1) My data is $42,397.40 is there a way that I can format for it to read $42.4?
I tried ROUND function and that did not work.=ROUND(A1,-3)
2) Cell A5 is Data:1/14/09 - 1/14/09. Since I only wanted the date, I used this formula =RIGHT(sheet1!A5,LEN(sheet1!A5)-FIND("-",Sheet1!A5)) which gave me 1/14/09. I need to set the format to look like 1/14/2009 but the data function would not recognize..
I don't know if there is a setting I'm missing or I'm going mad but when I use the round function in VBA it doesn't round.
I am using Excel 2000. See the example attached.
In the cell A2 I have a value 0.525, cell B2 has a formula "=round(A2,2)" which = 0.53, but cell C2 is assigned via VBA ie
Sheet1.Cells(2, 3).Value = Round(Sheet1.Cells(2, 1).Value, 2)
and the result is 0.52??
I have to change the layout of my numbers. At the moment the number have 3 decimal places but rounded to two decimal places and are separated with a dot (value in excel is 272.664 but shown just 272.66). After the macro or excel formula the output should be 000000000027266. So the last decimal places should be deleted (but the amount has still to be rounded!!!), the amount should be without a dot and the number has to be always 15 characters long (like in the example the above just with ceros before the number) I tried it in Format Cells but I couldn’t find anything. If I use the find and replace function to delete the dot, the third decimal place will be shown. Does anyone know if I can format it in excel or using a VBA code to change the number?
View 2 Replies View RelatedI have this formula which works well, but the 3-len part needs to be
dependent on another cells content. Is it possible to have the formula
automatically accommodate for this?
Eg
=ROUND(I36-I37,3-LEN(INT(Q16)))
in cell Q16 is a number 0.010 as displayed, and the sum of i36-i37=
0.007
I need the formula to say ok the minimum division size is in multiples
of Q16 (0.010) and change the 0.007 to either up or down depending on
the calculation.
This works currently, but the figure in Q16 can be 0.1 or 0.00001 etc,
and the sum in i36-i37 could be anything also as it is a calculated
error figure. I need the formula to be able to adapt automatically to
the reference DP in Q16.
Namely the "3-" part in the formula needs to accomodate for the Q16
number format changing.
=IF((OR(A1"",B1"")),IF(ROUNDDOWN(A1,0)=ROUNDDOWN('Sheet2'!$E$1,0),C1,IF(ROUNDDOWN(B1,0)=ROUNDDOWN('Sheet2'!$E$1,0),C1,"")))
All cells in this formula are dates in the format dd-mmm-yyyy h:mm (except C1).
The formula works fine only if I type in a date/time like 09-Jun-2007 0:00 in cells A1 or B1. As soon as I revert to an actual date/time eg 09-Jun-2007 9:53, it returns a #VALUE! error.
If I reference only one cell eg:
=IF(A1"",IF(ROUNDDOWN(A1,0)=ROUNDDOWN('Sheet2'!$E$1,0),C1,""),"")
it works fine with or without an actual time.
I want to use the Round Function where i have a list of dates. I want the Round Function to count the number of dates in the list. I tried to use Round(C4:C16,0), but i didn't work.
View 9 Replies View RelatedI am suspecting that round function is playing a trick on me (N3 = Round(Rnd() * 10, 0) / 10 ). Although sometime it appear to be equal in fact they are not (Reponse = verifie) because of the round function
Sub auto_open()
Dim N1 As Integer
Dim N2 As Integer
Dim N3
Dim Reponse As Double
Dim Compteur As Integer
Dim Score As Integer
verifie = 0
Reponse = 0
N1 = 0
N2 = 0
N3 = 0
On Error Goto ErrorHandler
Score = 0
Randomize
MsgBox "Welcome in the mental calculation program "...............
I've got 2 radio buttons to select if i want roundup or rounddown but i don't manage to get the round down process to work.
