I've filtered my data - such as selecting a date range - and then run the pivot, but the pivot ignores the filter and gives me data for all the dates. my workaround is to copy and paste the filtered data to a new sheet and run the pivot off that sheet. This works fine, but maybe I can avoid this step?
View 1 Replies
I've attached some dummy data. Basically, everyday I'm going to dump a report containing data into a 'Data Dump' tab. 'Pivot 1 - Filtered' I have set up so that it will show specific product IDs only (In this example I only want to see 1X, 2X and 9D).
However, I now have a need to see the total value of that order number in 'Pivot 2 - Autofilter'. (For Example, order number 1111 has both 1X and 8D contained within it). Now obviously the simple thing to do would be to filter every order number shown in pivot 1, and filter pivot 2 with them. However when I'm doing this for real, this can be tens/hundreds of order numbers.
The only workaround I have found is to put a column at the side using VLOOKUP and if ISERROR is false then include in pivot, then used an autofilter on that, but I'd like to keep the normal pivot if possible.
I have a Pivot Table (pivottable1) starting from cell A1 (lets asume that this cell is "Pick up date"). What I want to do is to filter by each "Pick up date" one by one - for example by first date 2014-05-30 than do some stuff (I have this part of code so no worries) and after that pass to next Pick up date do the same stuff pass to the third pick up date and etc. The problem is that the number of Pick up dates can be different - sometimes it could be 10 pick up dates and another time it could be 150 of pick up dates. I suppose it should be some kind of loop but I have no idea how to start this.
View 2 Replies View RelatedI have a pivot table with a group # on the left, and team members on the right. There are multiple team members in each group, and each are on a separate line in the pivot table, like this:
Group #Team1chrisdawnsally2cassiechrisdawnkathysally3jimjoejohntomGrand Total
I need to find where "sally" is on the team (easy to do"), BUT I need to display the rest of the team members in the group with her, like this:
Group #Team1Sally, Chris, Dawn2Cassie, Kathy, Sally, Dawn, ChrisGrand Total
Using the concatanate function to put them all into one cell and then filtering for "contains" was all I could come up with, but there are 14,000 groups
I am currently using the following code below in the macros for filtering out a certain set of activities in fields LVL to be "0"
VB:
Dim PI As PivotItem
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Lvl")
.PivotItems("0").Visible = True
[Code]....
I now wish to filter lvl activities with pivot items " 0" and "1" as well.
One of the few flaws I have found using pivot tables is that when selecting from the the page field it does not filter the other page fields to match your current selection.
It does in the actual table, so why not the page fields?
For example we have a pivot table like the following
|Country| (ALL)
|City| (ALL)
|Count of People|
|YEAR| ________ |Gender|
_______________Male__________Female
2008__________1000 _________500000
2009__________9999999_______1
If I select England from the country, when I go to select a City I do not want to be able to select only the cities in England and not every city in the world.
The Attached File shows you how to deal with this Problem.
I'm working on pivot tables using excel macro. Basically , I need to filter out the year submitted according to the current year . I did this to filter out my pivot :
For Each PivItem In _
PT.PivotFields("Year Submitted").PivotItems
PivItem.Visible = True
Next PivItem
For Each PivItem In _
PT.PivotFields("Year Submitted").PivotItems
Select Case PivItem.Name
Case "2012"
[code]....
But this can only filter out year 2012 . I need to use this workbook for the next couple of years and I dont want to keep modifying the codes .
I am trying to create a Pivot Table that filters on a range of data.
I have a sheet with lots of data on it, and separate sheet where I have created my Pivot Table and my list I wish to use as the filter values.
I need to extract 630 specific Departments out of thousands and report the movements against those depts. The 630 will change as time goes on and I want to just have a range where I can update the values as and when changes occur. I initially tried using Filter on Department but realized this was going to be a very long winded process.
I have a pivot table in 2010- is there a way to filter the data using an external reference from the pivot table? I'd like to put the value in another cell and have the pivot update automatically when I type a new value in that cell.
View 2 Replies View Relatedright now, formula is simple as follows
Code:
Sheets("Shift Premium").Select
ActiveSheet.PivotTables("PivotTable3").PivotFields("DT_REPORT_DATE"). _
ClearAllFilters
ActiveSheet.PivotTables("PivotTable3").PivotFields("DT_REPORT_DATE"). _
CurrentPage = myDate
The idea is that the pivot table always displays yesterdays data.
However, there may not be any data for that day, so when i tell the macro to filter for it, I get an error.
My question is, how could I formulate some sort of iferror statement so that if yesterdays date isnt in the filter list, then it does nothing (by default leaving the filter on last populated date)?
