Flashing Button In UserForm Which Has A Macro
Apr 3, 2014
Any way to make a button to blink if by the user form?
What I mean: I got a "UserForm", it got 9 buttons and each of them have a macro (everything works perfectly), but is there a way without affecting the current macro for each button, somehow when pressed chosen me button, it flashes while delivering its intended macro?
Sample:
UserForm:
in there
Button
in this button have a macro
Sub blqh_blqh
hfhglhgd
vfdbdfbd
End sub
..........​follows another macro to the button flashes................
View 1 Replies
ADVERTISEMENT
Jan 8, 2014
Excel will hang up as if it's gone into a continuous loop (Although no looping macros are active) when you open or close a user form. The task bar in Excel will flash Ready Calculate. Visual basic reports no code is running but excel either crashes or becomes very unresponsive. I have to exit and reopen excel in order to fix the problem . It also doesn't happen at any one specific point it can vary. I have various VLOOKUPs around the workbook and userforms display the correct information. I use the INDEX formula in the control source of textboxes. I also use the offset formula to make sure DTPICKER displays correctly.
I am using 'Option Explicit' at the start of all my code. I have tried a 3rd party code cleaner. No visual Basic references are MISSING
[URL]
View 9 Replies
View Related
Apr 17, 2014
I have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
View 2 Replies
View Related
Jan 4, 2010
I have a VBA macro that sort several worksheets during th e processing but the screen flashes it move between worksheets. I would like to be able to just show a messae or have the display stay on the strting worksheet
View 9 Replies
View Related
May 21, 2008
I have attached macro code, which populates a three page template and clears the contents, so that the process can be repeated. I would like to stream line the macro which populates the template - currently there is alot of screen flickering back and forth between worksheets.
View 2 Replies
View Related
Apr 6, 2009
I want to launch userform A when the user hits the command button on userform B, I already have a macro set up to launch UserForm A and tried adding it to the code but it doesn't work.
View 13 Replies
View Related
Mar 14, 2008
I have constructed a Userform with two button options - Run a Sub that I have already written and runs fine, the other to close the userform.
how to correctly assign the completed macro ( Name: "Run_Report") to the button click action. The code below is what I have, but it does not run:
' This is the run macro code
Private Sub CommandButton1_Click()
Run_Report
End Sub
' This is the quit UserForm code
Private Sub CommandButton2_Click()
Unload Me
End Sub
The quit command works, just not the run macro - do I need quote marks, parenthesis, or a .Run command or something?
View 5 Replies
View Related
Jun 6, 2014
I have macro running with time application. when msgbox pops up, excel tab on windows taskbar should flashes, but it doesn't.When switch to excel, didn't even see the msgbox until I click on any cell.
View 9 Replies
View Related
Feb 17, 2014
I have this VBA set for a workbook_open event:
Public Sub Workbook_Open()
PromotionOrNewHireForm.Show
Sheet1.Select
End Sub
...which works, but I would prefer to have the form hide (or unload, exit, etc.) once the toggle button in that userform is first selected. I've tried a few things but none of them have worked. BTW, the userform has two toggle buttons, which run the following:
Private Sub ToggleButton1_Click()
Worksheets("Sheet1").Range("A4").Value = "Promotion"
End Sub
Private Sub ToggleButton2_Click()
Worksheets("Sheet1").Range("A4").Value = "New Hire"
End Sub
Also, once it closes, I'd like it to move on to the next macro depending on whether "Promotion" or "New Hire" is selected. Not sure if a workbook_change event is the best way to handle that.
View 1 Replies
View Related
Jul 16, 2012
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
View 1 Replies
View Related
Jan 28, 2014
Context: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
[Code] .....
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
View 6 Replies
View Related
Oct 5, 2006
This is probably really straight forward but cant see why it happens, the following macro works fine when called by a button created by the form toolbar but doesnt when called by a command button, get the runtime error 1004, "select method of range class failed"
ActiveSheet.Select
Range("B4:B37").Select
Selection.ClearContents
Range("G4:G37").Select
Selection.ClearContents
Range("B1").Select
Selection.ClearContents
Range("D1").Select
Selection.ClearContents
Range("F1").Select
Selection.ClearContents
Range("J1").Select
Selection.ClearContents
Range("M2:M3").Select
Selection.ClearContents
Range("B4").Select
ActiveWorkbook.Save
Application.Quit
View 2 Replies
View Related
Dec 15, 2008
I have created a userform for users to enter data and can not seem to make it work correctly.
