I have a log that stores a list of different files in the first column. All of these files are worksheet hyperlinks (ie: =HYPERLINK("\USSS000010_PUBLIC5_COMMON15_PPA20066-032G6-032G.xls","06-032G")). If I click on any of these cells the file will open.
I am trying to open certain files from the list using VBA.
My question is Is there any way to simulate a mouse click, on the cell containing the hyperlink, using VBA?
Does someome know a macro to simulate mouse movement to stay idle to prevent communcator (Lync) from turning off? I need this to run for 2 hours only.
View 1 Replies View RelatedI think this is going to be the right method for me. I need to simulate a click on a link (because the link calls a javascript), though the link is buried behind frames.
Here's the code I am sure works for a normal 1 frame page.
appIE.Document.all(0).contentWindow.Document.all("Some Link").Click
Here is the frame setup I have to work with. Mind you the frames I need to target are not labeled so I'd have to use the numbers.
HTML <FRAMESET>
<FRAME>
<FRAMESET>
<FRAME>
<FRAMESET>
<FRAME> This is where my link is hiding
</FRAMESET>
</FRAMESET>
<NOFRAMES>
</.NOFRAMES>
</FRAMESET>
I'm trying to find the code which will have the effect of a double click.
I want to use event code so that when I click on a cell once it will cause a drop-down in the cell (the cell is formatted with wrapped text).
I have an interesting question for everybody here. Let me see how to best explain it.
I start in the code making sure column Action Plan completion has a value in it. Copying in the issue modified column if neccesary.
'Back fill last modified
'I need to start with the first data row (3) and the action plan completion column
Let intcurrentrow = 3
Let intcurrentcol = intactionplancompletion
Do Until intcurrentrow > intmaxrow
If Cells(intcurrentrow, intcurrentcol).Value = "" Then
Let Cells(intcurrentrow, intcurrentcol).Value = Cells(intcurrentrow, intissuemodified).Value
'Need to ensure that everything is formatted as a date
Let Cells(intcurrentrow, intcurrentcol).NumberFormat = "m/d/yy h:mm AM/PM"
End If
Let intcurrentrow = intcurrentrow + 1
Loop
Later, I place this formula in a given cell.
=If(I9="Open-Remediated",M9-K9, If(I9="Closed-Remediated and Validated",M9-K9,"" ))
The info I copied above is placed into the column K.
When I run the macro, the cell formula outputs "#value".
However, if I go double-click then enter the cell calculates just fine.
I've tried excels overall recalculate function, but that doesn't change this.
Does anybody know how to simulate a double-click on a cell?
I use Excel XP 2002. I now can't copy /paste by using the right mouse button. It works perfectly in other MS products, on the net and on the desktop. l have checked my Tools/Options with other users, I have uninstalled, rebooted and reinstalled the complete Excel package but the problem persists, even from start with a blank worksheet. I have also checked and there are no add-on ticked.
View 5 Replies View RelatedI have a large project that I've been able to move all code from the workbook to an Add-In (except code that's sheet related).
I have one module that refuses to run from the Add-In. In this code
I'm trying to design a form, for various staff members to populate.
I would like to ease their usage by putting a check mark in which ever cell they left click, also if they click a second time in the same cell it will undo the action.
I have not decided yet which which cells I am using, but is their some simple routine that could be used over & over again and all I would need to do would (hopefully) simply be to change the cell numbers in the routine to apply to that cell or range of cells.
If we mouse click any cell (right/left) it put √ symbol in that cell... How can I do it?
View 2 Replies View RelatedIn excel when you have filters on for all columns there is a little bitty square box with a little down arrow (like an upside down triangle) in the lower right corner of every cell in the top row (the header row) and I can't find a way to select one of those little itty bitty down arrows without using a mouse - -
Is there any way to select one of those little down arrows in the little filter box icon thingy with the keyboard?? I can't figure it out.
I just want to select the little arrow so that the filter dialog box opens - I am trying to create a keyboard macro that will use the 'BEGINS WITH' macro but when i record the macro it uses the same word for the "BEGINS WITH" parameter every time and I want it to use the word in the current clipboard - can't seem to write that.
For instance if I want to cut a row and column, how do I insert with the keyboard without pasting over other data
View 9 Replies View RelatedI ask because I would like to change the value of a cell within A:A to TODAY() if the user right clicks on it - or with some keyboard combination.
View 9 Replies View Relatedmy right mouse-clicker doesn't work in excel anymore. something with macros happened I guess.
has anybody an idea to activate it again?? it's just in the workfield, to change worksheets-colours and stuff at the worksheet-registry it works as usual.
it's very nasty to work in cells without mouse..
I want to select a function from a right mouse click that will place the current date in the selected cell.
Example:
1) Click on a cell
2) Perform a right mouse click
3) select the date function
4) the current date appears in selected cell
could this be set up so that the date function in the right mouse click only appears when specified cells are selected? Is this doable?
I have a list box with items. When I stay on item and press mouse right click, I want see pop up menu with "remove this item" and "add new item".
View 8 Replies View Relatedway, using VBA code, to disable/enable individual shortcut menu items that are are made available with a right mouse button click. The following code disables the right mouse button completely but I would like to disable only a couple of options like the ' Cut' option.
The code to disable is below and to re-enable I just change False to True.
