Fix Color To Match Corrected Status
Jul 14, 2009
I've got a macro which corrects the status value in column U to match the first value for each identical value found in column A. The only problem is it does not fix/add the color index value for the corrected status values.
ammend the macro to allow the cell's color value to be corrected or added when the values in column U are fixed. I've attached an example sheet w/ macro included.
Column U shows the beginning state before the macro is ran. Column V shows what the results in column U are after the macro is run. Column W shows what U should be after the macro runs with a fix applied to it.
View 2 Replies
ADVERTISEMENT
May 12, 2014
I have some vba code that currently copies a status table out of a worksheet, into a temp file for an email. The status table in excel has a column D which can have different status. I want to select everything in the table except rows that are 'Descoped'. Currently my code looks like:
Set rng2 = Sheets("Execution Status").Range("B2:F420")
This picks up everything without looking at the status. I want to change it so it doesn't pick up the rows where Column D contains 'Descoped'.
In pseudo code I would describe it as:
Set rng2 = Sheets("Execution Status").Range("B2:F420") where value in D5:D420 is not equal to 'Descoped'.
I have tried:
Set rng2 = Sheets("Execution Status").Range("B2:F420").Value "Descoped" and nothing gets selected.
View 1 Replies
View Related
May 10, 2014
I get color item from comma delimited numbers..Here's a sample of what i'm looking for.
View 6 Replies
View Related
May 25, 2009
http://www.excelforum.com/excel-gene...-criteria.html target="_blank">Color Cells Which do not match criteria
i m having a problem similiar to the above.I tried using the nested ifs in Conditonal formatting but i m getting errors.Can anybody complete my formula
View 11 Replies
View Related
Dec 5, 2009
I’d like to be able to highlight ONLY the text as shown below based on the look up column. Conditional Formatting will highlight the whole cell, which is not what I want. Is this possible ?
Column 1 (Director)
director, Robert Rodriguez; producer, Elizabeth Avellan; producer, Robert Rodriguez; writer, Robert Rodriguez
Column 2 (Cast)
Cast: Leslie Mann, Kat Dennings, James Spader, Jon Cryer, William H. Macy, Jimmy Bennett, Leo Howard, Devon Gearhart, Rebel Rodriguez, Trevor Gagnon, Jake Short
Column 3 (Look Up)
robert rodriguez
james spader
View 4 Replies
View Related
Sep 30, 2013
My vlookups gives mostly #N/A in my full column, one or twice match with other sheet, so difficult to identify which one match in my lookup, i should watch carefully every time it will be matching or not, IS there any options when match it with formula then it appear highlight or color?
Or any options vlookup matching with original color and format?
See excel first sheet and second sheet : vlookup with identification.xlsx‎
View 6 Replies
View Related
May 10, 2012
I have 2 different worksheets...each of them containing item numbers. On Sheet1, Column A contains the item numbers. I have conditional formatting to change the interior color of column A based on several criteria.
On Sheet2, I also have item numbers, but they are located in Column B. If item 12345 in Column A on Sheet1 has an interior color of yellow, I would like that same item on Sheet2 to have an interior color of yellow.
View 7 Replies
View Related
Jun 20, 2012
I have some tabs that are color coded. What I want to do is:
1. Depending on the tab color on Sheet A, have it compare that color to a set of cell colors on Sheet B that have descriptors next to them,
2. vlookup the descriptor on Sheet B and
3. put the descriptor into cell A2 of sheet A
How I would go about accomplishing this?
View 1 Replies
View Related
Nov 18, 2013
I'm trying to format the color of a certain cell, if two values match.
A1=100
B1="Choose"
I want to format B1 to color RED, if A1=any number, and B1="Choose".
B1 contains list-data where you can chose from different values.
So if A1 contains a value, and B1 has not been set a different value than "Choose", format B1 to RED. Which would indicate that you have to set a value for the rest of the worksheet to work.
View 5 Replies
View Related
Jul 26, 2014
I've an excel table containing the list of expenditures of employee. I've to sort the table and use different colors for different employee rows.
How can I do this task using formula? Is this possible?
