Force Textbox Vertical Scroll Position To Top After Value Change
May 13, 2009
When a userform textbox value is changed, if the vertical scrollbars were shown previously (due to more text than displayed size) and is still required for new value, how do you reset the scrollbar/textbox value back to the top (if it was previously scrolled down by the user). If teh scrool bar is no longer required for new value (due to sufficient space to display new value without scrollbars), how do you remove/hide the scrollbar again until needed.
I have created a form that has two textboxes on. It is used to edit existing data that is selected by a combobox on the same form.
Is there a way to force the textboxes to show scroll bars if the text exceeds the textbox height or just have them always shown?
It is difficult to distinguish on some of the data whether the data goes beyond what is visible. Without actually clicking into that textbox the scroll bars will not show.
My spreadsheet has 459 rows; however, the vertical scroll bar ends at row 569738. I have attempted to delete all of the extra rows by holding SHIFT and CTRL, striking the down arrow then right-clicking on the left margin of highlighted row numbers and choosing delete. I have also done the same procedure except clicking clear all from the editing menu. None of these methods has removed the rows and enlarged the vertical scroll bar to a proportionate size in relation to the number of rows.
I have used split panes to show two copies of my screen side by side/left and right.
There are already two horizontal scroll bars on the bottom - one on each pane. There is only one vertical scroll bar on the right side of the right pane.
Two questions:
1. Can a VERTICAL scroll bar be added to the right side the left pane so that each pane can independently be scrolled up and down without the other pane scrolling simultaneously?
1. Is there a way to remove these HORIZONTAL scroll bars on the bottom?
VBA Code of a custom control button, Scroll Bar, that mimics the same code as the corresponding form button, scroll bar? Where a cell is selected and the scroll bar changes the cell value from 0 to 100 in single intervals.
I need to transpose or move some of the data on Column B to horizontal position, is there a formula that I can use to do this? Attached is sample of what I want to do.
My spreadsheet has 600rows and the vertical scroll bar ends at row 459424. I have attempted to delete all of the extra rows by holding SHIFT and CTRL, striking the down arrow then right-clicking on the left margin of highlighted row numbers and choosing delete.
But the unwanted rows are still there and my vertical scroll bar is not correlated to the 600 rows.
I use a very simple textbox in a userform for sequential output only (it displays status messages of a long program run). The box nicely scrolls vertically up the lines but only till the userform has the focus (i.e. it is the actual selected window). But when I change the focus to othe window - scrolling immediatelly stops. Unfortunatly when I activate a new Excel sheet in the background program, the userform lost the focus and scroll is stopping.
Has anybody a solution for it? I have already tried positioning the textbox with sellength/selstart but I was unable to start the scrolling again from the proper position. I know that VB has the scrolltocaret() funcion but it is missing in VBA.
I have a UserForm that requires a value in TextBox10. I load a "1" into it at start up. If the user tries to delete the value in TextBox10 and exit, leaving either "" or 0 in the TextBox, it will cause a great many problems. I need someway to keep the focus in TextBox10.
I tried to find something using the search engine but I could not find anything searching with this subject.
Here is the code from my first attempt:
Private Sub TextBox10_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If TextBox10.Value = 0 Or TextBox10.Value = vbNullString Then TextBox10.SetFocus Exit Sub End If
It doesn't seem to do anything. When I delete whatever is in the Textbox and hit enter, it should just stay in TextBox10 but instead it goes to the next tab location.
I have a TextBox in a Worksheet with a ScrollBar defined and its working perfectly! The only problem is that everytime I click outside the TextBox, the ScrollBar goes to the lowest position and I only can see the bottom of the text in the TextBox...
Is there any way of keeping the ScrollBar on its position everytime I click outside the TextBox?
In my userform, I have a textbox where I enter a number.
When I hit the return key in the textbox, I want the userform to act like I hit a commandbutton_Click. (The commandbutton_Click takes the contents of the textbox and locates a line with that number in it in a specific worksheet, and then displays the line of info in other textboxes in the userform).
I want to force a UserForm TextBox to format the text typed in to have the first letter of each sentence capitalized and all other letters to be lower case when I exit the TextBox.