View 2 Replies View RelatedI'm trying to round some figures UP to the nearest .5, However i only know this formula: =MROUND(P2,0.5) and that rounds to the nearest .5? Is there anything i can use instead to make sure it is always up not down. so 6.13 becomes 6.50 or 7.53 become 8.00? etc.
View 2 Replies View RelatedIs there a way to add the round function to the current formula in multiple cells at once? I have a worksheet that has many cells that are linked to another worksheet or workbook, and I need all of the cells to be rounded to 2 digits. Can I do this with a macro?
View 5 Replies View RelatedIs it possible to round up or down a 24HR time format.
ie. 18:06 would be 18:00
18:28 would be 18:30?
I want to use a single function to round to nearest 10 e.g. 1036 should round to 1040 and 1032 should round to 1030
View 3 Replies View Relatedformula that would find a text data point (comma) and round the number to 2 decimal places that is located prior to the text data point (comma) within a string of data.
see examples below in Column A and the intended results in Column B.
Column A
Joe 1.234, Al 6.89656,
Sam 6.5,
Column B
Joe 1.23, Al 6.90
Sam 6.50
with a formula that would find a text data point (comma) and round the number to 2 decimal places that is located prior to the text data point (comma) within a string of data. see examples below in Column A and the intended results in Column B.
Column A
row 1: Joe 1.234, Al 6.89656,
row 2: Sam 6.5,
Column B
row 1: Joe 1.23, Al 6.90
row 2: Sam 6.50
I have a forecast which is sorted by product code by week vertically. I need to create a lookup to re-format this information into a horizontal format by week. I have started this by transposing the information as my attachment shows but I am hoping there is a lookup formula which will be easier and quicker. I have attached the actual document and the data I want to sort is Sheet 2. I have started in Sheet 1. I want to look up the code in column A, then lookup the week number which would be B2 in Sheet 1 and return the value of that Code in that week from Sheet 1.
View 2 Replies View Relatedi have a large data in excel sheet A2:C1500 i have attached a sample sheet for it, i want in cell C27 round off sum (as like in cell D27)
View 3 Replies View RelatedI need a function who can recognize the format below and return TRUE or FALSE. See example.
View 5 Replies View RelatedI want to apply conditional formatting in a cell based on the contents of another cell. I can do it if I just want it based off 1 condition (=b151="sample") but would like to if it met 1 of a couple possibilities.
For example, cell H151 I would like to fill green if cell B151 contained the text "sample" or "example". B151 has a list box with about 10 possibilities but I only want a few of those to turn H151 green.
I need a formulat that will ensure that a cell has 12 numeric characters,a dash, and then 3 more numeric characters. I thought this was a simple formula but I cannot get anything to work.
############-###
I am trying to format this function to just return the year, but I can't seem to get it to work. It just returns the full date and all I need is the year.
DateAdd("yyyy", -1, Date)
when ltoj is less than zero the following code enters a period in the cell instead of zero.
If ltoj < 0 Then ltoj = 0
Cells(r, 10) = Format(ltoj * 24, "##.##") 'writes data in correct format
I am working on a spreadsheet that deals with times such as a work schedule, how every the schedule cells are in a time format, and my if function will only return "check"(which is false). my code works if it remove the time formatted cells but i want to keep the document in its orginal format.
=IF(Mngmt!F16="PH","",IF(Mngmt!F16="OFF ","",IF(Mngmt!F16="VAC ","",IF(Mngmt!F16="8:00:00 AM", "MIKE", "CHECK"))))
The bold and under line portion is where my problem is at.
Its looking to the mngmt tab to find f16 when it equal 8:00:00 AM (scheduled time in time format) but returns ""check"(false).
I have bunch of data in the first column but there is always an identifier in this data at different location within each cell of the column. I am thinking the best way is to use the Find function. If true, then format the whole row.
For example: starting in row 10, I want the macro to look in A10, find "AFL" and if "AFL" is found in A10, then format row 10 by highlighting it yellow. Otherwise, highlight it red.