Please see the attached excel sheet for the sample table and desired output.
View 1 Replies
View Related
Feb 15, 2010
The purpose of the attached spreadsheet is to record whether or not my company has stock of each item, on every day. It currently works by doing a VLOOKUP in each cell if the date matches todays date which is generated by the formula on the TOTALS tab, cell I2. The current days stock levels are refreshed by a database query on the DATA tab and then totaled up on the TOTALS tab. The VLOOKUP formula returns the stock level and if we are out of stock then we are manually formatting the relevant cell on the REPORT tab red.
It has been suggested to me that there might be a way to do this via conditional formatting although I cannot work out how as once the current day changes to tomorrow then the formula in the previous cell no longer returns a value and the conditional formatting would return teh cell colour to white. Is it possible to automate this process using VBA so that whenever the sheet is opened (daily) then it will copy and paste special the relevant stock level for that day against the correct product?
View 5 Replies
View Related
Jan 29, 2013
I am looking to have the cells font color in each row match the color of the font in column D that will change depending on the info of the drop down box.
Sheet 2 is the one I am looking to work with as a test.
View 2 Replies
View Related
Dec 12, 2006
My macro works fine but I'm interested in seeing if I can speed it up. What I'm doing is starting at the bottom and comparing it with the row above and if they match in font color it will fill the top with orange and delete the bottom. This works but usually takes several minutes.
Public Sub ADMINCompareList()
Dim varTest1, varTest2
Dim lng As Long, i As Integer, iTest As Integer
Application. ScreenUpdating = False
Worksheets("ADMIN").Activate
For lng = ActiveSheet.UsedRange.Rows.Count To 2 Step -1
If Not Range("M" & lng).Font.Color <> Range("M" & lng - 1).Font.Color Then
Goto newrow
End If
varTest1 = Intersect(Range("J:W"), Rows(lng))
varTest2 = Intersect(Range("J:W"), Rows(lng - 1))
For i = 1 To 14....................................
View 3 Replies
View Related
Jul 20, 2009
Using the below table, I'm trying to do the following
I'll use row 3 as an example. I'm trying to creat a RAG status based upon the foloowing details
G- If D3 is under 30 days past D2
A- If D3 is over 30 days past D2
R- If D3 is over 30 days past D2, and todays date is over 30 days past.
ABCDE1Today:20.7.2009Stage due (planned date)Stage completed (actual) 2 1.2.200910.3.2009R3 1.6.200910.6.2009A4 1.6.200910.7.2009R5 1.7.200910.7.2009G
View 9 Replies
View Related
Aug 14, 2008
I have done the two obvious checks regarding my missing Status Bar, both in View and Options and still the Status Bar refuses to show itself. I have shut down Excel with the options unticked hoping that on restarting and ticking them the bar will re-emerge but still no joy and also done vice-versa. how to get the Status Bar to reappear?
View 5 Replies
View Related
Apr 29, 2009
Im forgetting how to code something for this ....
View 7 Replies
View Related
Aug 3, 2009
Circular: 02 in status bar. I got this message
View 2 Replies
View Related
Sep 2, 2008
Does anyone know of a site or some code that can make changes to add some items to the status bar calculations?
Such as right now you have Sum, Count, Count Nums, Max, Min... just to name a few.
I'd like to be able to add some other ones down there if it can be done. I'd like to count #N/A's or possibly sum only positive numbers? I can do it with a quick keyboard shortcut and message box with a macro, but I'd like to just be able to highlight a range and have it show up like sum or the others do.
Just thought I'd psoe the question.
View 9 Replies
View Related
Jan 9, 2009
in the status bar in the bottom left once the workbook is opened is want it to say
## Seconds Remaining Before Workbook Auto Closes
as for the ## I want it to countdown from 60 seconds
View 9 Replies
View Related
Dec 1, 2009
I have a worksheet that I use to track course scheduling. I have 5 columns which contain dates. At the end I have a Event Status cell that i manually update based on which of my 6 date fields are filled in. I would like to have the Event Status automatically fill with a word as I add dates to the 5 columns. If there is a date in columns 1,2,3, and 4 the event status cell would update based on the date in column 4, dates in columns 1 and 2 - the event status would update based on column 2, etc.