I have a pivot chart, filtering data from a pivot table, the problem I've got stuck is that every time I filter the chart the colors and weights of the chart change to default values, not what I want, I've managed to every time I click on the pvt cht tab it updates with the colors and weights I want, but when filtering I don't know how to do.
View 1 Replies View RelatedUsing Excel 2007 I have a pivot table that counts that number of incidents based on month and year. To get the month and year I group the date field as months and years.
My problem is if I want to filter specfic months in say year 2012 it also takes out the month in 2013. I though it used to give you the option of year and date in the filter but mines are 2 seperate filters.
I'm running a pretty huge database with Part Numbers across several Suppliers which fluctuate constantly.
For example: a HEXAGONAL BOLT may have a Part Number ABC123, but depending on the size of the bolt it could be a ABC123-001 ABC123-V28 ABC123-40mm (etc)
There's a lot of data (some of it sensitive) so I don't want the users to see everything - I'm creating a front-end sheet and am looking for a way for a user to type in the Part Number "ABC123" into cell A1, then the Pivot below to auto-update (with Part Number on the 'Report Filter') to show all variations of ABC123, including ABC123-1 ABC123-2 etc - i.e. not an exact match; everything that contains the characters in cell A1.
The relevant information has been ported in and password protected on a sepearate sheet within the workbook, so it's literally a code to make the cell value affect the filter.
I am working on a pivot table just like the one on the picture here [URL] .......
Ideally I wanted the sums by date to be displayed horizontally and not vertically as shown in the picture, but was unable to do so. Anyways, I want to be able to filter those dates, so I can display data just from an specific date, and then change this date whenever I want and the new data will show up.
I tried doing by the checkbox that appears under the "data" dropdown on top of the column; However, when I uncheck a specific date, it dissapears and I have to add it again if I want to see it. Is there a way to keep the values on the dropdown even after I uncheck them? Or even another way to filter the information? Below is the pic of the dropdown I get when trying to sort the data, But as I said If I uncheck one of the values, it dissapears from the list.
[URL] ........
Is there is some way to filter based on the value in a specific subcolumn.
Using the example of a list of salespeople and their transactions over the year, who sell multiple products, the PT is Sales Person name for the Row Labels, and Type of Product for the columns. The resulting PT has 3 columns, for each of the products - e.g. table, chair couch, and the Values are the total number of that item sold. Is there any way I can filter, so that I will see only those sales people who have sold 3 tables or more lets say. (Thus enabling me to quickly see what other products those sales people have sold.)
(The actual situation is a lot more data heavy than that - it is actually a list of donations for a non-profit, coming in from hundreds of people, across a dozen different categories; I am trying to analyse the extent to which people who gave for a particular category (Direct Mail solicitation) also gave across other categories.
So far I've manipulated things by inserting a '% of row total' value into the PT and then using countif/sumif functions outside of the PT to figure out how many people donated solely to this category (= 100% of row total), and how many donated to other categories too (= more than 0% of row total, less than 100%), which gives me a decent summary of sole donations to this cause vs other categories too, but doesn't visualise what the actual other categories donated to were. I've also investigated making a PT of the existing PT, but I'm not sure if that's even possible...)
(I'm using Excel 2011 for Mac, but if there's some other version that would make this possible, I may be able to use another computer.)
is there any way to NOT Displaying Items with No Data when filtering data in my pivot table?
For instance, I have 2 report filters: Category and Subcategory, when I select a category in the first filter I want to see only the options of subcategories with data in the second filter, I mean display only the subcategories of the Category previously filter.
Same scenario I have with a report with Directors and Organizations, when I filter one Director it would be nice to see only the organizations of this director and not all options on the data.
how can i sum pivot table filtering some values in other table. if i change filter, sum is changed
View 1 Replies View RelatedI am having an issue filtering data in a spreadsheet:
Each set of information has 5 lines of information (title, information, manager, status, sponsor) and the first column of each data set is a merged 5 row box with the area of operation (this does not have to be merged if this is creating the issue). I need to be able to filter by area of operation and have all 5 rows showing. Right now, Excel only shows me one row for each set of data with the area of operation as one row.
I have created quite a nice little macro that;
drills through a lot of key figures, updates a pivot chart and copies the chart to powerpoint.
However it crashes on one particular data set every time with this error:
Run-time error '1004':
Unable to set the _Default property of the pivot item class
The code where the debugger stops is the last line below here.
lngKpi = Sheets("Helpfile"). Cells(lngRow, 2)
Sheets("Charts").Select
ActiveSheet.ChartObjects("DK").Activate
ActiveChart.PivotLayout.PivotTable.PivotFields("KPI # (overall").CurrentPage = lngKpi
I can manually change the pivot chart to the keyfigure it crashes on and thereby workaround the problem in the macro. Also it works for more than 50 other keyfigures without problems.
