I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click()
unloadme
End Sub
Private Sub CommandButtonOK_Click()
With Workbooks("RETS results version 2.xlsm")
[Code] ......
I have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies View Relatedi have a userform on sheet 1, is it possible to have a command button to take me to sheet 2 and leave the userform open in sheet 1, so when i go back to sheet 1 the userform is still open
View 4 Replies View RelatedHow can I assign 2 different functions on one command button. For example, I want my save button on the form to save the data from the text into a worksheet as well as open a new form.
View 5 Replies View RelatedI can't find anything direct via the web and here so I will ask what will hopefully be an easy question.
I have a form called FIELD_MX and on this form I have a Command Button called Enter ONT Demand Requirements.
When I click the Enter ONT Demand Requirements, I want to display a form called ONT_Demand_Requirements.
I know the UserForm needs to be initialized, but where should it be or am I wrong?
I want to launch userform A when the user hits the command button on userform B, I already have a macro set up to launch UserForm A and tried adding it to the code but it doesn't work.
View 13 Replies View RelatedI have a userform from which I need to be able to print a PDF document when the command button is pressed.
User enters the document number in docnum textbox (eg. 123)
On pressing the commandbutton printdoc, I need to be able to print document 123.PDF to default printer
All PDF Documents reside in a network folder mapped to the S:PDFdrive.
If the document is not found I need to display an error message stating this and return focus back to the textbox.
If the document is found I need to display a message stating document sent to printer.
I have constructed a Userform with two button options - Run a Sub that I have already written and runs fine, the other to close the userform.
how to correctly assign the completed macro ( Name: "Run_Report") to the button click action. The code below is what I have, but it does not run:
' This is the run macro code
Private Sub CommandButton1_Click()
Run_Report
End Sub
' This is the quit UserForm code
Private Sub CommandButton2_Click()
Unload Me
End Sub
The quit command works, just not the run macro - do I need quote marks, parenthesis, or a .Run command or something?
Userform2 is popped up from another userform3.
How can I have userform 3 when clicked fill in a textbox on userform2 and then finally assign it to cell F3 on my worksheet.
VB:
Private Sub CommandButton2_Click()End Sub
So I need commandbutton2 (which needs to retain a value of 1` when clicked ) on Userform3 to assign the value of 1 to TextBox44 (Which is using control Source F3 so the value here ends up in F3
VB:
Private Sub TextBox44_Change()
If TextBox44 > 5 Then
MsgBox "Your entry must be part between 1 and 5", vbCritical
Exit Sub
End If
End Sub
I have a few subs that use userforms. They all work ok except that when they are filled out and the final click to close them is done , e.g. command button "OK" or "Cancel", the button is slow to respond. I usually end up having to click twice, or click and hold for a moment before it will register.
It appears to me that the program is hanging around in the last highlighted box the cursor was in and its slow to notice a command button has been pushed.
I would like to make a userform where additional textboxes (and labels) can be added to the form by clicking a command button. Is this possible to do?
For example, a userform which has:
Contractor 1: (TextBox)
and underneath this have a command button which when clicked will add another text box e.g.
Contractor 2: (TextBox)
I'm new to vba so haven't got a clue how to go about making this userform or even if it is possible.
I'm trying to make a command button copy the text from a text box on a multipage control to the active cell in the sheet. I have been able to make it paste the text once it is manually selected and copied to the clipboard but that is all. I've tried recording a macro but that doesn't seem to work in the userform. I need it to copy the text from the active multipage tab (from a textbox) and paste into the sheet's active cell.
how to change the color of a command button created by using the control tool box
View 2 Replies View RelatedI've created a userform that will pop up automatically when opening my workbook. My workbook will have many worksheets identified by the employee's last name, then first name (i.e. Doe, John) Etc. I ideally would like the name entry in my user form to locate the correct worksheet based on the sheet name and then all of the other data in the user form be put in the next available/appropriate row and column, etc. of that particular sheet. This user form would save me a ton of time keeping my training logs up to date, instead of having to locate each employee tab manually and then enter the data and then look for the next tab, etc.
