Force Cells To Recalculate (simulate Double Click)
May 4, 2007
I have an interesting question for everybody here. Let me see how to best explain it.
I start in the code making sure column Action Plan completion has a value in it. Copying in the issue modified column if neccesary.
'Back fill last modified
'I need to start with the first data row (3) and the action plan completion column
Let intcurrentrow = 3
Let intcurrentcol = intactionplancompletion
Do Until intcurrentrow > intmaxrow
If Cells(intcurrentrow, intcurrentcol).Value = "" Then
Let Cells(intcurrentrow, intcurrentcol).Value = Cells(intcurrentrow, intissuemodified).Value
'Need to ensure that everything is formatted as a date
Let Cells(intcurrentrow, intcurrentcol).NumberFormat = "m/d/yy h:mm AM/PM"
End If
Let intcurrentrow = intcurrentrow + 1
Loop
Later, I place this formula in a given cell.
=If(I9="Open-Remediated",M9-K9, If(I9="Closed-Remediated and Validated",M9-K9,"" ))
The info I copied above is placed into the column K.
When I run the macro, the cell formula outputs "#value".
However, if I go double-click then enter the cell calculates just fine.
I've tried excels overall recalculate function, but that doesn't change this.
Does anybody know how to simulate a double-click on a cell?
I think this is going to be the right method for me. I need to simulate a click on a link (because the link calls a javascript), though the link is buried behind frames.
Here's the code I am sure works for a normal 1 frame page.
appIE.Document.all(0).contentWindow.Document.all("Some Link").Click Here is the frame setup I have to work with. Mind you the frames I need to target are not labeled so I'd have to use the numbers.
HTML <FRAMESET> <FRAME> <FRAMESET> <FRAME> <FRAMESET> <FRAME> This is where my link is hiding </FRAMESET> </FRAMESET> <NOFRAMES> </.NOFRAMES> </FRAMESET>
I have a log that stores a list of different files in the first column. All of these files are worksheet hyperlinks (ie: =HYPERLINK("\USSS000010_PUBLIC5_COMMON15_PPA20066-032G6-032G.xls","06-032G")). If I click on any of these cells the file will open.
I am trying to open certain files from the list using VBA.
My question is Is there any way to simulate a mouse click, on the cell containing the hyperlink, using VBA?
I am trying to set up a double click macro that checks the color index of the exact same cell you double click on, but in another sheet. What would be the syntax for that?
I'm trying to double-click a cell to edit the contents, and I am off a few pixels, it treats the double-click as a double-click on the cell border, not the cell contents, and the focus jumps to another cell in the direction of the border instead of going into edit mode. The effect is as if I had pressed Ctrl and the arrow in the direction of the border I clicked on.
The only way I've found to disable this is to turn off the option "Enable fill handle and cell drag-and-drop", but unchecking that also disables actually useful things, like dragging the corner of a formula call to copy it down, etc.
Is there a good way to disable this cell jumping when I accidentally double-click a cell border?
I have a named Formula which works but it will only recalculate when I click the green tick in the Formula Bar. How can I get it to work without needing to do that?
I need to create a macro that whenever the user clicks the restore down button it will not restore down, but either do nothing, or make the application display full screen. The following code runs when the workbook opens and whenever a different sheet is activated and I would like it to run when the user clicks the restore down button.
Private Sub Workbook_Open() Application. ScreenUpdating = False Application.DisplayFormulaBar = False Application.ShowWindowsInTaskbar = False Sheets("01").Select With ActiveWindow .DisplayHorizontalScrollBar = False .DisplayVerticalScrollBar = False .DisplayWorkbookTabs = False End With............................
I am trying to write some questions on cells of Sheet1 of a workbook. Then I want to write the answers on cells of Sheet2 of the same workbook. I want the user to be able to double click the question-cell on Sheet1 and be taken to the respective answer on Sheet2.
I have a spreadsheet that just uses the basic "SUM" function. This morning I went to use it and the function does not work after I change a number within the field of that function. If, however, I go into the SUM function and double click, then hit enter, it does the new calculation.
I have this list of all rangenames in my workbookin column A:A
For some reason I want to doubleclick on the rangename in the list to activate this range.
The reason is that I want more smooth activation-prosess; The Excel Range List is too long to practical use as a direct lookup, so I want to activate directly from my own list (where i have added definitions to the range names.
I have tried to build a hyperlink formula, but failed. Maybe the macro below can be modified to do the job, but I am stuck here as well.
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean) Dim RangeName Application.ScreenUpdating = False If Target.Count > 1 Then Exit Sub If Not Intersect(Target, Range("A:A")) Is Nothing Then Cancel = True
I seem to have broken something!. Whenever I double-click to open an Excel file (.xls files are associated correctly), Excel opens, but nothing happens. That status bar says "Ready," but my workbook never appears.
If I do a File-> Open within Excel, then I am able to open the workbook. I have no idea what is going on. This occurs for all Excel files whether they contain macros or not.
I have a code for doubleclick on a cell and a gdt application chart will open.
