Is it possible to use a FindFormat to find a Border(xlDiagonalDown)?
If so can you please show me the code to do so.
Example
Sub Find_F()
Dim e As Range
Dim r As Range
Dim c As Range
Dim lCount As Long
Dim strFirstAddress As String
Set e = Range("A1:A6")
With Application.FindFormat.Font
.Bold = True
.Italic = True
.Size = 16
End With
My goal is following:
I do an inventory of my schools equipment and have much info in many columns. But I just want to concentrate on column A.
This is example of the room names at my school and look like this:
Column A
A01
A01
A02
A02
....
I have the table, as shown on left in the appended image, and the final result should be the right one.
The steps are written as 1, 2, 3 and 4.
Untitled.png
The below code adds a line to the next blank row. I would like to add a border to this row that the values are going into. Columns "A:G"
Code:
Private Sub CMD_Add_Click()
Dim rNextCl As Range
Set rNextCl = Worksheets("Main").Cells(Rows.Count, 2).End(xlUp).Offset(2, 0)
Worksheets("Main").Activate
rNextCl.Select
Dim iRow As Long
[Code]....
I am after a bit of code which find a value in a cell "Grand Total" it may not be a the last row
Then finds the last column in the row and puts a border around the whole range.
I have a list (approx 2000 rows). I'd like to put a seperate border around any duplicates that are in the fourth column. If there isn't a duplicate then the regular gridlines are fine. I'd only like the first four columns to include this border. Is there a way for excel to automatically place borders around duplicates? Here is an example of what I have and what I would like it to look like.
View 9 Replies View RelatedDoes any know of excel code to know what know what kind of border it is. I converted a pdf file and now the data are on excel and there are borders and it looks to me like it is border with thickness of medium but when I run a code I produced and mark X to the column next to it to show that it is that border it gave me X on all the rows and so the medium thick border is excel grid without any borders.
Below a small example with the borders as they should be. How do i get a macro to put the borders automatically, depending on the similarity of the cells in column B ? Note the blanc column with the borders should be made automatically as well. Second problem: the minimum height of a "border" should be 34pixels as in the example so you can write something in there after printing the sheet.
View 9 Replies View RelatedThere was also another bit of code which added a border around the selected text.
It got stuck on this:
With Selection.Borders(xlInsideHorizontal)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
The problem was that there was no Inside Horizontal if there was only one row. I had to chage my code to include a header as well as any selected rows - giving me the two row minimum required. This does the job for now - I'll have to give it some thought on how to get around the problem without the extra header though.
I have seen spreadsheet where the user has made the outline of the cell border non-visible. This seems like a fairly simple task, but I can't seem to find out how you format this type of border.
View 2 Replies View RelatedI am using Excel 2007. One of my worksheets has a dark border around some cells. Instead of being blue the lines are black. I used the right click and format cells option but it does not work.
View 10 Replies View RelatedBottom border each page,
View 9 Replies View RelatedWhen I enter data (digits) into a cell, its left border
becomes thinner ! Where is the connection between format and content ?
Creating border in different size at single attempt. Example as shown in the picture.
Excel Format.jpg
How can I modify this code:
HTML Code:
Sub aaanewa()
Dim lRow As Long, c As Range
lRow = Cells(Rows.Count, "D").End(xlUp).Row
For Each c In Range("D1:D" & lRow)
If c.Value > "" Then
[Code]...
To include this:
HTML Code:
With Selection.Borders(xlInsideHorizontal)
.LineStyle = xlContinuous
.ThemeColor = 1
.TintAndShade = -0.14996795556505
.Weight = xlThin
End With
so i can change the color and size of border
I've used Group Boxes to isolate some Option Buttons. I would like to remove the line border of the Group Box, but I don't see a way to format it.
View 2 Replies View RelatedI need to underline certain cells based on the value of a cell in this case from column "E". Right now I run a macro to look at the value in each cell in column "E". THe macro then adds a certain amount of blank rows below the that row. So, if cell E1 has a 4, my macro runs a calculation that says 4 divided by 3, +2. So it would add 3 blank rows under row 1. It does this all the way down my column of data.
Now it gets tricky. To the right of column E, I have 6 blank columns, F,G,H,I,J,K. F,H, and J are spacer rows with no data. I need them blank with out any borders. Columns G, I, and K are the columns that I am wanting to add borders on the bottom of the cells based on the value in column E.
I need code to look at the value in E1, in this case 4, and add borders to 4 cells, in this case G1, I1, and K1 and then G2. If the value would have been 5, I need I2, 6 would add a border to K2 and 7 would add a border to G3. Catch my drift?
So, every cell in column E will not have a value because of me adding blank rows. So when there is a value, I need to add borders starting on the same row the value is in. At most, there will only be 3 underlined cells per row because of the format. Once the top row is filled, I need to drop down to the very next row.
