Format Color Of Pivot Chart Data Series
Mar 12, 2008
I'm trying to format the color of the data series in a graph that was produced from a pivot table. The pivot table contains a count of each traffic light in each project phase. eg.
. Traffic Light
Phase Amber Green Red Total
Initiate 1 3 2 |6
Design 5 3 |8
Implement 3 5 |8
---------------------------------------------
Total 4 13 5 |24
From this I have created a bar graph. (graph does not represent above data). Now, I'm trying to get each data series to represent their own colour. Instead of the default formatting. Cause every time I click on refresh data on the pivot table, it resets it to default.
ActiveChart.SeriesCollection(1).Select
With Selection.Interior
.ColorIndex = 45
.Pattern = xlSolid
End With
ActiveChart.SeriesCollection(2).Select
With Selection.Interior
.ColorIndex = 43
.Pattern = xlSolid
End With........................
View 3 Replies
ADVERTISEMENT
Jun 24, 2008
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
View 2 Replies
View Related
Jan 19, 2013
I have a data set that I'm trying to present in a pivot chart and am wanting to use one series to color code or weight another series in the chart. For instance, let's say I have different product categories and two metrics for each, a profit margin (expressed as a %) and a revenue figure (expressed as $s). I want the height of individual bars to represent the profit margin but have the level of opaqueness represent the revenue figures...ie the more revenue associated with a product the more opaque it becomes.
View 6 Replies
View Related
May 16, 2008
Background: I have a Chart sheet with a combination bar/line chart on it. Data is coming from a "datasheet". There is a combo box on the chart sheet that allows you to choose a specific office whose data you want to view. Pick an office from the dropdown and the chart changes. The data is a count of closed cases by month. The data sheet shows 22 Offices with their monthly data, along with entries for each month of the Upper Control Point, Lower Control Point and Mean based on the nationwide data for that month.
The chart itself uses bars to show the office's case count per month, and I've incorporated 3 additional data series to plot the UCP, LCP and Mean as lines for each month.
I'd like to change the color of the bars to be Blue, Green or Red depending on where they fall in the 3 lines. I sort of have it working, but I'm stuck.
The code below grabs the value of each series point and compares it to the 3 control points and does change the colors. I've figured out how to use the If, next to change from one series point to the next, but cannot figure out how to loop through each of the control points. As it stands now, it looks only at the first month's control point and uses that for each successive month.
I hope this is clear and I've tried to keep it as short as possible while still providing enough information.
Sub chartbarformat()
'
' chartbarformat Macro
' Macro recorded 5/15/2008 by vacoyoungd
'
Dim x As Integer
Dim val As Variant
Dim AveragePending As Range
Dim LowerPending As Range
Dim UpperPending As Range
View 8 Replies
View Related
Mar 7, 2014
I have a set of data listed by country, I need to add a new country to the list and I want to keep everything in alphabetical order. My problem is that adding a new series to the range anywhere but the end throws of the series formatting for my chart. The plotted points on my chart are the countries flag, so when everything shifts down a row the flags no longer represent the proper country. Is there an easy way to add the new country and keep my formatting lined up or will I need to redo the formatting for all the alphabetically lower countries?
View 5 Replies
View Related
May 15, 2008
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies
View Related
Nov 2, 2012
I have 2 columns of dates on which 2 separate events occur, e.g columns 1 is dates of receiving incoming calls (and there can be multiple incoming calls , so there are multiple rows with same date) and the other column is dates of outgoing calls (same deal of having multiple rows with same date, each row = 1 outgoing call). I want to plot both as line graphs and find out where they intersect , each one peaks and tapers.
View 2 Replies
View Related
Jul 22, 2014
I am trying to change the color of piechart using the code below:
Code:
Sub ColorPieChart()
Dim i As Integer
Dim myCol(10) As Long
[Code].....
Basically, I want each series in my graph to have the colors formulated by myCol. The code above, however, only colors the graph with color given my myCol(1), so it seems as if something is wrong with my loop.
View 8 Replies
View Related
Apr 23, 2008
it is possible to have the series of a stacked graph to change color based on the source value.
e.g.
i have a stacked cone graph made up of 5 piece (series)
i need each piece colored either green, yellow or red depending on whether its value is large than another
View 5 Replies
View Related
May 31, 2008
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
View 4 Replies
View Related
Jan 16, 2007
im having problem formatting my graph.
chart type = line.
I have 1 series of data, which is N values vs. Time.
Time however, is specified by specific dates. The graph is not putting a plot point accorrding to the date corresponding to the N value.
Example values:
date:____1/1/05 _______ 5/7/05 _____ 8/13/05
n value: __55 ___________ 22 _________ 11
I want the chart to reflect the time between the dates and put a plot point (n value) under each date listed and connect with a line.
