I have the following Data:
Full Drum
247
Full Drum
247
Full Drum
261
Full Drum
261
[code]....
I need to know how to find the best combination of combining these drums to get the highest average from each combination. Each combo will have 3 drums except for one which will have two and a half.
I need to find possible combinations for the following example:
a*x + b*y + c*z = t
p = 10
Where
a = 0
b = 5
c = 10
t = 30
x + y + z has to = p
a, b, c, t, and p would be variables that I would specify. The numbers above are just examples. What I would need to see as output would be:
7a, 0b, 3c
4a, 6b, 0c
5a, 4b, 1c
etc...
I have a simple list of names with associated numerical values.
I would like to create a formula that will produce a series of all possible series of 8 of those names whose combined numerical values are at or below a certain threshold (or between two thresholds, if that's easy). Bonus points if the total combined value for each group is easily shown, but that'd just be gravy.
How do I create a formula that will count the occurrences on each row within the range F7:H106 where the single digit in FJ6 is paired with the 2 digit value in FF7. Match in any order.
example
If FF7=00 and FJ6=1 (Match 00 with 1 in any order)
f7:h7=010, match, count 1
f8:H8=059, no match
f9:h9=100, match, count 1
f10:h10=001, match, count 1
f11:h11=007, no match
Result=count=3
i found this vb code the other day on this forum from a post made way back in 2005 i think it was. I've found it really useful for what i wanted to do, but i wonder if it can be expanded or changed to allow for more sets of imformation.
This is the Code, it finds all possible combinations from 3 sets of 3 results.
Option Explicit ...
I have another challenging solve for a VBA macro. So here it goes, as I have become frustrated trying to make an array formula with no joy. On my sample worksheet provided below this is what I am trying to accomplish:
(Solution cells) B4:I4 looks to the (Combination cells) M5:R10 for a match
If a match is present then cell J4 gives a "win" ,
If no match then cell J4 gives a " lose ".
Next if a win is present in cell J4, then cell K4 looks for when the draw number that matches occurred on from cells A4:A10, then subtracts the two(e.g. solutions cells from combination cells) to give the actual " # of draws to a win ". If no win is present in cell J4, then the default is zero for cell K4
The formula would be copied down thru cells J4:K12
Please refer to sample worksheet attached so that you can understand more clearly of just what I'm trying to do.
I have 25 random numbers and I would like to get a possible 5 digit combinations of these numbers. Can anybody help me with the possible formula?
View 9 Replies View RelatedThe aim is to find those combinations of variable values which generate highest total gain. I attached the spreadsheet which shows the variables (A through K) and a Gain column. I created 5 additional tabs which show all possible 2,3,4 and 5-member combinations of the variables. These tabs are like coordinates of which variable combinations should be examined. As an example I used the first combination from the second tab = A and B. If you look at these two columns on the EXAMPLE CALCULATION tab you will see 7,7 in the Number combination which is the first number pair for these two variables. The headings of the red and the yellow columns calculate the total count for this number pair and the total gain. These were recorded on a separate EXAMPLE RESULTS tab along with some other pairs which appear afterwards (these were recorded only from the first 39 rows of the AB data). I need a macro which will cycle through each variable pair (only using the combinations from the tab 2 for now, annd later from 3,4 and 5 tabs) collecting statistics for each unique number combination it encounters (printing to a separate sheet one after one), such as shown on the EXAMPLE RESULTS.
View 9 Replies View RelatedWhat I am looking for is to select between 7 and 15 numbers in total, I want all the possible 6 digit combinations for this.
EG: if I choose 2,9,11,13,15,17&26, it would look something like this
2,9,11,13,15,17
2,9,11,13,15,26
9,11,13,15,17,26
And so on.
If I chose more numbers (10) 1,2,3,4,3,6,7,8,9,10 it would start something like this
1,2,3,4,5,6
1,2,3,4,5,7
1,2,3,4,5,8
1,2,3,4,5,9
1,2,3,4,5,10
And so on.
Please remenber I would like to be able to secelt between 7 and 15 number and be given all the possible combinations.
I would like it to be in one sheet but if that can not be done on as many as it takes.
It would be good if I could just type the required number into A1,B1,C1 and so on and they just gave the combinations required.
I have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
View 1 Replies View RelatedI have attached an example. If I have a set of numbers such as the one attached, is it possible to create a formula that will show me all the combinations of numbers that add up to 55.52? In the attached I have highlighted in different colours all the number combinations that add up to 55.52. The numbers highlighted in blue appear within more then one combination. Is there a formula that can do this for me, instead of randomly adding numbers hoping they add up to 55.52.
examples.xlsx
I have 3 excel sheets (A,B and C) linked to a master sheet (X). In each sheet (A,B and C), people enter unique idetifier in first column, its type (mr, ab, J) in the second column, start date in the third column and finish date in the fourth column. At the end of every week, i subtract each start date from the finish date and get the number of days spent for each unique idetifier (column N). I preiously posted a thread (Calculate difference between dates excluding weekends) to inquire about how to calculate the difference between finish date and start date and exclude the weekends. I received some nice solutions, but none has worked as the start date cane be weekend as well.
