My goal is following:
I do an inventory of my schools equipment and have much info in many columns. But I just want to concentrate on column A.
This is example of the room names at my school and look like this:
Column A
A01
A01
A02
A02
....
I have the table, as shown on left in the appended image, and the final result should be the right one.
The steps are written as 1, 2, 3 and 4.
Untitled.png
I have a worksheet which contains 2 columns which is needed to work my problem.
Unique Work ID and Description
The unique work ID are the same for each description, but there are up to 5 different description associated with each unique work id.
I'm looking for an automated process but where to start to convert the 5 rows in the unique row and 5 column for the descriptions
I have a dynamic table (rows regularly added or deleted) that is generated automatically based on choices made by the user in another worksheet. I need a function that will examine all the cells in one column, and when it finds a difference between two cell entries, it will change the border between these two entries to dark (medium weight), and then extend this border across the table. The end result should be that wherever the cell contents differ within a column, the table is divided by a darker border across the entire row.
View 9 Replies View RelatedThere are groups of similar ID numbers in Column J. For a group of similar ID numbers in consecutive rows there is only one row that has a number greater than 0 in its Column L cell and the rest of the cells of Column L for that set of similar IDs is filled with 0s.
First for that unique ID group I need to find out which row is it that has a value greater than zero in its Column L cell.
Then I need to use that value to fill the rest of the 0s in Column L corresponding to that set of Unique IDs.
The process continues with identifying similar IDs in Column J and this time doing the same thing for their Column M. I have attached a sample file that shows the data and how the results need to look like.
Here's how my daily report is currently set up:
ExternalInternalDifferences
123000123000
234564234564
345456345456
456567378987
565456456567
654547524564
788879565456
865478654547
745654
788879
865478
The External column contains data provided by an external vendor. The Internal column contains data compiled internally. The data in the Internal column will always contain data duplicate to the External column, but will also contain unique data not present in the External column. I would normally cut out the data contained in Internal column that is not duplicated in the External column, and paste it into the Differences column, and move the remaining cells in the Internal column up. The result would be the External column data and Internal column data would align by row, and the data unique to the Internal column is segregated to the Differences column, like so:
ExternalInternalDifferences
123000123000378987
234564234564524564
345456345456745654
456567456567
565456565456
654547654547
788879788879
865478865478
While not a difficult task for 8 rows of data, the actual daily report contains over 1000 rows, on average. I would like to set up a template workbook, where I can simply open the template workbook, paste the data into both the External and Internal columns, then have the values that are unique to the Internal column extracted from the Internal column and inserted into the Differences column.
The end product would be used daily, with differing amounts of data (from 100 rows to 10,000 rows).
In an excel sheet i have around 10 columns.
I filtered the data based on the column1 using vba. Then after that, the filtered data in column2 have repeat finance accounts. What i need to find the unique finance accounts under the column2.
Is there any methods to find the unique value under the column2?
I'm stuck on the final piece of my macro project. I've attached a workbook with two sheets: sheet 1 is what I currently have, and sheet 2 is what I'd like my report to look like when complete.
On Sheet 1:
- column B is called Supervisor Name
- Columns D-O are months of the year, with either a Yes or No in each cell.
I'd like to write a macro that will:
- Take all unique values in Supervisor Name column, and paste these Above the current table.
- For each Supervisor, and each month, I'd like it to calculate, as a %, the number of Yes mentions in each month divided by the total cells (Yes/(Yes+No)).
Sheet 2 contains the output, in the format I'd like to see it.
Sheet 2:
Supervisor Name
October
November
December
Supervisor 1
8.3%
[Code] .......
I have some 8000 rows of data consists of a survey.
I need to find out TOPPERS of each SUB_CODE which are available in a single column.
I have clearly mentioned the problem and the solution required in the attached workbook.
After using Copy/Pastespecial in my macro, when it completes I have the flashing border around the range that was copied, (like you do when you do it manually).
What line of code do I need in my macro to make this go away?
I have a wookbook with serial numbers in column A and barcodes in column B. There are 51940 rows in total.
Is there a way I can search through column A, and for each unique value found , concatenate all of the barcodes that relate to that serial number in column C?
Serial Numbers | Barcodes | Combined Values
-------------------------------------------------------
abc123 abc12300 abc12300,abc12301, etc etc
abc123 abc12301
def456 def45600 def45600, def45601, etc etc
ghi789 def45600
i am using Excel 2010.
I have the file here i work with, basically the first column is a legend and the column to the right of it is a pointer column to help me find out where a legend is located in another file. So i was wondering if a macro could be made to basically find where the "legend column" A, C, E ect ends ( every other column is a legend column , one next to it is a pointer column ). and then combine the ends all of the columns contents and put them into 1 column.
In the file with this question i have showed you what i start off with, i highlighed in yellow where each column legend ends, ( normally these are not highlighted and i find them manually ). In the 2nd tab i show what the end result should be. All the columns are now consolidated into 1 column. 1 after the other.
Is it possible to modify the attached code so that it will copy bold text and border as shown in attachment sample1 and paste in sheet Shop. Currently the code just copy's and pastes without bold text and borders.
Sample1.PNG
Is it possible to use a FindFormat to find a Border(xlDiagonalDown)?
If so can you please show me the code to do so.