Private Sub Worksheet_BeforeDoubleClicK(ByVal Target As Range, Cancel As Boolean) ActiveSheet.Unprotect ThisWorkbook.Unprotect Dim i As Integer Dim gdt As Long Dim S As String Cancel = True With Application
If Target.Address(False, False) "C11" Then Exit Sub
'Place your direct path to open this GDT application
S = "C:Documents and SettingsUserMy DocumentsAndy's MachineINSPECTIONGDTGDT BitmapGD&T_Font.exe"
If Dir(S) = "" Then MsgBox "File does not exist:" & vbCrLf & S, vbCritical, "Error" Exit Sub End If gdt = Shell("""" & S & """", vbNormalFocus)
End With
ActiveSheet.Protect ThisWorkbook.Protect End Sub What would the code be for a range of cells if doulbe clicked the range would be C11 thru C35
Also, I have a double click code for another symbol chart to open.
How, would this be used in the same manner if a coulmn or row were to apply on double click.
on the worksheet there are six ranges...each range has three columns...the first is team name, the second is rep name, and the third is the metric being measured.
what i would like to happen is...
when a team name is double clicked in any one of the ranges, i would like all three cells (team name, rep name, and metric) to be boldfaced and have the cell interior change color for all instances across all six ranges that match the team name double clicked. when double clicked again, it should go back to original formatting.
likewise, when a rep name is double clicked in any one of the ranges, i would like all three cells (team name, rep name, and metric) to be boldfaced and have the cell interior change color for all instances across all six ranges that match the rep name double clicked. when double clicked again, it would go back to original format.
so for example, if i happen to click on a cell in the team column in the second range for "team a", all cells in each range (including the adjacent cells for rep and metric) would be highlighted.
I have populated a listbox from a filtered list and when 'Double Clicking' a name I want a macro to run. All seems to be OK apart from it is not finding/returning any data; I know the data is there and I think it may be the way I'm referencing the listbox value;
Sub CopySignificant()
Dim DestSheet As Worksheet Set DestSheet = Worksheets("Clients to Invoice")
Dim sRow As Long 'row index on source worksheet Dim dRow As Long 'row index on destination worksheet Dim sCount As Long sCount = 0 dRow = 1...................
I am trying to create code so that when a cell in Column C (for example C1) is double clicked, it makes the font bold, italicized, blue and inserts a row below the double clicked cell. I am also trying to make it so that if the cell is double clicked again, it removes the bold, italics, blue and deletes the row that was previously inserted.
Private Sub Worksheet_BeforeDoubleClick _ (ByVal Target As Excel.Range, Cancel As Boolean) If Target.Font.Bold Then ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select Selection.Insert Shift:=xlDown ActiveCell.Select Cancel = True If Not Target.Font.Bold Then ActiveCell.Offset(1, 0).Rows("1:1").EntireRow.Select Selection.Delete Shift:=xlUp ActiveCell.Select Cancel = True End If End If End Sub
I want a X to be put in the activecell if empty or removed if already there. By searching this forum I found and read the article "Adding a Command Button to the Excel Right Click Pop-up Toolbar/Command Bar" and was able to add the code to do this to the right click sub menu. Is there a way to do the same thing by double clicking on the cell? This probably seems a bit nit pickey but I would just like for it to work using double click for my users. I wrote the following code to performe the action
Sub Toggle_Macro() If IsEmpty(ActiveCell) = True Then ActiveCell.Value = "X" With Selection .HorizontalAlignment = xlCenter End With With Selection.Font .Name = "Arial" .FontStyle = "Bold" .Size = 12 .ColorIndex = 3 End With Else: Selection.ClearContents End If End Sub
And placed the code below in Private Module of the Workbook Object.................
I am trying to run a macro when I double click on a certain cell (D34). The cell has data in it (Southeast NSC). What I am expecting to happen is once I double click on the cell the macro will run the retrieve and I will end up at expense chart page.
The macro I am trying to run is an Essbase retrieve.
Testing my worksheet, I found that if I double click on any cell that is not locked, the worksheet becomes unprotected. I need to prevent this from happening. I tried the following code, but it didn't work.
I'm using a little sub routine to bring up a pop up calendar when i click in a cell, everythings lovely but it annoyingly comes up when i select a clolumn or row that also contains that cell. modification to require a double click to display the calendar?
I have a sheet with some 300 plus rows of data. I use filters to sort through the rows to get down to anywhere from 8 to 10 or so rows. At that point I would like to be able to select (doule click) a filtered row of 10 cells (A:J) copy the data and paste it to a different sheet starting with cell B18. I want to be able to perform this process up to 5 seperate times.
I have recorded a macro to do basically what I am trying but with many short falls. It only selects one row, I cannot double click on a row and it dosen't always paste to the proper cell.
When we double click between two cell it goes to the last entered cell. I would like to disable this through a macro. Can anyone pls provide me a code to disable this.
I want to be able to double click on a cell in a column. If it has a certain word in it, it will take it to that worksheet. Auto filters are used so these cells can move in a column at any time. This is why I am looking for a code to validate the contents in the cell first.
ie. Cell has the word: BSALT, when double clicked it will take it to the BSALT worksheet.
Cell has the word MLW, when double clicked it will take it to the MLW worksheet.
And so on.
These values are in one column only. If they weren't able to be autofiltered i could do it, but the mere fact that they can move around is giving me trouble.
Is it possible to create a menu that could be called by a double click which would allow you to click on a value from that menu and insert it into the double clicked cell. I know I could use a data validation list, but that is tacky and you have to scroll down the list to find the data you would like. I'd like to have a menu pop up that stores different values in 6 columns and 25 rows. Any way without having to jump into an access database?
