I want to force a UserForm TextBox to format the text typed in to have the first letter of each sentence capitalized and all other letters to be lower case when I exit the TextBox.
I know the PROPER function will convert all text to capitalise each word, is there a formula that can convert only the first letter to caps and the rest to lower case?
How do I enforce for ranges A1:A10 and C1:C10 that whatever is entered in these cells is changed to sentence case, i.e. "today it is Raining." will change to "Today it is raining.".
I thought of having helper columns with the following formula that would then paste over the ranges on a Workbook.close event but it seems long-winded and not the right way of doing it.
Some handy code that I can put in a VBA module that will convert all text within a Spreadsheet to Proper or Sentence like this ---> Hello Everyone, Hope You Are All Happy.
I have a series of input boxes and in one particular input box ("TypeScore") if the lower case is entered I want to convert it to upper case. Here is a small snippet of the series of input boxes. I have tried just about every suggestion I can find on this forum, but can't get it to work.
Below is the existing code that I'm working with and would like to be able to make the ' name' column either Upper or Proper case on entry. I haven't decided which I'm going to use yet.
Set r = Sheet1.Range("A2:C65536") If Not Intersect(Target, r) Is Nothing Then sTgt = Trim(Target.Value) If sTgt = "" Then Exit Sub
Select Case Target.Column Case NmCol If InStr(sTgt, ",") = 0 Then iSpc = InStrRev(sTgt, " ") Target.Value = Mid(sTgt, iSpc + 1) & ", " & Left(sTgt, iSpc - 1) End If
Is it possible to make a spreadsheet so that everything that is typed into it is in CAPITALS? I have a need for that for a spreadsheet that I am using at work, but I remembered that in the title box above it only capitlaizes the first letter. I thought if it can do it with the first letter can Excel do it with all of the letters.
I have a UserForm that requires a value in TextBox10. I load a "1" into it at start up. If the user tries to delete the value in TextBox10 and exit, leaving either "" or 0 in the TextBox, it will cause a great many problems. I need someway to keep the focus in TextBox10.
I tried to find something using the search engine but I could not find anything searching with this subject.
Here is the code from my first attempt:
Private Sub TextBox10_Exit(ByVal Cancel As MSForms.ReturnBoolean)
If TextBox10.Value = 0 Or TextBox10.Value = vbNullString Then TextBox10.SetFocus Exit Sub End If
It doesn't seem to do anything. When I delete whatever is in the Textbox and hit enter, it should just stay in TextBox10 but instead it goes to the next tab location.
I have a TextBox in a Worksheet with a ScrollBar defined and its working perfectly! The only problem is that everytime I click outside the TextBox, the ScrollBar goes to the lowest position and I only can see the bottom of the text in the TextBox...
Is there any way of keeping the ScrollBar on its position everytime I click outside the TextBox?
In my userform, I have a textbox where I enter a number.
When I hit the return key in the textbox, I want the userform to act like I hit a commandbutton_Click. (The commandbutton_Click takes the contents of the textbox and locates a line with that number in it in a specific worksheet, and then displays the line of info in other textboxes in the userform).
I have an UserForm, where I have several text boxes. One of these textboxes should be entered with decimals. I have been able to cope with the declarations, and set the variable as Variant. However, is it possible to prevent the user inserting "," instead of "."? Alternatively, automatically change "," to "."?
When a userform textbox value is changed, if the vertical scrollbars were shown previously (due to more text than displayed size) and is still required for new value, how do you reset the scrollbar/textbox value back to the top (if it was previously scrolled down by the user). If teh scrool bar is no longer required for new value (due to sufficient space to display new value without scrollbars), how do you remove/hide the scrollbar again until needed.
I have a number of textboxes into which I enter the surname of individuals ... at present the textboxes are set to store all names in Uppercase. Is there coding to return names beginning Mc... or Mac... ie McClOUD or MacDONALD, in the more recognized format. I am sure this has been included in the forum but could not find it in a search of the site.
I have a user form to get some input from the user and want to make sure that in some textboxes user should be able enter only text i.e A to Z or a-z no numbers or special charecters.
Private Sub CommandButton1_Click() Dim RegEx As Object Dim Strng As String
Strng = CStr(Me.TextBox1.Value) Set RegEx = CreateObject("vbscript.regexp") With RegEx .Pattern = "^[A-Z]{2}/d+/d{2}$" If Not .test(Strng) Then MsgBox "Invalid Format: TextBox1" End With Set RegEx = Nothing End Sub ..............................
I created an UserForm that looks for Student Name his/her Conferenece Date through a VLookup.
The following is my code:
Private Sub cmdFind_Click() With frmConference .txtTranslator.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 6, 0) .txtDate.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 5, 0) .txtTime.Value = Application.WorksheetFunction.VLookup(txtStudentName.Value, Sheets("SPANISH").Range("A2:F113"), 4, 0) End With End Sub
The txtTranslator and txtTime works correctly, however txtDate give me a number '40850' not a Date?
I'm trying to create a formula that will added the correct amount in the correct cells, I have create a dunny sheet in trying to achieve this. If Cell B8:B11 = ABS or Dum that any points won should be added to Cell L8:L11 right now its adding it into K8:K11. If Cell B8:B11 = is Blank any player points should be added to cells K8:K11. I'm using this formula throughout cells K8:K28 =IF(J8>J25,1,IF(AND(J8<>0,J8=J25),0.5,0)) Any thing in red is incorrect anything in blue is what I'm trying to achieve.
We receive about 20 sales files of several hundred lines of data each day from various agencies. I want to create a macro / VBA code which checks that the data submitted is correct so that we can upload it into our database without import errors and / or having to manually check each line of data.
I envisage something like an output report:
##################### 149 entries Column A - Date - OK Column B - Customer_Phone - Errors (Should be 11 digits) Row 21 - Customer_Phone - Error (Not 11 digits) Row 108 - Customer_Phone - Error (Contains letters) Column C - Outcome - OK Please correct and re-check. #####################
I have a table with 3 columns of dates and then a column with Set # that I feel in the box #.
I need to see how many items processed for each set per day.
Example: [url]
The problem is that it counts the correct amount but not with the correct dates. The formula that I use is: =SUMPRODUCT(--($I$3:$I$8<>"")*(($C$3:$C$8=39601)+AND($E$3:$E$8=39601)+AND($G$3:$G$8=39601)))
I've got a pretty intense macro already written, a lot of Select Case components. At the end, if nothing matches I'd like to just copy the cell above to the cell below. However, there is a range of about 400 cells in length, so I'd need some sort of wildcard for range.
Rows("2:2").Select Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove Dim Cell As Variant For Each Cell In Range("A1:OL1") Select Case Cell.Value Case "Eng1" Cell.Offset(1, 0).Value = "Engine One" tons more in the middle here Case Else Cell.Offset(1, 0).Value = "N/A"
Rather then returning "N/A", how could I reference the cell above and just copy it instead?
I decided to try to change it into a Case Statement. Here is what I have now. But the problem seems to be this time at this line: When I have "01" in C5 the script just keeps going?
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
For the following code, I'm getting the " Case without Select Case" error (On Case 3 to 5...assuming more are wrong too, but debug can't get there yet). I thought I had it right, obviously don't. Can anyone spot how my code is wrong? ....
I'm trying to compare two range values within a macro to see if they match...if they do/don't I capture and write some other data.
One list is lowercase, while the other list is UPPERCASE. My current macro needs them to be in the same case because I'm using the following to compare: If VPNID.Value = BuildHRName Then
How can I change the format of one of the lists to UPPERCASE or lowercase so that I am comparing apples to apples?