Does any know of excel code to know what know what kind of border it is. I converted a pdf file and now the data are on excel and there are borders and it looks to me like it is border with thickness of medium but when I run a code I produced and mark X to the column next to it to show that it is that border it gave me X on all the rows and so the medium thick border is excel grid without any borders.
I have a spreadsheet that has a lay out like below
A A A
* A A
* A A
B B B
* B B
* B B
and so on where every letter is a new cell and * = empty cell
I need a peice of code that will highlight all of section A. Section A could have 1 row or an infinate number of rows.
What I need is like a peice of code that means that it will start selecting rows starting from "A3" which is the 1st cell with data and stop selecting rows when the next row has data in the A column.
I have a drop down list that shows phrases for different math functions, like "divide by 2," "divide by 4," divide by 8," etc. When one of these items is selected, I want it to perform that specific calculation on a range of nearby cells.
However, I also want the user to be able to see the original value of the cells if they select "show original value" from the drop down list.
I have attached a workbook as an example. I think macro would probably work best.
oz_list_math.xlsx
I need to populated a specific range of cells based on a value of any kind in a header cell. Attached is a sample of the end results. Please remember each header cells needs to determine what happens the range of cells below the header cells.
View 3 Replies View RelatedBackground: I have 3 lists. List 1 is a column of unique identifiers. List 2 is a column of unique identifiers. List three is supposed to contain as many rows as the number of rows in List 1 * the number of rows in List 2. Each row in List three has as its unique identifier a value from List 1 concatenated with a value from List 2.
What my problem is: I want to determine, when looking at each row in list 1, if there is an corresponding entry in list 3 for every row in list 2.
The below code adds a line to the next blank row. I would like to add a border to this row that the values are going into. Columns "A:G"
Code:
Private Sub CMD_Add_Click()
Dim rNextCl As Range
Set rNextCl = Worksheets("Main").Cells(Rows.Count, 2).End(xlUp).Offset(2, 0)
Worksheets("Main").Activate
rNextCl.Select
Dim iRow As Long
[Code]....
I am after a bit of code which find a value in a cell "Grand Total" it may not be a the last row
Then finds the last column in the row and puts a border around the whole range.
I have a list (approx 2000 rows). I'd like to put a seperate border around any duplicates that are in the fourth column. If there isn't a duplicate then the regular gridlines are fine. I'd only like the first four columns to include this border. Is there a way for excel to automatically place borders around duplicates? Here is an example of what I have and what I would like it to look like.
View 9 Replies View RelatedBelow a small example with the borders as they should be. How do i get a macro to put the borders automatically, depending on the similarity of the cells in column B ? Note the blanc column with the borders should be made automatically as well. Second problem: the minimum height of a "border" should be 34pixels as in the example so you can write something in there after printing the sheet.
View 9 Replies View RelatedThere was also another bit of code which added a border around the selected text.
It got stuck on this:
With Selection.Borders(xlInsideHorizontal)
.LineStyle = xlContinuous
.Weight = xlThin
.ColorIndex = xlAutomatic
End With
The problem was that there was no Inside Horizontal if there was only one row. I had to chage my code to include a header as well as any selected rows - giving me the two row minimum required. This does the job for now - I'll have to give it some thought on how to get around the problem without the extra header though.
I have seen spreadsheet where the user has made the outline of the cell border non-visible. This seems like a fairly simple task, but I can't seem to find out how you format this type of border.
View 2 Replies View RelatedI am using Excel 2007. One of my worksheets has a dark border around some cells. Instead of being blue the lines are black. I used the right click and format cells option but it does not work.
View 10 Replies View RelatedBottom border each page,
View 9 Replies View RelatedWhen I enter data (digits) into a cell, its left border
becomes thinner ! Where is the connection between format and content ?
Creating border in different size at single attempt. Example as shown in the picture.
Excel Format.jpg
How can I modify this code:
HTML Code:
Sub aaanewa()
Dim lRow As Long, c As Range
lRow = Cells(Rows.Count, "D").End(xlUp).Row
For Each c In Range("D1:D" & lRow)
If c.Value > "" Then
[Code]...
To include this:
HTML Code:
With Selection.Borders(xlInsideHorizontal)
.LineStyle = xlContinuous
.ThemeColor = 1
.TintAndShade = -0.14996795556505
.Weight = xlThin
End With
so i can change the color and size of border
I've used Group Boxes to isolate some Option Buttons. I would like to remove the line border of the Group Box, but I don't see a way to format it.
View 2 Replies View RelatedI need to underline certain cells based on the value of a cell in this case from column "E". Right now I run a macro to look at the value in each cell in column "E". THe macro then adds a certain amount of blank rows below the that row. So, if cell E1 has a 4, my macro runs a calculation that says 4 divided by 3, +2. So it would add 3 blank rows under row 1. It does this all the way down my column of data.
Now it gets tricky. To the right of column E, I have 6 blank columns, F,G,H,I,J,K. F,H, and J are spacer rows with no data. I need them blank with out any borders. Columns G, I, and K are the columns that I am wanting to add borders on the bottom of the cells based on the value in column E.