My second and major query is once i have the difference in weekedays for each unique identifier in all the three sheets, I want to calcuate the average of each identifier type (mr, ab and J) in the master sheet. In the master sheet, i have used sumproduct to calculate the average of each idetifier type from column N for each sheet. That means i have a column for A sheet, subdivided into three types, which include the average. I am using sumproduct for this. Once this is done for each sheet type, i need a final colum in the master sheet that calculates average of all mr from A, B and C together, and similarly for ab and J. The problem here is if i combine all the sumproduct formula, i am not gettng the right answer.
My formula looks like SUMPRODUCT((SheetA!$E$5:$E$40="mr")*(SheetA!$M$5:$M$40)) for all mr in sheet A. I then divide this by SUMPRODUCT((SheetA!$E$5:$E$40="mr")*(SheetA!$M$5:$M$40<>"")) to get the average of all mrs in sheet A. I do the same for sheet B and sheet C for all three identifier types. Now i want to combine the formula for all sheets together under mr, Ab and J. I thought the following should work ((SUMPRODUCT((SheetA!$E$5:$E$40="mr")*(SheetA!$M$5:$M$40))+(SUMPRODUCT((SheetB!$E$5:$E$40="mr")*(She etB!$M$5:$M$40))+(SUMPRODUCT((SheetC!$E$5:$E$40="mr")*(SheetC!$M$5:$M$40)))/((SUMPRODUCT((SheetA!$E$5:$E$40="mr")*(SheetA!$M$5:$M$40<>""))+((SUMPRODUCT((SheetB!$E$5:$E$40="mr") *(SheetB!$M$5:$M$40<>""))+((SUMPRODUCT((SheetC!$E$5:$E$40="mr")*(SheetC!$M$5:$M$40<>""))).....
But this is giving me wrong value. It is working fine when done for individual sheets, but when combined for all three sheets together, the value is wrong.
Column B: The day of the week that the date is, Sunday, Monday, etc.
Column C: Every date in 2008
Column D: my data (the number to be averaged)
What I need the formula to do:
Look in Column B for every instance of "Sunday", and count them up (they count only if the data in column D is not 0) and use that number to average the number in column D
So if I have 52 Sundays and we are only 4 weeks into the year and the 4 data points are 50, 100, 75, 25. The average will be 62.5 instead of 4.8 (divided by 52).
I am trying to figure out how to take the average of the last 4 "non-zero" numbers in a series of values.
The sheet looks something like this, numbers are all in one row:
7 , 7 , 7 , 7 , Total = 28 , 8 , 8 , 8 , 8 , Total = 32 , 0 , 0 , 0 , 0 , Total = 0 , 8 , 8 , 8 , 8 , Total = 32 , 7 , 7 , 7 , 7 , Total = 28 , 8 , 8 , 8 , 8 , Total = 32 , 0 , 0 , 0 , 0 , Total = 0 , 8 , 8 , 8 , 8 , Total = 32
I'm looking for a formula that will look at all the last few totals (starting from the end) and take an average of the last 4 totals that were > 0. In this case it would average {32, 32, 28, 32} ignoring the 0 total.
Attached Dummy file. I would like to be able to get the average time spent on a process for the day recorded on the "Results" tab. I have posted the answers it should be on the Results tab, which was done manually. I would like the file to do it on it's own. On the individual's tab, the time and instances will be recorded for each job. I believe I am close, and the only thing I need is the Results page to be able to return the desired results. Ranges varies day-to-day, and I think (maybe), I can figure out the dynamic range settings.
I would like to avoid creating a helper column for each set, because then I would be dependent on the person expanding on this. I am also avoiding Pivot Tables, I understand it, but not the ones that needs it. This will have about 15 tabs for employees, and could be possible that more or less will happen, depending on workload. This will continue to be manual for now.
I have a total in F16 that i need to find an average of.
The range is set from f4 - f15 (12 months) and need to find the running average per month. but as we only have done 5 months of the year so far that is the only average required (F16/5).
I need this to count at the end of june (F16/6) basically not counting any zero months (jul, aug, sept etc until the end of each)
I am just looking for an function which will gives me the average of the hours worked on daily basis. A breif descripiton is i have an workbook in sheet1 i have the sample report which i struggle to prepare on daily basis for each client.
Sheet2 i have the Raw data in column H i have the client name and then in column I is Date and finally in J the hours we worked on in it. To say i just want the average if the each client on the particular date as shown in Report sheet.
I want to find the average of a range.
I've put the range in order and I want to take off the top 7.5% and the bottom 7.5%. Then find the average of the data that is left. (the middle 85%)
Can I do this with a formula?
I want to find incremental average
My cell numbers are
AG4
AG4,AG13
AG4,AG13,AG22
AG4,AG13,AG22,AG31
and so on..
(In incremental of 9)
In the table below I'm trying to work how trend is being produced but I can't figure it out.
I have found how to find the moving average =AVERAGE(C2:C5)
I've tried a few methods using the trend function but I really don't understand what I'm doing. how its being calculated by looking at the table?
In column A is the staff name, column B is the start date, column C is the end date and column D is the difference.