Dim cb As CommandBar
i = 0
For Each cb In CommandBars
If cb.Type = msoBarTypePopup Then cb.Enabled = False
Next cb
I have a worksheet that I use to monitor the progress of student interns. They are assigned 20 different tasks and recieve 5 points for each task they complete, for a possible total of 100. In my worksheet, I record their progress and maintain a running total. I do this by simply inserting the number "5" by each cell containing each task. Instead of inserting the value, what I'd prefer to do is simply place my cursor, click the mouse button, and have a formattable check mark appear with a hidden value of "5". I'm simply trying to create a snazzy interface. Do I want too much? Or is it actually possible to do this?
View 14 Replies View RelatedI have an excel file with a column (I) which lists the total number of businesses in a different tab (DATA) that meet certain restrictions (these restrictions being listed in the same row in different cells). When the cell under coluimn "I" is double-clicked, it pulls the businesses from tab DATA that meet the restrictions for that row and shows them all in another tab.
I don't know the person that created this and was wondering if there is a way to figure out what is being done to make this happen? I looked in macros, but didn't see anything relating to this. Anyone know how this is done?
So you know, I have tried double-clicking other cells, but nothing happens - not even editing into the cell (altho this can be done from the toolbar up top).
I have a menu structure in place so when a user clicks a button, it opens a Userform as a menu. The only problem i have is that if the user doesnt want to use that menu, and clicks on the spreadsheet, it doesnt dissapear.
Is there any VBA code that anyone knows that when a user clicks on the spreadsheet, or even just clicks their mouse anywhere (ie other menus at the top, spreadsheet, desktop) like a mouseout code on HTML so the menu will dissapear?
A list box selection works fine on my computer but on a friends Windows Vista PC the following happens:
Selecting items near the top of the list works fine. 1/4 of way down a mouse click on an item selects the Next item.
1/2 of the way down in the list, the mouse click on an item selects the one 2 or 3 further down, etc., etc.
it would be possible to have text disappear after being displayed in Excel for a while.
My son and I played around with games (helping create a photographic memory, I told the youngster!) on the thing and until yesterday neither of us noticed that clicking the mouse anywhere (actually just clicking it) causes the screen to "freeze" while the code still happily erases the text in the background.
Hitting ESC allows the screen to cath up to the actual code EVEN THOUGH the ESC key is actually disabled from breaking the code.
I'm using code based on the following post: Add Borders To Cells Of Spreadsheet From Access. That code was developed for a relatively small recordest. I am using the same coding style to transfer a recordset that has roughly 2000 records in it. Since this is all taking place over a network there is a period of time (about 15-20 seconds) where Excel is open and the user is watching the cells get populated from Access. If, during that period of time when Excel is open, the user clicks in a cell during the population of data, it stops the process and causes an error on the Access end (Error 50290: Application-defined or object-defined error). Is there a way I can prevent user input (perhaps prevent signals from the keyboard and mouse) until after the data has been transferred? I know this is a long way to do a TransferSpreadsheet command but I like the way the column headers get formatted as well as the column sizes. I also think it's pretty cool to watch the data populate as it goes.
View 2 Replies View RelatedI've just inherited a load of Excel files I need to continue using, but my predecessor has done something that disables the middle-click scroll ability.
I can still scroll up and down by turning the wheel, but I want to be able to click it and scroll in all directions at speed - I didn't realise how much I used this until I couldn't. Can't see anything in the VBA sheet properties, and they are all .xlsx files. Nothing leaps out of the settings either. If I create a new file or a file of mine within the same session, they work fine.
Locking text in cells but not the ability to change colour of cells
******** width="234" height="60" frameborder="0" marginwidth="0"
marginheight="0" vspace="0" hspace="0" allowtransparency="true" scrolling="no" id="aswift_0" name="aswift_0" style="left: 0px; position: absolute; top: 0px;">*********>
I have a spreadsheet where I can change the colour of a cell by clicking the mouse, I also have text in many of the cells.
What I need to do is protect (lock) the text so that no one can change the text in any of the cells, but I still want to be able to change the colour of the cells by clicking the mouse in that cell.
I am trying to take two random Mouse click selections and swap a set of ranges associated with the cells that are selected. For example if the user clicks on A1 it will resize(3,22) and store the selection as a variable to be swapped with another selection. Here is what I have so far but I keep getting a object required error on rngEmp1.
VB:
Sub SwapGroup()
If Selection.Cells.Count < 8 Then
MsgBox "Please Select two Groups to swap. Press and hold 'Ctrl' in between your selections", , "Swap Groups"
[Code] .....
i need a macro that will simulate the little corner crosshair that you drag to fill in and increment formulas. i need to fill down on sheet 2, columns a thru m a number of rows equal to sheet 1,column b, count -1.
View 9 Replies View RelatedHow to create like a random number generator or something. So like +.09 is 57% and -1 is 43% and for it to randomly generate like 100 numbers, so that I could graph it later.
View 5 Replies View RelatedIs it possible to lock the computer using VBA. i.e Simulate pressing Ctrl+Alt+Delete and then clicking Lock Computer so once this has been clicked the user will have to enter the password to unlock. I thought that using the SendKeys would be a start but this does nothing.
SendKeys "^%{DELETE}"
DoEvents
I wonder if it is possible to make a macro that right clicks a cell and then chooses a option from the list?
View 11 Replies View RelatedIs there a way to have a picture set to a cell so when you put your mouse on it it will popup like the comments do.
View 2 Replies View Related