I have two columns (one is mean and the other is max) and the third column, I have the corresponding letter. I have in total 5 rows with mins and maxes and corresponding letters. I want a function that when i put for example #3 on cell D9, then my cell E9 will spit out the corresponding letter.
See the attachment : find the corresponding letter.xlsx
I have a spreadsheet that monitors whether I have visted a learner in a given month.
I want to have a cell that displays "Yes" if I have visited the learner and entered a V in any of the 31 (July) cells in the row.
I have tried =IF(COUNTIF(g9:g31,"V")>0,"Yes","NO") with no success.
not sure if it i relevant, but the sheet I am using has been formatted as a Table (just to allow alternate light and dark rows).
When I type a single lower case letter into a cell, what formula or conditional formatting should I use to always convert it to a capital letter automatically?
View 9 Replies View RelatedFor the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I'm trying to have text in a specific column output a letter, only if every cell in a range of 4 contains the letter Y (yes). Using IF/SUMIF formulae I have managed to get he final cell to output the text, but it does it if ay one of the range of four cells contains the data, not all of them, which Is what is desired.
View 9 Replies View RelatedI don't know what formula to use to do the following:
In Column E there are cells which contain numbers which fall between 0 and 400. What I am trying to do in column F is show the a letter (E, D, C, B, A, A*) if the number in column E fall between a range.
For example:
If column/row E2 is between 160 and 199 it equals E, if column/row E2 is between 200 and 239 it equals D, if coulmn/row E2 is between 240 and 279 it equals C etc etc....
I have a formula that counts all instances of the letters a, b and c in a range and assigns them a value of 1 unless they are in the M column in which case a, b or c counts 4.
=SUM(COUNTIF(J2:AB2,{"a*","b","c"}),OR(LEFT(M2)={"a","b","c"})*4)
This worked well but now I need to modify the weightings across this range. My new goal is to count all instances of a,b and c in the range J2:AB2 but have M column a,b, c's = 2 and N:R column a,b,c's equalling 4. Letters other than a,b or c count as 0.
Example:
J2...K2...L2...M2...N2...O2...P2...Q2...R2...
A....B.....B.....C.....B.....D....B.....C.....E
the output of the above sequence should be
1+1+1+2+4+4+0+4+4+0 = 21
I need to compare for each trip whether there is a trip with Es and no Es in it and mark every line in column E with tag "Mixed Use". In the data below trip 2 has mixed use. I have attached a sample file.
Trip Employee EntertainmentMiles
Trip 1Employee 1E827
Employee 2E0
Employee 3E0
Employee 4E0
Trip 2Employee 1758
Employee 20
Employee 30
Employee 40
Employee 50
Employee 60
Employee 70
Employee 80
Employee 9E0
Employee 10E0
Is there an easy way (without writing my own conversion function) to get the column letter from a range object, as opposed to the column number?
View 5 Replies View RelatedListed below are the grades for a student. Some columns have blanks. I have to find the highest grade (A being the highest) in the range.
I'm going up with the opposite (F) with this formula:
=CHAR(MAX(INDEX(CODE(A22:M22&CHAR(1)),0)))
How do I get A?
I'm using Excel 2007
A
B
C
B
D
E
A
A
B
F
I need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
I am having troubles finding a row number, using it to specify a range and then counting the cells containg values in that range.
This is what I have
Code:
Private Sub TextBox1_Change()
Dim test1 As String
Dim FoundRom As Range
Dim i as String
Dim abc1 As Range
Dim Core1 As String
test1 = TextBox1.Value
[Code] ........
I am thinking that I have my "Dim"'s wrong or something but I cant figure out how to define the range including the found row number and then count the number of cells containing data within that range...
I have attached xl sheet for ref.
I have value in E2(5),F2(10)=G2(5[sub of F2-E2])
I need to find E2(5) value in B2:B21 and the same of F2 also
After finding that
(eg): E2 value 5 present in B6 cell and it should come to c6 cell same of F2 also
Now It should select C6 to C11 cells.(ref of B6 to B11,ie,5 to 10)
I tried in vba and formuals but i couldnt find solution.