I'm trying to use VBA to draw a border using the drawing toolbar and using the line. i need it to draw a border around a select area i hightlight.
i have attached a example below, but not sure if it will appear.
I am trying have the macro go from H7:H300 and if the value in the cell is "Grand" the I need it to border the top, right, and bottom. Not the left side and then keep going until all cells are checked.
View 1 Replies View RelatedI have a spreadsheet with DDE formulas in the cells. When the contents of any cell changes I want to DRAW A BORDER (NOT CHANGE THE BACKGROUND COLOR !!) AROUND THE CELL .. When another cell's value is updated I want to REMOVE the border which was around the"OLD" cell and now place a border around the most recently changed cell, etc.
Only the newest active cell should have a border around it !!!
part of my code looks like this. Instead of it being if c.interior.colorindex i want it to be if top border color = 4.
How do i syntax this?
For Each c In Worksheets("Sheet1").Range("B7:DE7").Cells
If c.Interior.ColorIndex = 4 Then Range("DH7").Value = Range("DH7").Value + c.Value
Also, is there a way to specify Range("DH") and make the row be the current row, not hard coded to 7
What I'm really looking for is to box in data as the data changes using the border feature.
Column A would contain the data to look at however there may be additional data in columns B, C, D and so on that would need to be "boxed in" with the group of like data.
I can't get the HTML to work so we'll have to go sans spreadsheet on this one.
I'm trying to conditional format a cell that contains a formula that when the formula returns anything other than "" the cell contains a border.
My formula within the cell is referencing another worksheet
=IF(Sheet1!A1="","",Sheet1!A1)
Ideally the formula within the conditional format would be
=NOT(ISBLANK(Sheet1!$A$1))
but it isn't possible to reference another worksheet within a conditional format.
Is there any chance to draw page borders in excel like ms word
i have huge data around 450 pages for which i want to set page border
as per my knowledge i have to select each page and set the border
which is taking lot of time.
instead of this is there any option to set page border
I have a spreadsheet of data, and all entries are grouped by different unique reference (three digit number). I need something in VBA so if the the unique reference in the columns are the same, to place a border over the ammending data. The actaull; spreadsheet is sorted ascending by the unique references so all the entries are already grouped together. EG - So if I ran the code it would put a border around the group of rows for unique reference 126.
Unique reference
126
126
126
126
128
128
I attempted using if activecell offset, but i dont think the logic works. I ran a macro for the border, it is below.
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With.........................
I am trying to have a border drawn around a group of cells. This group of cells changes per list I make, but only the height changes. The width is always the same (from column A to column J) and the top is always at row 5. Only the last row changes. How can a border be drawn around this group of cells no matter the size of the group of cells? Below is the macro I have written so far.
Cells.Select
Cells.EntireColumn.AutoFit
ActiveWindow.SmallScroll ToRight:=7
Columns("K:N").Select
Selection.ClearContents
ActiveWindow.SmallScroll ToRight:=-7
Range("A2").Select
Rows("2:2").RowHeight = 49.5
lastrow1 = Range("A65536").End(xlUp).Select
Range("A5:J" & lastrow1).BorderAround.Weight = xlThin
lastrow2 = Cells(Cells.Rows.Count, "C").End(xlUp).Row
For I = lastrow2 To 2 Step -1..........................
I have a picture that has been inserted into a worksheet via a macro and I have a number of macros to increase and decrease size. They work fine.
However, whenever I run one of those macros by selecting a button on the worksheet, it results in a border around the picture.
Facts:
- worksheet is called "Admin"
- picture is called "ClientLogo"
- Line.Weight set to "0" or "False" or "xlNone" or removed all result in a border
Question: Code / syntax for removing or setting the border to nothing?
VB:
Sub ReduceShape()
Dim shp As ShapeRange
On Error Goto NoSelectionMade
Sheets("Admin").Shapes("ClientLogo").Select
Set shp = Selection.ShapeRange
[Code]...
I'm trying to create a border for a range using R1C1 and get an error.
VB: Sheet11.Range(Cells(y, 1), Cells(y, 5)).BorderAround Weight:=xlThin
If I do not use R1C1 it works...
VB: Sheet11.Range("A18:E18").BorderAround Weight:=xlThin
I have a list that, how do i create a border that data contains formula (formula not display/blank)...
i want to create dynamic border with condition if data display/showing must be border shown too...
for this, i want to line "TOTAL" in column AD expands up, based on data display/showing...
note : in cell AF2 as parameter/controller to show data by month (type 2 instead February or 3 --March etc...)
I have an extensive spreadsheet with several columns and all showing borders where each cell/column begins and ends. However there are a few cells where the break with the next cell does not show the line.
I have highlighed the cell in question, gone to format/cell/borders and everything looks fine. Black color + format border shows square with all sides of square showing.