I was wondering why a pivot table will allow you to tick and untick pivot items that are not visible?
My pivot tables have a lot of data and someone may wish to only see the pivot items that are shown in the pivot table in its currrent view. Is there a way in VB to achieve this?
In my attached example when you suntick the Media 'TV' then look in the 'Channels' drop down you can still see the tick boxes for TV channels 'ITV' and 'TV_BBC1' (I know why they are still ticked, I'd just like them not to be visible).
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
My input data for Pivot table has a column named "Month". The month values are like April 07, April 08, Nov07 in random order for period between Jan 07 to Aug 08.
When I create a pivot Table, this column is sorted alphabetically (April 07 is followed by April 08) but I need it to be sorted in the ascending order with respect to month (April 07 is followed by May 07).
I further use this data to plot a Pivot Chart. There is another issue here. I want to use separate colors for each series. I do not know how to achieve above 2 things.
I have a spreadsheet with Row 1 as the header and Row 2 as sub-headers. I want to filter automatically to 2nd row, but whenever I press on Ctrl+Shift+L, I have the first column filtered. I have another spreadsheet that whenever I press Ctrl+Shift+L, it automatically filters the 2nd row instead. I'm not pretty sure what's the difference. I have my spreadsheet frozen on cell B3 (not sure if it has something to do with freezing cells. I know I can select 2nd row before pressing on Ctrl+Shift+L, but is there some other way to have this automated?
View 2 Replies View RelatedIf I give excel the advanced filter criteria <=2/15/2008 it seems to list all the dates prior to and on that date. Are there any pitfalls to this filtering technique (i.e. would any dates fall through the cracks)?
View 2 Replies View RelatedI would like to know whether it's possible to evaluate the percentage of a text value ie 'Approved', after filters on other columns have been done.
AREA YR DECISION
HN 09 APPROVED
NYM 08 REFUSED
RC 09 APPROVED
HN 09
RC 08 REFUSED
? %
So if I filter by AREA and/or YR, I would like the % of how many were 'Approved' in that filtered range (ignoring any blank cells in the DECISION column).
So far I have a basic
=TEXT(COUNTIF(C2:C6,"*Approved*")/ROWS(C2:C6),"0% ""Approval Rate""")
but it doesn't work once I filter by AREA or YR, and doesn't ignore blanks.
I'm quite newbie for VBA for excel, my friend asked me a favor to filter the data on his excel, so when he enter some keyword, the table would sorted (only show the row that have that keyword), and if possible that he enter it few keyword.
keyword example VB, oracle
table example ....
I have an excel with the following information
A1 - Is a dropdown which will have names of the systems (EAI,Mediation,CDF
..,All)
Row2 will be header which will have following data
B2 - Project Id
C2 - System ID
D2 - Project name
E2 - Project Phase
F2 - Status
from g2 to GN2 there are about 60 resources names entered
From C3 to F3 the data wil be entered and appropriately a chk mark will be
made to the corresponding resource wroking on that project
Say i have about 10 systems provided as dropdown for entering data in A1
(Ex: EAI, MEdiation, .....)
There are resources working for each system
when i apply filtering on a system name i shoud be able
to show only those resources working for that system and all others should be
hidden
Also under the "system" dropdown i will have an option "All", when "All"
option is selected i should be able to see all the data for all the systems.
EX: if i take system "EAI" and if the resources working for eai are there in
AO2 to AX2 then i want the resources from AX2 onwards and before AO2
not to be shown.
If i take a system "Mediation" and if its resources are from Z2 to AI2
then i want resources before Z2 and after AI2 notto be shown.
If "All" option is chosen then i should be able to see the whole sheet
with all the data for all the systems and all resources.
I have a filter that works in Excel 2007, and I'm trying to figureout how to make it work in Excel 2003. OrderNums is an array of multiple criteria. The below code works perfectly in Excel 2007.
View 3 Replies View RelatedI have a worksheet with data in named tables on several sheets. Each of these tables has a column called "filter" (this is not always the same column number between sheets). The values in this column are either 0 or 1, depending on if that particular row is relevant under the book's current selections.
I'm trying to figure out the code that will take a table and filter it to show only the rows which have a 1 under the "filter" column.
I have added below code in module to get list of parts which are not delievered.
I am trying get code which will end the macro as soon as its do not find mentioned crieteria i.e.
("Not Delievered")
Selection.AutoFilter
ActiveSheet.Range("$B$1:$B$5").AutoFilter Field:=1, Criteria1:="Not Delievered"