I am working on a spreadsheet for work, and have managed to do everything I need to so far but I need to colour specific letter strings, certain colours within a range of cells (each letter string will only appear once on each sheet)
The strings I will be looking for vary depending on data entered so I will need to cell reference them
The strings that need colouring are in cells with other strings that must stay black (They cannot be separated from other strings due to the nature of the grid)
I need some strings red, some green, and some blue.
These changes should also apply to the whole workbook not just one sheet.
Is there a way to do this with the VBA code.
Book1.xlsx
I have two sheets of data and two tables (1=finial 2=data comparison) I am trying to figure out some kind of formula or vba that can easily tell me that the location point in table one data comparison matches the location in table two. The VPMDFS (location footage) in table two or NDE data can be a range, say vpmdfs.NDE + or - 3 ft. so the ILI or source record should fall in between this range. Once the match has been made I need to copy and paste that record onto sheet one all in the same row. I have been scratching my head and researching for weeks and cannot come up with a simple solution. My problem with all the scenarios that I've tried is the formulas what the data in the data comparison sheet to already be in the same row. Please reference my attached work book for examples.
I want to be able to find all the 0 differences (i.e debit = credit) cut that group out of that sheet and paste it to a new sheet in the same workbook. I have the code to find the 0 difference but I don't know how to select the range that makes up that difference and cut and paste it to a new page.
View 2 Replies View RelatedI name a range "MyList".
In another cell, I use Data.Validation.List and use "MyList" as the source.
Now I find another range named "HisList". Is there some way to determine if "HisList" is being used as a source for some other validation somewhere in the workbook?
"Trace Dependents" doesn't work.
If i have a range, lets name it "Names" and i want to find if the name
George is in that range, what formula should I use?
The data I need is in the middle of the worksheet (A16:B41), is there way to define the range so that excel only looks at that range and finds the last row of data?
Code:
Worksheets(i).Activate
lastRow = ActiveSheet.Columns("A").Find("*", SearchDirection:=xlPrevious, SearchOrder:=xlByRows, LookIn:=xlValues).row
Range("A16:B16" & lastRow).Select
Selection.Copy
Sheets("difference Check").Activate
[code]....
Is there a property to, given a certain range, return the name of the range?
I have used the name property and gotten a name in the form worksheet!address, but I am trying to return the name that I have given the range.
I was planning on using:
'returns the name if it exists, else returns ""
Function findName(myRange As Range) As String
Dim name As name
For Each name In ActiveWorkbook.names
If name = myRange.Address Then
findName = name.NameLocal
Exit Function
End If
Next
findName = ""
End Function
However, this code isn't working because when comparing name to myRange.Address, name includes the worksheet that the range is on, but myRange.Address doesn't.
Even if I get the above code to work, it will take quite a while because I have many names in my worksheet, and would be running the findNames function many times
=IF(COUNTIF('Deal Calculations'!E4:E30,"Pandy Mandy"),'Deal Calculations'!B4,"£0")
Above is one of the formulaes that I am using and I tried editing, to no avail.
Anyway here it is, I need to search E4 - E30 for a particular name, lets say Pandy. Now if pandy is found, then a cell on another tab has to equal a cell which is 2 cells on the left. from which the cell which contains the name is located.
here is a psuedo version of it...
Search E4-E30 Find a cell which contains 'Pandy' If pandy is found, 2 cells to the left then a cell on another tab is equal to that.
So I have multiple columns of numerical data,
I have to find the sum of all numbers between 10 and 40 within a column, NOT cell 10 to 40 but the actual number 10 and 40.
How do I do that?
Is it SUMIF? I cannt seem to grasp this.
I currently am working with a worksheet that has over 250,000 data points. It is a spreadsheet for a company in which different work order are organized. A given work order can have several parts (ranging anywhere from one component to 40ish) and thus the height of the cells in which each specific work order is placed differs from work order to work order. For each component, the spreadsheet tells you how many can currently be made based on the materials available. What I would like to do, for each specific work order, is go through the data and simply tell whether or not the work order can be completed (the quantity of each specific component needed is also given in the spreadsheet) and then report out exactly how many components can be made.