I am having a issue on the Row Number Textbox. I am trying to get this textbox to reflect the current row number that I am viewing with the Userform.
I am also having a issue with the Last and Add New button.
I have formulas in Column A and Column H and when I try to go to the last Row or Add a new record it recognizes the formulas and it takes me to the row below where the formulas are. (Example Row 601 instead of Row 3)
View 7 Replies
View Related
Jan 1, 2013
It would be really good if I could not have the "close" (X) button in the top bar of my userform, I'm using it as a splashscreen, so I control when to shut it down, for that matter do I need to put up with the top ( blue ) bar at all?
View 2 Replies
View Related
Jan 29, 2014
Context: I have a spreadsheet that contains a list of employee names and their certifications. I want to be able to assign a button to each employee in column B with a macro that is able to zip files from a folder that contains that employees name.
The following code assigns buttons to each employee in column B. At the moment the code I have is able to assign the macro "Zip" to each button.
VB:
[COLOR=#333333]Dim Btn As Button[/COLOR]
[COLOR=#333333]Dim rng As Range[/COLOR]
[COLOR=#333333]For I = 2 To RowCount + 1[/COLOR]
[COLOR=#333333]With Worksheets("Sheet1")[/COLOR]
[COLOR=#333333]Set rng = .Range("B" & I)[/COLOR]
[COLOR=#333333]Set Btn = .Buttons.Add(rng.Left, rng.Top, rng.Width, rng.Height)[/COLOR]
[Code]....
The following code is my Zip macro:
VB:
[COLOR=#333333]Sub Zip()[/COLOR]
[COLOR=#333333]Dim strDate As String, SavePath As String, sFName As String[/COLOR]
[COLOR=#333333]Dim oApp As Object, iCtr As Long, I As Integer[/COLOR]
[COLOR=#333333]Dim vArr, FileNameZip[/COLOR]
[COLOR=#333333]Dim FName() As Variant[/COLOR]
[Code]...
Now, this Zip macro is able to zip the file for the employee "Anthony Tran". However I need it to be able to recognise which employee's button I've clicked and search the same files as above except with that employees name instead of "Anthony Tran".
If it makes things easier, the code for creating buttons for each employee is able to name that button as the employees name that it represents.
View 2 Replies
View Related
Aug 6, 2009
I m wondering if it is possible to cause a worksheet tab, within a workbook, to flash? What I have is a check box, that when clicked, opens up a hidden worksheet. What I would like to have happen is once the worksheet is unhidden, the worksheet tab begins to flash to show the user it is now active.
View 6 Replies
View Related
Oct 12, 2007
I originally posted this question with out the code I'm using. I am trying to make a specific cell flash to catch the attention of other dispatchers. The problem is when I we try to close the active page it will automatically open. The only way we can completely close the page is to close Excel completely. Doing this though also closes several other pages that we need to have remaining open.
Public NextFlash As Double
Public Const FR As String = "B3"
Sub StartFlashing()
If Range(FR).Interior.ColorIndex = 3 Then
Range(FR).Interior.ColorIndex = x1ColorIndexNone
Else
Range(FR).Interior.ColorIndex = 3
End If
NextFlash = Now + TimeSerial(0, 0, 1)
Application.OnTime NextFlash, "StartFlashing", , True......................
View 9 Replies
View Related
May 29, 2009
I have solved many problems with the solutions presented here.
I have multiple workbooks which contains numerous different dates.
and I need to make them flash when the dates are due within one week etc.
I would like to know what kind of command in vba or formula in excel it needs.
View 9 Replies
View Related
Jun 28, 2014
Im have a userform with a listbox and a textbox and a commandbuttton
When i click the command button it adds the values from the listbox and textbox to the first empty row, that works fine but also want to add a new button on every row i add.