At the end of the year I'll manually go to each worksheet and balance that year's training time and cost (as you'll see from the attached example), but I'm hoping that the user form entry will identify that "yearly balance row" as having data and would skip to the next row to begin the next year's training entry. The "Enter Data" Button would place all of the user form data (other than the name) into the appropriate row/column and I believe my refresh button will empty the user form fields, but I'm hoping it won't delete the data that was just previously entered into the worksheet. (See attachment)
see in atteched file User-form "frmEntry" work fine to update the data in Trader worksheet. but i need help to program.for the "frmExit" which i program. u can look in to the database "Trader Worksheet" .it enter the data in next available row.instead of up dating the corresponding existing stock ticker.to sell the stock.also when i enter the second sell of stock it change the row which is already their.not in new row.
View 4 Replies View RelatedI have managed to put together a userform to input the data from a safety audit card to populate a spreadsheet so that i can generate stats etc (every ticked check box inputed a tick onto the spread sheet into the correct colum for the data, on resetting the form it went to the next line as per the userform database example available here). This was working fine as it only had 5 check boxes and although my code was probably a bit rough, it did the job. The code I was using is:...
View 9 Replies View RelatedI have the following code in a userform, assigned to a command button.
Private Sub CommandButton1_Click()
Select Case TextBox2.Text
Case Is = ""
MsgBox "Please enter the Name of recipient."
Case Else
End Select
Select Case TextBox3.Text
Case Is = ""
MsgBox "Please enter the E-Mail Address of recipient."
Case Else
I modified this code as it was starting at the bottom of the worksheet & checking for the 1st vacant row from the top. I wanted it to start at the top & look for the first vacant row down. That way, if there was a entry that was deleted, it would find that row 1st & keep the list in order. This code worked fine for the last 2 days, but, this morning, nothing is being entered on sheet2.range A2 or lower.
I have a userform with a command button which fires a macro.
everything works fine so far.
my problem is:
I would like to add a msgbox at the end of the macro which confirmes "successfully completed".
I cannnot simply add the msgbox at the end of the macro. don't know what I'm doing wrong.
(see below)
Private Sub CommandButtonOK_Click().
If Me.OptionButton1.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Government Securities"
ElseIf Me.OptionButton2.Value = True Then
ThisWorkbook.Worksheets("PropertyWorksheet").Range("A1").Value = "Corporate Bonds"
[Code].....
Unload Me
Application.ScreenUpdating = False
Sheets("MySheet1").Select
Application.ScreenUpdating = False
'run macro
MyMacro1 (adds, hides and deletes various sheets)
MyMacro2
[Code]....
I just need to make a user form for entering data in one of the sheets ( Pending Confirmed Orders ), requested user form should be used to enter the orders information in columns ( each column in new entry ) and just the rows ( from 6 - 21 ) with noting that row no 16 is to link external pdf file as you will see.
File : [URL] ........
I have created a userform with a texbox and a "continue" button. In my macro I first ask the user to input name, date, etc then I have a line that says "frmDiscrepancies.Show". This code shows the userform but I am unable to type anything into the textbox. How do I activate the textbox so that I can type in it? Of course the next step is to be able to click on the command button "continue" and have it continue with the macro...
View 9 Replies View RelatedI have a userform and want to disable the command button unless a text box contains text. what I need to do?
View 2 Replies View RelatedI have a requirements to do a simple monitoring data entry. Composed of 1 admin and 10 users. These 10 users are assign to a different lines basically every lines have assigned user.
These 10 user will do a data entry. once they are done on the data entry the Admin will update those entered by the users based on ticket number and the users can browse those updated records.
Every users per line have assign ticketnumber that start in "L1"&YY&MM "-"001" this compsed of lines + year+month and numbers.
For the users side. Right now i have already created a workbook with userform to perform data entry by user (samplefor line1 and line2 user).
It has also a viewing form to view by the users if its already updated by the admin. i put also an events if the admin work book is open by other user they cannot access the workbook.