Ultimately, this means that a "limiting factor" analysis must be done. For instance, if the work order is asking to create plastic bottles that consist of the bottle, the cap, and the label and it asks for 3 bottles but only 2 caps are able to be made, the limiting factor would be the caps and thus only two bottles could be made and the work order could not be fully completed.
The spreadsheet is set up based on another worker here, I am just trying to come up with a way to analyze it. Cells A1:Axxxxx are the work order numbers and the size of these cells differ because they are merged to fit the number of components they have. The componenets available are then ranged C1:Cxxxxx etc and the quantity needed are also listed in a similar fashion. What sort of structure could I use.
How can I determine what the bottom row is in a range in VBA? I have an SheetChange event sub that takes in Target as Range. I want to know what the first/last row/column is in the Range. So, for example, say the Sheet has values in A1:B5 and I paste over A1:B4. Target will be A1:B4. I need a method that returns 4. I tried Target.End(xldown).row, but that gives me 5 (since theres data in A5).
View 4 Replies View RelatedI have the code below which does work and looks up a piece of text in A1 (in this case the word exhaust) within the contents of column B. If the text is found (either part or whole) it returns a Y and if not an N in column C.
It works fine but I can't work out how to get it to repeat should I then want to look at a value in A2, A3 etc without removing any Y had Y already been displayed due to a prior word in the list. Below are the results I'd want.
Column AColumn BColumn CExhaustWheel inc TyreNClockClutchNPipeExhaust - SingleYExhaust - DoubleYWindowNFront ClockYDoorNSeatNBonnetNRear PipeY
Sub FindSomeText()
'Application.ScreenUpdating = False
Range("C1", Range("C65536").End(xlUp)).Clear
keyword = Range("a1").Value
Range("b1").Select
Do Until IsEmpty(ActiveCell)
If InStr(1, ActiveCell.Value, keyword) = 0 Then
[code]....
I know how to find the last row of a continuous range. it's simply:
Code:
someRng(someRng.Count).row
How do you find the last row of a non-contiguous range though? Assume the range is vertically laid out and I don't want to do any looping.
I want to apply Data Validation to a cell, so that only the following combination of letters and numbers can be entered.
Letter Letter Number Number Number Number Number Number Letter.
e.g AB123456C.
I am trying to update our sickness spreadsheet for work to make it a little more 'intuitive' and less cumbersome to use. There are dates (by day) accross the top, with staff names below. If someone is off sick, the manager writes the number of hours lost to sick in that day, under the correct day, then uses back color / font color to show its sick.
Our work uses a 3 periods of absence or more over a rolling 12 months and the staff are issues with a warning, same with over 8 days off sick. If they are off for longer than 14 days they are long term sick.
I would like excel to show whether each staff member has met any of those criteria in the last 12 months by either highlighting their name or putting text into an adjacent cell.
I have tried using offset, named ranges and anything else I could think of to automatically increase the range +1 day very day, but I cant !
Attached File : plan of staff for 2014.xlsx
I have a set of data that has repeating column headers. So, on a sheet called "January" I have "Forecast" and "Actual" headers that repeat over and over underneath "Week 1", "Week 2", etc. On a different sheet (called "2014"), I'm trying to write a formula that will produce the latest or rightmost number underneath the "forecast" header. What I want is to be able to input data into the "January" sheet every week so that I have a record of progress and I want the "2014" sheet to show the latest data for every month.
View 5 Replies View RelatedI have created the attached spread sheet to work out and calculate gp on products. Sheets and userform1 are working perfectly how ever userform2 wont load and I believe its something to do with the named range? The idea for this userform was to select a product from combobox1 and then change the price on sheet1 and clear the price on sheet 2 in the different sizes.
Also userform2 i would like to create it so that if any of the fields are left blank it wont change price of selected field in sheet 1 and wont clear selected area in sheet 2.
Finally is there a way on userform1 to shrink the userform size depending on how many sizes are needed?
Attached File : NEW GP CALCULATOR.xlsm