Var1 is a number, for example (3.2354896), displayed on the worksheet as 3.2
Var2 is a number, for example (3.958846), displayed on the worksheet as 4.0
Var3 is text, for example (lunch program)
BullPoint = "greater satisfaction with Var3 (Var2 vs. Var1)"
Range ("A1") = Application.Substitute(WorksheetFunction.Substitute(WorksheetFunction.Substitute(BullPoint, "Var1", Var1), "Var2", Var2), "Var3", Var3)
The result of this is now:
greater satisfaction with lunch program (3.958846 vs. 3.2354896)
What we want to see is:
greater satisfaction with lunch program (4.0 vs. 3.2)
without losing the ".0" for the 4.0, which happens if we adjust the original data, using ActiveWorkbook.PrecisionAsDisplayed. Our preference is not to use this command, as it changes source data.
I have two worksheets which talk together and one of them gives a time stamp using some VBA code
=format(Now(),"dd/mm/yyyy AM/PM"
in the other spreadsheet I have the Now() function which has been working fine. However, when another user went into the spreadsheet went in it, my calculations between the two dates now error. I am presuming its because of the now function not having some formatting defined so is there anyway of changing this value? The cells-formatting will not obviously work as excel is getting confused between the two time types even though the format looks fine. To help the calculation that is messing up is
=IF($L7="","N",IF(DATEDIF($L7,$J$1,"d")>10,"N","Y"))
whereby L7 is the imported timestamp and J1 is now(). The calculation is to show which accounts become inactive after 10 days.
After reading up on the internet I know that to get round the problem I have to make sure that everyone is using the same regional settings. But I just have a couple of questions:-
1. I can understand the date calculation not working on the other persons machine, but when I went back to look at it I was getting the same error. Even though the file is shared, how come my settings didnt 'overwrite' and how come i was affected?
2. Is there a way to make the code work regardless of who opens it in whatever region? Im not sure if there is a fundamental problem but I cant rely on everyone having the same settings because I know that this will cause problems in the longterm.
3. Using the formuale Now(), is there no way of forcing that to a uk date format to stop the errors?
I have created an excel addin, the purpose of which is to run a piece of code attached below in code section, which iterates to each cell of excel and remove merged cells. I am getting a very basic error as my addin is not able to recognize the workbook which is opened and it returns Nothing for ActiveWorkbook object....
View 9 Replies View RelatedI have a workbook that I am working with and I need to formatting the cells so that they will have multiple formulas and I am not sure how to make it work.
Sheet1 Column A is titled 'accounts'. There are 2700 rows under Column A that are being used. Column A is already formatted with a Vlookup formula so I can't add another formula in these cells.
What I need to do is highlight many ranges of these 'accounts' cells depending on their account numbers. I need to input this formula in a separate location on the spreadsheet. For example; If 'accounts' is >=110031100000 AND <=110031100099 then highlight those accounts in 'RED'. and If 'accounts' is >=1200454000000 AND <=120045400099 then highlight those accounts in 'green' and so on...I am not sure how to word the if statement. The formula must reside in column D or greater and not in A.
Am I going about this the wrong way. What I am trying to do is isolate the cells (accounts) that I have referenced on another worksheet so that I can visually notice any accounts that may have been excluded.
There is a spreadsheet I use at work where we are told to use an apostrophe before the date to prevent the function bar from converting the dd/mm/yy to dd/mm/yyyy. Why does the apostrophe do this?
View 4 Replies View RelatedI have an order tracking sheet that has start times in column B, end times in column C and the processing time in column A. The start and end times are recorded in ddmmyy hhmm format (9/1/09 13:30).
On another sheet I have dates listed for each workday. Next to these dates I am wanting a formula/macro that will traverse through column B and provide the number of orders and average processing time that match this. I also plan on recording the shortest and longest processing time next to these.
I saw there were codes to sum or count cells that have a specified Fill Color
http://www.ozgrid.com/VBA/sum-count-cells-by-color.htm
However it says the changing of a cells fill color will not cause the Custom Function to recalculate, I really need to recalculate the data if there are any changes in the selected range