For admin side. I created also a userform for updating the records entered by the users to update records admin will enter ticket number to textbox.
This is the reference to find and search those records that belong to a particular ticket number and lines which will be updated by the admin.
Right now, I am doing records consolidation for both user and admin records. I have a button for both admin and userlines to perform consolidation. Once the user entered the records admin will capture those records and copy to the workbook used by admin to perform update. Then once the admin perform update the user will capture those updated by admin and copy to the workbook under the user.
Basically they have separate workbook for their entry and database.
Right now I encounter some issues which I think this will affect the integrity if records. Sample like once i perform consolidation it create duplicates records.
I have a list of account entries on sheet1 that go from 1/1/2014 to 2/05/2014. I want a userform that prompts for a cutoff date, where I will enter 1/31/2014, and it will then clear all entries AFTER the date that I enter into the userform.
I will be doing this on a monthly basis, and the number of rows will change each month.
Is this possible to do using VBA?
I have a userform, UserForm1, which lives in a spreadsheet called 'Data Entry.xls' There is nothing else on the spreadsheet itself, it's just for the use of a userform.
I would like the user to populate textboxs in UserForm1 but have that update cells in a separate spreadsheet 'Training.xls' in the same directory.
I have this code at the moment to find the next empty row and to input data into it, which is working perfectly to enter data to sheet1 in Data Entry.xls:
[CODE]Private Sub CommandButton1_Click()
eRow = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
Cells(eRow, 1) = TextBox1.Text
Cells(eRow, 2) = TextBox2.Text
Cells(eRow, 3) = TextBox6.Text
End Sub[CODE]
How can i modify it so it would do the same thing, i.e find the next empty row and then populate with what the user types in the textbox but in Sheet1 of 'Training.xls'
Would 'Training.xls' need to be open?
I have created a userform with 3 text boxes. It also has three buttons - clear, Cancel and Generate record button.
User form takes entries in the three text boxes and on clicking the Generate Record button, the values of the three Text Boxes are inserted in Column A, B and C of sheet1. The columns keep on populating with new data on each submit in the row below the last record.
Now it is required to enter data only if the value entered in TextBox1 is new and has not been entered previously in column A. If textbox entry is already aviailable in column A, a message box of 'Record available' shoud be prompted and the text entry must not be allowed until the data entered in TextBox1 is not unique.
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc
Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example
John Red
Julie Red
Bob Blue
John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
How to put a formula into my userform created in Excel.
What I have is 4 Combobox's which can select either 0,1,3 or 9 then each box has a weight which that number must be timed by this is the excel formula:
=SUM(L48*10,M48*10,N48*8,O48*6) so that was 9x10,3x10,9x8,3x6 Which gives me a sum of 210.
Can this be added to the userform so when the user selects the number from the dropdownbox it will calculate it into the total score?
This is a screen shot of the userform : Capture.JPG
I have been working on a userform for entering in and editing data in a spreadsheet, but I'm stuck with the code for updating the edited data.
I have two pages on the Userform, one for adding a new entry, and one for editing an existing entry.
On the page for editing an existing entry, I have a combobox that displays information in the text boxes based the selection. What I need to be able to do is click save once I have made changes to the information in the text boxes and then have that information saved in the spreadsheet.
I have figured out all of the other buttons in the userform, but I am struggling with this last one. Here is my spreadsheet with some sample information entered in : ExcelFile.xls
I have created a combo box in a userform called combobox1 and userform1
I have also created 2 command buttons called Go and cancel
below is the code for the combo box.
I have a worksheet (attached) that lists various clients in columan C. Column E lists whether each of the clients listed in Column C are 'Existing Business' or 'New Business'. I require a user form that has three radio buttons (one to select 'New Business', another for 'Existing Business' & one for 'All').
When Selecting a radio button, (e.g. 'Existing Business'), I need all clients listed in Column C of the worksheet that also have 'Existing Business' in Column E to be listed in a ListBox on the UserForm (with the second radio button allowing the text box to list 'New Business' and the third to list both Existing and New).