I need to find the average number days for task completed for each staff for the week. I need a formula that will look for a particular staff name in column A ( which appears many time randomly in column A for each day of the week) and calculate the average days for the total task completed for the week.
Let's say I had the following data ...
47
50
50
50
44
50
46
50
Basically, I have 4 numbers, out of 50, as seen above...I want it so the last number (46 in this case) is special; what I mean by that is I want the following conditions to be met.
--If the special number is the lowest, just take the average of the four numbers, and divide it by 50
--If there is a (are) number(s) lower than the special number, then I want it to locate the smallest
---The smallest number should then be "replaced" by the special number (for calculations purposes only, not in the actual table)
So, in this case, since the special number (46) is not the lowest, excel would locate the lowest number (44), and calculate the average of 47, 50, 46, and 46 (the 44 was replaced by 46).
Ive been given the data for bond pricing for two tenures i.e. 15 years and 20 years . I needed to find the average pricing for 16.5 years , whether excel is able to compute such pricing?
View 5 Replies View RelatedI have two columns: 1) Last Date of each month from 2005 and 2) Value.
Date format: dd.mm.yy
For example:
31.01.05 1.7
28.02.05 -0.7
31.03.05 2.6
30.04.05 0.4
....
How can I find the average of second column of january months only? I tried countif, sumif and many others, but cannot find the solution.
I have attached an excel file. What I would like to find is the average of column D (number) with respect to column A (Genotype ) and also different wave length (Column C). i.e.:
Genotype 1 to its corresponding value in column D for wave length 450
Genotype 1 to its corresponding value in column D and for Wave length 470 to and so on.
Attached File : test2.xlsx
We are trying to track the average star values of reviews posted to our clients accounts. Here is an example of the spreadsheet we have set up:
Company Name
Review 1
Review 2
Review 3
Review 4
Review 5
Company 1
[CTY] 4 Stars review content
[ISP] 5 stars review content
[GGL] 4 stars review content
[CTY] 3 stars review content
[YELP]5stars review content
In this example, we use the initial [ ] to track which site the review was posted on ex: [CTY] means city search, [GGL] means google, etc.
We want to be able to track the average star value on each site. So the formula for City Search would scroll across the row of reviews, pick out reviews 1 and 4 and then find the first number in each and average them. The result in this case would be 3.5
From the research we have done so far, this looks like it will require a complex array formula. How to make this formula? Is this even possible what we are trying to do?
I am using Excel 2010 and I am currently trying to find the Avg Min / Avg Max costs for 4 different groups.. Players, Accompanying, Coaches, Medical.
I need it to get the minimum values from 3 different sections ( I am using custom names for them such as PlayerReg for Player Registration costs ) once it gathers the minimum / maximum values from the 3 different sections it needs to add them together to display the Avg Minimum / Maximum for each group.
At the moment I have =MIN(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Minimum /w Frequent Flier although the minimum value it should detect is $948.75 it displays $1115.
For maximum I have
=MAX(Total_Discount_7_Nights + PlayerReg + FrequentFlierFare) under Maximum /w Frequent Flier although once again this value should be $1174.50
Although for some reason it displays $978.75 - which is the minimum cost. The Maximum figures for the other groups (Accompanying, Coaches and Medical) don't even display values Instead it just has #VALUE! in which I'm guessing I have something wrong with it.
I need a formula that will scan column A (Code)total the like items (also) add column B (Qty) if there is a number greater than 1. Then add the price ($) together and divide by the sum of A&B.
In other words find the average price for the total of each item..
A B C
Code Qty $
PH06003000 1 1504.8
PH06003000 1 1582.24
PH06003000 1 1606
PH06003000 1 1504.8
PH06003000 2 3009.6
PH06003000 1 1504.8
PH06003000 1 1504.8
PH06003000 1 1504.8
PH06024000 1 2499.2
PH06024000 1 2499.2
PH06024000 1 1896.07
PH06024000 2 3909.66
PH06024000 1 2240.7
PH06024000 1 2259.4
PH06024000 15 30030
PH06024070 1 2039.4
PH06024070 1 1958.66
PH06025670 1 2521.2
[for excel 2000]
Hi chaps, I have a spreadsheet of lap times that I'm trying to generate an average time from. data looks a bit like this (in time format hh:mm:ss) :
01:23:34
01:44:23
01:56:34
01:23:56
-you get the idea. problem is, when calculating an average I get either #DIV/0!,#VALUE! or 00:00:00 depending on the approach I use (the column is definitely time format hh:mm:ss), so far I've tried:
=AVERAGE(H4:H433)
=AVERAGE(IF(H4:H433,H4:H433))
-and so on, none work all give a variation of the aforementioned errors. I've tried changing the column format to number, copying all the data to a new sheet, still no joy. This should be very simple, any idea what am I missing?
I am trying to find a formula that works out the average of the figures in column K.....my problem is that so far in column K there is only one positive number (11)- the rest of the cells are DIV/0 so the average is showing as DIV/0. This is incorrect as the average is really 11 - how can I sort this out with a formula?
View 9 Replies View Related