View 9 Replies
View Related
Jun 30, 2008
I have a chart with 3 data series. The series are located in columns A, B and C respectively. Series I is a general number anywhere from 0 to 100,000. Series 2 is also a number, but is is devided by series 1. So, if series 1 was 100,000 then series two would be 25,000/100,000 which is 0.25. Series three will always be numerator of series 2 or 25,000 in this example. The numerator, or the 25,000 will never change, so, in my example, series three will be a straight line across the chart because it is always 25,000.
In my example, the .25 is plotted on the left value axes, and series one is plotted on the right value acccess (secondary axis). Series three is just a line in the middle.
My problem is that sometimes the line, series 3, doesn't match the values in both the right and left values axes. So, if series one is 48,000, then series two would be 48,000/48,000 = 1, and series three would be 48000 - the straight line. The third series should be a line touching the 48,000 on the right and the number 1 on the left. It does touch the 48000 on the left, but is below the number 1 on the left.
View 9 Replies
View Related
Jan 16, 2007
I need to format dates on the data labels of my pivot chart. My table has the correct format: dd mmm yy but the chart is showing dd/mm/yyyy.
How do I change this?
View 9 Replies
View Related
Sep 21, 2006
I made a pivot chart. On the X axis are days of the year. I would like the axis to give the months rather than the days, because it is easier to read. But when I select the chart's axis, I don't have acces to any "number" sheet in the "Axis format" section. I could just change the scale.
ActiveChart.Axes(xlCategory).Select
With Selection.TickLabels
.Alignment = xlCenter
. Offset = 100
.ReadingOrder = xlContext
.Orientation = 45
.NumberFormat = "[$-41D]mmmm;@" 'I added this line
End With
ActiveChart.HasPivotFields = False
View 3 Replies
View Related
Jun 22, 2007
if it actually possible to colour data points depending on the colour of the cell of the data it refers to? if not is it possible to colour it any other way
i have uneven amounts of data for weach month but still want the months to be displayed, this is the best way i can think of of doing this
View 4 Replies
View Related
Nov 19, 2013
I have a pivot chart which has one Axis field (Cell Ref2) and one Sum of Values field (which is a table series of percentages calculated from formulas)
I see the graph like I'd expect, but I'm struggling to get it to show percentages rather than basic integer units on the y-axis? Usually I would imagine to just right click on the y-axis : Format Axis, and expect to see something to change the display units, but it is only for hundredths thousands etc rather than a percentage ? The units themselves in the table for that value series are in percentages so I don't see why it isnt showing the percentage units in the first place.
View 1 Replies
View Related
Nov 9, 2006
Trouble: I need to replace address of datacells for serias of chart
Result: data for serias will be some lines above or below as i need
simv = Workbooks(1). Names("adr").RefersToRange.Formula
num = Len(simv)
For i = 1 To ActiveChart.SeriesCollection.Count
oldadr = ActiveChart.SeriesCollection.Item(i).Formula
res = Left(oldadr, Len(oldadr) - num - 3) + simv + Right(oldadr, 3)
ActiveChart.SeriesCollection.Item(i).Formula = res
Next i
simv - my new address data for all serias this code is working on Excel 2003, but not working on some other versions. Beause "Formula" may has different structure :
version 2003: =SERIES(,,'C:...[macros.xls]Sheet2'!$B$8:$M$8,1) other version:
=SERIES('C:...[test.xls]#Source'!$C$6:$D$6,'C:...[test.xls]#Source'!$E$2:$AC$2,,1)
View 3 Replies
View Related
Oct 25, 2007
I have a chart with Data Series being dynamic ranges. There is only one series and x & y each have a dynamic range. I need to be able to include Series Name as a dynamic range.
For example. I have 3 rows of values with 3 columns.
Col 1 Col 2 Col 3
Name X-Val Y-Val
A 1 3
B 4 6
C 8 0
I now need a chart that has 1 series with a x range of col2 and a y range of column 3 but a corresponding name equal to Col 1. So when I move my mouse over each point I get the series name. E.G. I hover over poing 1,3 I show the name as A. Or I hover over point 8,0 I get C.
If it isnt possible using the ranges the way I am, then I would be looking for a possible solution. I am sure I could do this by some sort of loop but not quite sure given the number of rows constantly changes.
View 7 Replies
View Related
Aug 4, 2014
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
View 1 Replies
View Related
Dec 22, 2011
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
View 4 Replies
View Related
Jan 17, 2014
I am trying to produce a line chart, which will use imported data on a separate sheet (but within the same workbook)
The imported data can be of different sizes ie column widths and length. Some columns may contain only zero and should not be included in the chart, and will be to right of the data.
I have created a named range for the data series called ChartData using =OFFSET(Data!$C$1,0,0,info!$C$7,info!$A$2) - C7 and A2 are calculations to set column and row sizes. I have tried to use this as the chart's data series, but without success.