Here are my column headers and what the event status says if there is a date in that column, and no dates in any column to the right of it.
Notional Start Date - Not Contacted
Declined Date - Declined
Contacted Date - Contacted/Working
Scheduled Date - Scheduled
Completion Date - Completed
View 9 Replies
View Related
Dec 3, 2009
I have excel in the below format.
Sheet1 ABCD1NameDescStatusSpend2raviGood boy1103kumarAve3104raviGood boy1205raviGood boy2306kumarAVE1407sureshMED1508subMED3609raviGood boy27010raviGood boy38011raviGood boy120 Excel tables to the web >> Excel Jeanie HTML 4
I need sum of value based on name and status.
And also i need Descrption also.
It is possible in VBA.
Sheet1 FGHIJ1NameDESCStatus 1Status 2Status 32raviGood boy50100803kumarAVE40 104subMED 605sureshMED50 Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Apr 8, 2007
My macro involves iterating thru' a loop close to 500 times, and each iteration involves some movement back and forth between Sheet1 and Sheet2. Thus I have set 'Application. ScreenUpdating = False' just before the start of the iteration to prevent screen flicker and hopefully to speed up the iteration process. However, altho' the screen thus appears 'frozen' during the iterative process, I would like a real-time 'status update' box to appear at the start of the iteration; something like: 'Currently Running Iteration 24 of 500', where '24' is the current value of the loop counter within the macro code; next loop increments this to '25', etc.
View 4 Replies
View Related
Feb 27, 2008
I am trying to use teh staus bar for simple reporting of progress. When I launch Excel 2003 on XP the status bar works as normal with Excel reporting progress etc.
When I take control in VBA using: Application.StatusBar = "some text here"
then the status bar text appears as solid black. As if each character is black on a black background. If the text is longer then the length of black increases. See attached image. I reduced the Excel window from maximised to allow me to print a small image of the window showing teh status bar. The status bar works as I would expect, running the macro I can see the progress. When I maximise it it reverts to being black on black!
View 3 Replies
View Related
Jan 3, 2013
I posted here already but the subject deviated to somewhere else...
Basically I have this in a module to format TextBoxes:
VB:
Option Explicit
Sub TxtBx(i As Integer)
Dim uf As UserForm
For Each uf In UserForms
[Code].....
View 7 Replies
View Related
Apr 29, 2014
I have a sheet with work tasks on. Column I shows the completion date for each project. In column J I would like an automated response linked to todays date. Can we use row 2 as our example? So I need in this case cell J2 to show the following:
- If todays date is more than 5 days before the completion date (in cell I2) I would like the cell J2 to show "IN PROGRESS"
- If todays date is less than 5 days before the completion date (in cell I2) I would like the cell J2 to show "AT RISK"
View 4 Replies
View Related
May 14, 2014
How can i link my PO status sheet on desktop to alert material delivery date.
View 2 Replies
View Related
Feb 19, 2009
In my spreadsheet I have column B which has a drop down list using "open" and "closed" as the choices. Whenever someone selects the closed option, I would like for that row to be moved to the next blank row on the tab called CLOSED. Is this possible? I was thinking that if it was it would require some kind of coding. I have attached my spreadsheet for you to look at.
View 2 Replies
View Related
Jun 23, 2009
I have a very long code with multiple functions and operations i.e. it calculate many fields. The normal running time varies from 2 minutes to 30 minutes depending on the data size.
Can any one tell me a way so that I can put a kind of status bar to show the progress or estimated time left? Basically, during operation it looks like excel is hanged and not responding but infact its not.
View 9 Replies
View Related
Jan 24, 2010
1. If I enter a date in B3, then D3 will be S, and if I enter date in C3, D3 will be left blank while E3 result is D (Done). To have a clear view, I have attached the excel sheet.
View 3 Replies
View Related
Jan 5, 2012
I've got a workbook which runs several macros and take approx 10 mins to run. I was wonder if its possible to put a timer in the status bar which shows how long the macros have been running.
View 9 Replies
View Related
