I have a spreadsheet that monitors whether I have visted a learner in a given month.
I want to have a cell that displays "Yes" if I have visited the learner and entered a V in any of the 31 (July) cells in the row.
I have tried =IF(COUNTIF(g9:g31,"V")>0,"Yes","NO") with no success.
not sure if it i relevant, but the sheet I am using has been formatted as a Table (just to allow alternate light and dark rows).
I need to change a few hundred cells (one column) where the first letter may be a capital letter to a lowercase letter.
So:
GetAwardfromBid to getAwardFromBid
or
SmallLertter to smallLetter
I am working on a spreadsheet for work, and have managed to do everything I need to so far but I need to colour specific letter strings, certain colours within a range of cells (each letter string will only appear once on each sheet)
The strings I will be looking for vary depending on data entered so I will need to cell reference them
The strings that need colouring are in cells with other strings that must stay black (They cannot be separated from other strings due to the nature of the grid)
I need some strings red, some green, and some blue.
These changes should also apply to the whole workbook not just one sheet.
Is there a way to do this with the VBA code.
I have two columns (one is mean and the other is max) and the third column, I have the corresponding letter. I have in total 5 rows with mins and maxes and corresponding letters. I want a function that when i put for example #3 on cell D9, then my cell E9 will spit out the corresponding letter.
See the attachment : find the corresponding letter.xlsx‎
When I type a single lower case letter into a cell, what formula or conditional formatting should I use to always convert it to a capital letter automatically?
View 9 Replies View RelatedFor the below formula is it possible to replace the B's (column location) with a cell Say Z146 which contains the letter B (or a number if thats easier and someone can tell me the numbers for each column).
When the formula is dragged into the next cell (down) it takes its column reference from Z147 and then my life becomes so much easier.
=IF(INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0))"",INDEX('Overs-Unders'!B:B,MATCH($C145,'Overs-Unders'!$A:$A,0)),"")
I'm trying to have text in a specific column output a letter, only if every cell in a range of 4 contains the letter Y (yes). Using IF/SUMIF formulae I have managed to get he final cell to output the text, but it does it if ay one of the range of four cells contains the data, not all of them, which Is what is desired.
View 9 Replies View RelatedI don't know what formula to use to do the following:
In Column E there are cells which contain numbers which fall between 0 and 400. What I am trying to do in column F is show the a letter (E, D, C, B, A, A*) if the number in column E fall between a range.
For example:
If column/row E2 is between 160 and 199 it equals E, if column/row E2 is between 200 and 239 it equals D, if coulmn/row E2 is between 240 and 279 it equals C etc etc....
I have a formula that counts all instances of the letters a, b and c in a range and assigns them a value of 1 unless they are in the M column in which case a, b or c counts 4.
=SUM(COUNTIF(J2:AB2,{"a*","b","c"}),OR(LEFT(M2)={"a","b","c"})*4)
This worked well but now I need to modify the weightings across this range. My new goal is to count all instances of a,b and c in the range J2:AB2 but have M column a,b, c's = 2 and N:R column a,b,c's equalling 4. Letters other than a,b or c count as 0.
Example:
J2...K2...L2...M2...N2...O2...P2...Q2...R2...
A....B.....B.....C.....B.....D....B.....C.....E
the output of the above sequence should be
1+1+1+2+4+4+0+4+4+0 = 21
I need to compare for each trip whether there is a trip with Es and no Es in it and mark every line in column E with tag "Mixed Use". In the data below trip 2 has mixed use. I have attached a sample file.
Trip Employee EntertainmentMiles
Trip 1Employee 1E827
Employee 2E0
Employee 3E0
Employee 4E0
Trip 2Employee 1758
Employee 20
Employee 30
Employee 40
Employee 50
Employee 60
Employee 70
Employee 80
Employee 9E0
Employee 10E0
Is there any way to name cells with same letter but different number?
e.g i need to name the first row A1 to A100.
I want to get rid of all these Q's that I already put in many consecutive cells in a column :/
Q2
Q5
Q3
Q10
Q6
Q1
Q7
(...continues)
So I just want to have numbers in these cells. Is there a good way to do that?
I have code I am writing where each cell contains 1 of 2 words in in various places of that cell all within column E. I need something to state: If E3 contains "apple" then write "A" in the cell. If E3 contains "Orange" then write "O".
View 2 Replies View RelatedIs there an easy way (without writing my own conversion function) to get the column letter from a range object, as opposed to the column number?
View 5 Replies View RelatedListed below are the grades for a student. Some columns have blanks. I have to find the highest grade (A being the highest) in the range.
I'm going up with the opposite (F) with this formula:
=CHAR(MAX(INDEX(CODE(A22:M22&CHAR(1)),0)))
How do I get A?
I'm using Excel 2007
A
B
C
B
D
E
A
A
B
F
how to make the cell be with fixed symbol or letter, means that one write 5 only as example then the cell will be 5m ??
View 3 Replies View RelatedI'am trying to add a row of cell that contain a letter befor the number
I need to add-up the numbers and ignore the letter
I am having troubles finding a row number, using it to specify a range and then counting the cells containg values in that range.
This is what I have
Code:
Private Sub TextBox1_Change()
Dim test1 As String
Dim FoundRom As Range
Dim i as String
Dim abc1 As Range
Dim Core1 As String
test1 = TextBox1.Value
[Code] ........
I am thinking that I have my "Dim"'s wrong or something but I cant figure out how to define the range including the found row number and then count the number of cells containing data within that range...
i need a formula for a sign in sheet for the academy i work at. we have night and day classes of the same sessions, in the planner they are listed as d1, d2 d3 and n1 n2 n3 and so on for each.
so basically im trying to create a formula to quickly ender the d1, d2, d3 ect into the cells on eachpage for the students to sign in for each day it works out to be about 190 calls and 9 diferent classes to you can see why id like to speed this up. problem is i need the number to change not the D and excel want to use the cell allocation.
as you can see from the document i have not attatched, i have created a formula to add in the dates automatically, i would like to do the same with the session numbers or the D numbers, this is one of the shorter courses and has about 190 days
Is there any way of writing a macro so that specific cells are formatted to start with a capital letter and end with a full stop. Can you also write a macro to automatically spell check specific cells?
View 11 Replies View RelatedI have names that look like this:
SmithJohn and i want to seperate into two cells so it looks like
Cell 1: Smith
Cell 2: John
I have 1200 doctor/patient records to input into an excel spreadsheet for import to an online EHR database. I can set up all the normal formulas and formatting but for the life of me not figure out how to create a custom formula to take the first letter of the patient first name and last name and add 6 figures to create a unique patient identifier.
ie. James + Smith+ random 6 figures = JS245318.
In my spreadsheet the first name is under Column 1, Last name Column 3 and the unique number generated in column 4.
Looking for VBA that can change the font size of "•" char(0149) within any string in selected cells.
Also looking to delete the last "•" char(0149) within any string of selected cells.
What would the syntax for these two functions be?
I want to apply Data Validation to a cell, so that only the following combination of letters and numbers can be entered.
Letter Letter Number Number Number Number Number Number Letter.
e.g AB123456C.
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
Is there a way I can stop a range of cells from recalculating once the cells in that range have a certain value?
I'm a complete newbie when it comes to any kind of programming and so...I'd need a little bit of handholding with this.
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data
I need to paste data of sheet2 start of row106 in sheet1
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.