View 4 Replies
View Related
Sep 16, 2006
is it possible to reference part of a data series from a chart to a combo box?
View 3 Replies
View Related
Oct 5, 2006
I want the below code to run from R1C10 (i.e. cell J1) to the end of the data in the row, which will vary in position, rather than having to define where the end of the row will be beforehand (i.e. R1C21).
Is this possible?
View 9 Replies
View Related
May 23, 2008
I have data which is imported from a txt file and always starts at the same row (R19) but is variable in length (end of data R??). I want to be able to select the chart xvalues (R19C10:R?C10) and values (R19C4:R?C4) based on the number of cells with data in them for a given column. In addition I believe I'm having troubles with sheet references, when the txt file is opened the sheet name is set to the file name, since I want to use this macro on many different files I need the sheet referencing code to account for this. Anyway here is the section of code which seems to be giving me trouble (the initial sections just create a new column of data which needs to be referenced as the xvalues) ...
View 3 Replies
View Related
Jun 28, 2008
I think that this is probably rather simple, but the answer is eluding me, I cannot find anything that helps online either. I have a set of data that looks similar to the sample below, however it is quite a bit longer. I would like the 'Effect' as the X axis, with the 'Score' as Y. This basically shows three columns, which is fine. However I would also like to use the 'ID' as the label against each plot point and I'd like each plot point to look the same.
The problem I am having is that to get the labels to show, I am having to add each series manually, which is rather time-consuming. Is there a correct (faster) way of doing this as I think I'm missing something obvious!
IDScoreEffect
12.11
21.92
31.33
41.81
51.53
61.72
72.33
81.42
92.21
102.13
112.12.................
View 2 Replies
View Related
Aug 21, 2006
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
View 9 Replies
View Related
Jan 15, 2014
I'm trying to use some defined names to create charts. Though it works at the very begin, some extremely weird things happen when I try to develop further .....
Attached please find the test file, which simplifies my real case but shows the same problem.
Test.xlsx
In the test file, three names are defined as below:
Line1: "=Xvalue*1"
Line2: "=Xvalue*2"
Xvalue: "=ROW(SampleChart!$A$1:$A$25)"
the chart is very sample: "=SERIES(,Test.xlsx!Xvalue,Test.xlsx!Line1,1)"
So far, it works very well. However, I just simply can't add the second line into the chart, for example, "=SERIES(,Test.xlsx!Xvalue,Test.xlsx!Line2,2)"
I canNOT even change "Line1" to "Line2" in the "SERIES" formula!
View 5 Replies
View Related
Jan 13, 2010
Currently I'm working in an excel file that contains a lot of charts. I want to write a macro that changes the source data of every serie in every chart. It only needs to add extra rows. But as every series has different columns where they get the data from, how can I change the rows without changing the columns?
This is what I've written so far:
Code:
Sub ammend_datarange_series_all_charts()
Dim start_cell As String, end_cell As String
Dim chart_tot As Integer, c As Integer, s As Integer
[Code]....
As you can see I've tried two things, first I tried to change the string of the source data, however this meant that every series would have C and E as their source data. So I wanted to retrieve the x and y values in string format. This does not work yet, it returns an array with the values of all the entries in the series source data. From that array I can not retrieve the column where the data came from.
View 4 Replies
View Related
Jul 15, 2013
At the moment I've got a chart with 3 series lines on it and each line has 12 points. I need to select the 12th point on each series in the chart and create a label for it. The 3 lines are Budget, Forecast and Actual and often the Forecast line hits the same points as the Budget line in the chart and every time I try to find a way to select the last point on the Forecast line, I end up selecting the budget one because it's the one in the foreground.
I can select the forecast line with the keyboard arrows, but not the last point.
I also try to zoom in to get it but one of my charts has exactly the same forecast line as budget line and I still need the forecast line because the forecast will change in future.
I can delete the budget line then add it back, but this is difficult and one I'd have to repeat many times because I'm always making graphs and labelling the final point in a series is something I'm going to have to do more often.
How do I select the last point on the forecast line if it's directly behind the budget line?
View 4 Replies
View Related
Sep 20, 2013
My code inserts charts and then assigns them data series. The problem is that sometimes it likes to grab 5 or 6 extra sets of data series and throw them in there too. I've done some research and it seems that Excel likes to guess what data is going in to a chart when you first add it in and grab some of that, rather than just waiting for me to assign it the data. The sheet I'm doing this on has multiple sets of similar data along row 1, the code crawls row 1 and creates a new chart for each set of station data it finds.
Code:
Sub Make_Chart()
'create bar chart
'prep
Set chrt = ws.Shapes.AddChart.Chart
'add and format chart
[Code] ........
Example data set below. RefCell is set to the top left cell (4.02), n is the length of the raw data in rows.
4.02
ON
OFF
2
0:36:10
0:38:03
0:01:53
[Code] ..........
View 3 Replies
View Related