Something like this:
Column A, B, C
Listbox value, Textbox value, new button
Listbox value, Textbox value, new button
Listbox value, Textbox value, new button
Listbox value, Textbox value, new button
Etc
I have tried this code but the add button line seems to be wrong:
[Code] ,........
The whole code i use is:
[Code] .........
How to add a button togheter with the values from the listbox and textbox ?
View 1 Replies
View Related
Sep 30, 2008
I have a spreadsheet with a userform for inputing and deleting vehicles onto a spreadsheet, these are working fine,,,,
Before I try and figure it out, can 1 button be used to open a msg box and the userform at the same time
View 2 Replies
View Related
Mar 29, 2012
how to disable X button in the Userform?
View 2 Replies
View Related
Apr 19, 2012
See my file: [URL]
I've made a quick example file ( not as complete as my original file ) But they have the same code.
What i wat is the OrderNr. textbox in the userform to be filled in automatically. When customer 1 orders something new the OrderNr. needs to be 3.
So i've i click on the userform launch button ( command button 1 ) I get my userform with 2 textboxes and 2 command buttons What i press command button 1, i get a new form to select a customer.
Now the part that's missing:
If i press command button 2 i want the textbox of OrderNr. to be filled in automatically with a 3.But it has to be changeable. So if i hit backspace its empty again and i can type 4 ( or what ever ).
View 3 Replies
View Related
Sep 13, 2009
I'm using a form to display records based on a value YSNumber using this
Set tbl = Sheet1.Range("A:A")
Set fnd = tbl.Find(What:=cbo_YSNumber.Value, After:=ActiveCell, LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False)
fnd.Activate
Then I display reccord data by populating labels like this:
Label_RequestInstructionID.Caption = ActiveCell.Offset(0, 3)
Label_SchemeTitle.Caption = ActiveCell.Offset(0, 4)
Label_PMO.Caption = ActiveCell.Offset(0, 5)
I'd like to use the spin button to allow the user to cycle up or down the records.
View 9 Replies
View Related
May 13, 2006
can i remove the exit button from a userform
View 2 Replies
View Related
May 13, 2006
i have a userform on sheet 1, is it possible to have a command button to take me to sheet 2 and leave the userform open in sheet 1, so when i go back to sheet 1 the userform is still open
View 4 Replies
View Related
Apr 10, 2007
I have a CLEAR FORM command button
What codes can I use so that when I click CLEAR FORM, all the data that I encoded in the textboxes of my current userform will be erased as if I have a fresh new form?
View 4 Replies
View Related
Sep 10, 2008
how to make an object, e.g. Oval Object to flash a solid yellow & white colour? I can make blinking cells, but not objects.
View 12 Replies
View Related
Feb 9, 2007
This might sound daft, but im just wondering if it is possible to Flash text 2 different colours in a cell. Cell A1 will say - - - Well done. and I want it to flash blue and red, but not use VBA to do it. Can it be done or am I wishful thinking? This would be on Office 97.
View 6 Replies
View Related
Aug 15, 2013
How to retrieve the option button value from outside the userform (not inside the userform).
I mean from the main module i want to retrieve the value selected.
E.g.: Optionbutton1 Optionbutton2 Optionbutton3
If i select Optionbutton1 then i want to retrieve this value from outside the userform.
For reference i have attached the excel file wherein I have created the three userforms that is:
1. password (to mask the password
2. ChaseRecons (to use the option buttons)
3. Userform (to display the logo and selet folder option).
In userform Named ChaseRecons i have created three option buttons & want to retrieve the value of these from outside the userform not from the inside.
If i use (If ChaseRecons.optionbutton1.value=true then) its working fine inside the userform but not outside the userform.
View 9 Replies
View Related
Jan 26, 2014
I have two option buttons on a user form, one for a temperature of <250 & one for a temperature >250. I want the option button >250 to be greyed out or have it so that you cannot choose it & option button <250 selected if a certain criteria in a list box is selected. The list box is called Valve_Model & the criteria i want it to work on is if the valve model HPBV Soft is selected & HPBV Soft AC.
View 14 Replies
View Related