I need code to look at the value in E1, in this case 4, and add borders to 4 cells, in this case G1, I1, and K1 and then G2. If the value would have been 5, I need I2, 6 would add a border to K2 and 7 would add a border to G3. Catch my drift?
So, every cell in column E will not have a value because of me adding blank rows. So when there is a value, I need to add borders starting on the same row the value is in. At most, there will only be 3 underlined cells per row because of the format. Once the top row is filled, I need to drop down to the very next row.
I'm trying to use VBA to draw a border using the drawing toolbar and using the line. i need it to draw a border around a select area i hightlight.
i have attached a example below, but not sure if it will appear.
I am trying have the macro go from H7:H300 and if the value in the cell is "Grand" the I need it to border the top, right, and bottom. Not the left side and then keep going until all cells are checked.
View 1 Replies View RelatedI have a spreadsheet with DDE formulas in the cells. When the contents of any cell changes I want to DRAW A BORDER (NOT CHANGE THE BACKGROUND COLOR !!) AROUND THE CELL .. When another cell's value is updated I want to REMOVE the border which was around the"OLD" cell and now place a border around the most recently changed cell, etc.
Only the newest active cell should have a border around it !!!
part of my code looks like this. Instead of it being if c.interior.colorindex i want it to be if top border color = 4.
How do i syntax this?
For Each c In Worksheets("Sheet1").Range("B7:DE7").Cells
If c.Interior.ColorIndex = 4 Then Range("DH7").Value = Range("DH7").Value + c.Value
Also, is there a way to specify Range("DH") and make the row be the current row, not hard coded to 7
What I'm really looking for is to box in data as the data changes using the border feature.
Column A would contain the data to look at however there may be additional data in columns B, C, D and so on that would need to be "boxed in" with the group of like data.
I can't get the HTML to work so we'll have to go sans spreadsheet on this one.
I'm trying to conditional format a cell that contains a formula that when the formula returns anything other than "" the cell contains a border.
My formula within the cell is referencing another worksheet
=IF(Sheet1!A1="","",Sheet1!A1)
Ideally the formula within the conditional format would be
=NOT(ISBLANK(Sheet1!$A$1))
but it isn't possible to reference another worksheet within a conditional format.
Is there any chance to draw page borders in excel like ms word
i have huge data around 450 pages for which i want to set page border
as per my knowledge i have to select each page and set the border
which is taking lot of time.
instead of this is there any option to set page border
I have a spreadsheet of data, and all entries are grouped by different unique reference (three digit number). I need something in VBA so if the the unique reference in the columns are the same, to place a border over the ammending data. The actaull; spreadsheet is sorted ascending by the unique references so all the entries are already grouped together. EG - So if I ran the code it would put a border around the group of rows for unique reference 126.
Unique reference
126
126
126
126
128
128
I attempted using if activecell offset, but i dont think the logic works. I ran a macro for the border, it is below.
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
With Selection.Borders(xlEdgeLeft)
.LineStyle = xlContinuous
.Weight = xlMedium
.ColorIndex = xlAutomatic
End With.........................
Is it possible to use a FindFormat to find a Border(xlDiagonalDown)?
If so can you please show me the code to do so.
Example
Sub Find_F()
Dim e As Range
Dim r As Range
Dim c As Range
Dim lCount As Long
Dim strFirstAddress As String
Set e = Range("A1:A6")
With Application.FindFormat.Font
.Bold = True
.Italic = True
.Size = 16
End With
I am trying to have a border drawn around a group of cells. This group of cells changes per list I make, but only the height changes. The width is always the same (from column A to column J) and the top is always at row 5. Only the last row changes. How can a border be drawn around this group of cells no matter the size of the group of cells? Below is the macro I have written so far.
Cells.Select
Cells.EntireColumn.AutoFit
ActiveWindow.SmallScroll ToRight:=7
Columns("K:N").Select
Selection.ClearContents
ActiveWindow.SmallScroll ToRight:=-7
Range("A2").Select
Rows("2:2").RowHeight = 49.5
lastrow1 = Range("A65536").End(xlUp).Select
Range("A5:J" & lastrow1).BorderAround.Weight = xlThin
lastrow2 = Cells(Cells.Rows.Count, "C").End(xlUp).Row
For I = lastrow2 To 2 Step -1..........................
I have a picture that has been inserted into a worksheet via a macro and I have a number of macros to increase and decrease size. They work fine.
However, whenever I run one of those macros by selecting a button on the worksheet, it results in a border around the picture.
Facts:
- worksheet is called "Admin"
- picture is called "ClientLogo"
- Line.Weight set to "0" or "False" or "xlNone" or removed all result in a border
Question: Code / syntax for removing or setting the border to nothing?
VB:
Sub ReduceShape()
Dim shp As ShapeRange
On Error Goto NoSelectionMade
Sheets("Admin").Shapes("ClientLogo").Select
Set shp = Selection.ShapeRange
[Code]...
I'm trying to create a border for a range using R1C1 and get an error.
VB: Sheet11.Range(Cells(y, 1), Cells(y, 5)).BorderAround Weight:=xlThin
If I do not use R1C1 it works...
VB: Sheet11.Range("A18:E18").BorderAround Weight:=xlThin