Example
Sub Find_F()
Dim e As Range
Dim r As Range
Dim c As Range
Dim lCount As Long
Dim strFirstAddress As String
Set e = Range("A1:A6")
With Application.FindFormat.Font
.Bold = True
.Italic = True
.Size = 16
End With
Currently there are 3 sheets in my wbook, however there are likely to be 30 or so soon enough. Each sheet has loads of Cols of data and no sheet is generally the same.
I'm after my "Control" sheet to display a replica of the columns entitled "Destination" found in all other wsheets. i.e. each sheet has a destination col and I need an automated way of getting these lists side by side.
The challenge I'm faced with is that the destination col in each sheet is never usually in the same column, i.e. sheet1 could be colA, sheet2 colB etc and each sheet might contain more than one destination col,
whats the most effiecient way to find all values under column B2 and all values in column O2 and paste them in column U2?
View 9 Replies View RelatedThe idea is that i have several monthly data in columns. I also have a subtotal column that can be a "Total Trim I", "Total Trim II", "Total Trim III" or "Total Trim IV". I also have a yearly total: Jan Feb Mar Total Trim I Apr May Jun Total Trim II Total 2005
I wanna cut the "Total Trim I" column, paste it after the Yearly Total and cut and paste the "Total Trim II" after the "Total Trim I" column for every year... It'll look like this: Jan Feb Mar Apr May Jun Total Trim I Total Trim II Total 2005. But not every trimester has 3 months... I've been thinking about a find function but i have troubles with the implementation.
how does one go about finding a specific valuein a worksheet, then selecting the value in the next column, then pasting the value in a different worksheet?
For example, I want to find a particular person's name in a worksheet, upon finding the name, I want to select the number associated with the person which is in the column to the left of the name. I then want to copy and paste the number in a different worksheet.
I have a report where I would like to have a macro search for a date string in columns N-S and copy the date to Column C, same row. The number of rows will vary from day to day. I would then like to format all of Column C to 'mm/dd/yyyy'.
Attached is a file where the date string is included in Column N on row 2 and Column O on the row 3. The dates for both these lines would need to be copied and pasted to their respective rows in Column C.
i try to paste in active cell copied range.
I mean that i do follow:
- i select range of cell - mostly range of column f.e. A2:A500
- i click/select on any free cell (f.e. B1)
- then i run macro
i expected it paste unique values (text or number)
this dont work
i dont know how defined the range
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
1. For a file moving from one cell to the next, down the column, get the values and seach for the values in file number two.
2. If that value is found, copy a cell from file 1 to a cell of a column on the same row where the value was found on.
3. Do what was done on number two, but with a different column.
this is what i have so far...
Sub replace()
'
' Macro2 created by david
'
' for the entire sheet, moving from one cell to the next down the column, changing rows
' search for the contents in another sheet, and then if that is found,
' copy the row number to a variable, and then
' copy column K from sheet 1 to column N of sheet 2, using the same variable above
' after that same, but L goes to P.
'
'
Windows("file1.xls").Activate
Rng = Selection.Rows.Count
Dim toFind As String
ActiveCell.Offset(0, 0).Select
Application. ScreenUpdating = False
Dim i As Integer
For i = 1 To Rng
Windows("file1.xls").Activate
toFind = Range("A + i")
Windows("file2.xls").Activate
I have a workbook that has 397 sheets. On many of the sheets (but not all) they have some of the same data. On sheet 1 cell B5 is ContactID, Sheet 15 cell B32 is also ContactID. Sheet 1 A5 needs to reflect Contact ID and Sheet 15 A32 needs to reflect Contact ID. I need to find all sheets that contain the data "ContactID" and place (paste?) Contact ID in the same row, but in Column A.
Right now I am doing a Find all and clicking through the sheets 1 at a time (some of these finds though have 30+ sheets).
For a table like the one below produced for the sake of example (actual is much much bigger) I want to make it list rows that are true for a certain column for a certain variable in the matrix. So for say water terrain, which types of activity can I do i.e. swimming. Or for Offroad the activites which I can't do i.e. Run and Swim.
ActivityWaterRoadOffroad
Jog nym
Run nyn
Walk nyy
Swim ynn
y=yes
n=no
m=maybe
I need to find the last instance of "IO" in column E and copy cells in columns B to E for the row below to another tab called "OP" cell O9.
I need the VBA code for Excel 2003.
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
I've got it mostly figured out (I thought), but Excel doesn't like something about the code. I'm using Office 2010. When it tries to run the second line of this code, I get a 438 error:
Code:
Selection.Characters(83, Len(Selection) - 82).Cut
I need to copy a couple cells from sheet2,3 and 4 to sheet1 depending on value of cell a2 of respective sheets.
I have the basic code here, and what I think I'm missing is the adding row in sheet1.
The below codes can be all wrong by the way, YES, I do not have much knowledge in Macro.
[Code] .....
I am looking for a macro that will copy the text-based contents of a random cell in the range B100:B135 to a callout text box. The name of the callout is Autoshape 13. The callout should be cleared before pasting the contents of the next random cell into it. This macro will be assigned to a button.
View 5 Replies View RelatedI would like to draw the border for the cells with in the usedrange from column A to BM.
I have the below code, that I was using to border the column D alone.
When i change the range from "A:BM", i dont get the intended output.
Can somebody tell, what modification, I should do to get the desired output?