I have an UserForm, where I have several text boxes. One of these textboxes should be entered with decimals. I have been able to cope with the declarations, and set the variable as Variant. However, is it possible to prevent the user inserting "," instead of "."? Alternatively, automatically change "," to "."?
I have a choice of 9 command buttons on a form that enter a short string of text into a textbox. Each button enters a different string into the textbox. The string is the prefix to a product serial number. Once the user has clicked the button & entered his preferred prefix I would like the cursor to be flashing after the last character ready for the user to manually type in the remainder of the product serial number. I'm guessing (with my limited ability) that I have to create a function to do this & then call the function when the button is clicked ?
I am designing a from with a variable number of titles. The user should be able to insert a title into a column by typing in the title that he wants into a text box, and pressing a command button that I have created ( named add). The problem arises when I try to get the text to lie vertically as opposed to horizontally (in the cell, not as a text box. If this can only be done as a textbox, let me know). Is there any way to do this?
I'm trying to get a scroll bar to change a percentage value. My percents are to the hundredth. I understand how to adjust the properties to get it to use whole numbers... but i am trying to adjust my smallchange by .01% and large change by .1% is this possible? or is there a workaround for it? i've only ever used scroll bars for whole numbers.
I have a massive list of items, most of the same items have different detail depending on the item itself and/or region its being sold etc. I'm been using combo boxes to change regions giving the full range of items within that region but different prices etc.
The problem i'm having with combo box or even vlookup is I can only search or change details in rows (row number), and not able to figure out how to change details within a set of columns (vertically). I want to be able to select the region via combo box and change the details within a set of columns (top to bottom).
Formula/code to change the position of where the subtotals are placed. I don't want them appearing at the beginning or end of the data set but in a separate column beside each data set. how to access the code so I can try and alter it myself.
I have a large database with names down the left and numbers across the top. I want to "tilt" the entire table so that the names run across the top and the numbers run down the left side while keeping all the data together.
I have a chart that needs to be positioned at the bottom of a table of data. (The table of data is created by some VBA which extracts data from another sheet based on user input). The chart is a pivot chart built on a pivot table from another worksheet. I've read the suggestion that the chart should be positioned above the table of data which I would do, however as there is already a series of tables and charts above, it would be too confusing for the user to see the chart out of sequence.
As I already have a fair bit of VBA to generate my existing sheet, I’d like to have something very simple that I can insert in various places depending when the user makes a change, which requires the chart to be repositioned. Something like:
Change chart position To Range ("B65536").End(xlUp).Row
The accounts listed on this report change on a monthly basis. I am attempting to create a macro or write a formula that can but used each month to fill in this list automatically. On Sheet 1 is a short example of what the report looks like when exported into excel. The numbers on the left are the numerical hierarchy. The long set of numbers are the account numbers and the others are the categories that each are located under.
Sheet 2 is what I need the end result to look like. One of the problems I am running into is how to handle the fact that the hierarchy re-uses numbers. The hierarchy always runs vertical, therefore "5" always falls under the "4" that is directly above but when there is another "4" it should be ignored and continue on up the chart until it finds the first "3" and place that in the cell to the right then find the first "2" and so on.
I have an autoshape on an sheet, and use this code (it's a circle), to rezise it....
[Code] ....
However, it does rezise it, but the shape doesn't keep it's central position. Is there a bit of code I can add to stop the shape from moving? In other words, have the shape rezise around it's center of location?
I have written a macro to export many bmp image files to different PPT slides. Everything works fine, but for few slides I am not able to change the co-ordinates. I am using the below code to position the image files. But no matter how much I change the values, the images sits in the same place. And I dont get any error.
I have a very large file of data, over 500,000 rows, opening in one sheet in Excel is not an option with my current version. In each row I need to change the characters in positions 41-44 from whatever they current are, to '9999'. I'm sure there has to be a way I can do this using vba, does anyone have a sample snippet of code, or another post they can point me too?
I am building this waterfall chart. I'd like to put conditional color formatting to change the vertical bar automatically e.g. if it is positive, the bar color is green and if it is negative the bar color is red.
