'Approved' in that filtered range (ignoring any blank cells in the DECISION column).
So far I have a basic
=TEXT(COUNTIF(C2:C6,"*Approved*")/ROWS(C2:C6),"0% ""Approval Rate""")
but it doesn't work once I filter by AREA or YR, and doesn't ignore blanks.
I'm quite newbie for VBA for excel, my friend asked me a favor to filter the data on his excel, so when he enter some keyword, the table would sorted (only show the row that have that keyword), and if possible that he enter it few keyword.
keyword example VB, oracle
table example ....
I have an excel with the following information
A1 - Is a dropdown which will have names of the systems (EAI,Mediation,CDF
..,All)
Row2 will be header which will have following data
B2 - Project Id
C2 - System ID
D2 - Project name
E2 - Project Phase
F2 - Status
from g2 to GN2 there are about 60 resources names entered
From C3 to F3 the data wil be entered and appropriately a chk mark will be
made to the corresponding resource wroking on that project
Say i have about 10 systems provided as dropdown for entering data in A1
(Ex: EAI, MEdiation, .....)
There are resources working for each system
when i apply filtering on a system name i shoud be able
to show only those resources working for that system and all others should be
hidden
Also under the "system" dropdown i will have an option "All", when "All"
option is selected i should be able to see all the data for all the systems.
EX: if i take system "EAI" and if the resources working for eai are there in
AO2 to AX2 then i want the resources from AX2 onwards and before AO2
not to be shown.
If i take a system "Mediation" and if its resources are from Z2 to AI2
then i want resources before Z2 and after AI2 notto be shown.
If "All" option is chosen then i should be able to see the whole sheet
with all the data for all the systems and all resources.
I have a filter that works in Excel 2007, and I'm trying to figureout how to make it work in Excel 2003. OrderNums is an array of multiple criteria. The below code works perfectly in Excel 2007.
View 3 Replies View RelatedI've filtered my data - such as selecting a date range - and then run the pivot, but the pivot ignores the filter and gives me data for all the dates. my workaround is to copy and paste the filtered data to a new sheet and run the pivot off that sheet. This works fine, but maybe I can avoid this step?
View 1 Replies View RelatedI have a worksheet with data in named tables on several sheets. Each of these tables has a column called "filter" (this is not always the same column number between sheets). The values in this column are either 0 or 1, depending on if that particular row is relevant under the book's current selections.
I'm trying to figure out the code that will take a table and filter it to show only the rows which have a 1 under the "filter" column.
I have added below code in module to get list of parts which are not delievered.
I am trying get code which will end the macro as soon as its do not find mentioned crieteria i.e.
("Not Delievered")
Selection.AutoFilter
ActiveSheet.Range("$B$1:$B$5").AutoFilter Field:=1, Criteria1:="Not Delievered"
I have a sumif function in a cell which adds values from a table from another sheet. When I apply a filter in the table, the sumif still includes the invisible rows. Is there a simple way to add only the visible rows with a function based on a criteria like with the sumif. i.e. after certain rows are not visible, still a further slection has to be made base don another cell in the same row.
View 2 Replies View RelatedI have a worksheet with about 1000 entries and I have this is column F so it can sort out all Euston entries into 1 block. =IF(E1="EUSTON",0,1) What I need to do also if it is possible all entries in column B end in even no's it sorts it out into the block that Euston is in and if their odd no's they go into the other block. Dont know if I can add to this or need something else.
View 9 Replies View Relatedto dynamically filter a list as shown below
View 9 Replies View RelatedI have a list of addresses (including street numbers and names), but want to select out addresses that match another list of street names only. I have only used vlookup before, but because one list included street numbers as well, I can't find exact matches.
I am using excell 2007.
I have a three columns of data in A,B,& C.
In column A a From Date
In column B a To Date
In column C a 6 digit number
I would like some code to achieve the following in this order:
1) Find any duplicates of the 6 digit number in column C and then place them on the same row as the first.
I.E if the following three matches are somewhere in columns A, B and C:
A B C
08/07/2007 22/12/2007 731655
22/12/2007 29/12/2007 731655
29/12/2007 05/07/2008 731655
I want them to place on the same line in date order like:
08/07/2007 22/12/2007 731655 22/12/200729/12/2007 731655 29/12/2007 05/07/2008 731655 (this line would be on the line above)
2)After all the above has been done I would like the code to go through and looking for matches of dates between column B and A
For example if I had the below two dates somewhere in the list:
A B C
08/07/2007 04/08/2007 729955
04/08/2007 01/09/2007 729293
I would want the bottom one to be moved to the same line as the top like:
A B C D E F
08/07/2007 04/08/2007 729955 04/08/2007 01/09/2007 729293
If there are more than one match like below:
A B C
08/07/2007 04/08/2007 729955
04/08/2007 01/09/2007 729293
04/08/2007 01/10/2007 729273
I would like the following:
A B C D E F
08/07/2007 04/08/2007 729955 04/08/2007 01/09/2007 729293
04/08/2007 01/10/2007 729273
3) AFter this was completed I would like to look for date matches one day apart for example:
A B C
08/07/2007 04/08/2007 759955
05/08/2007 01/09/2007 759293
And then place the bottom set of date along side the top like:
A B C D E F
08/07/2007 04/08/2007 759955 05/08/2007 01/09/2007 759293
I've been trying to write code to filter a list of date base on day of week (Mon, Tue, etc)
My problem is that i can't find a way to code the filter criteria... since the date does not contain any week of day constant. i don't want to create another column in my sheet to show the week of day constant and filter this instead.
Here's my not yet finished code...
Sub DayOfWeek()
Dim sAnswer As String
Dim bWkDay As Byte
Dim loMyData As Range
Dim iFilterCriteria As Integer
Dim Dateserial As Integer
Application.ScreenUpdating = False
sAnswer = InputBox("Please select day to display data (first 3 letter of the day, eg. mon)", Title:="Select day to display")