Formula For Alert Or Message
Dec 9, 2009
I have to prepare invoices daily basis..i have to write name in attached sheet i.e cell D7 and Operator name in G13..some time my boss catch my mistake that this operator is for any other company and some time he catchs that this company is for any other operator..
I have a list as there..kindly advise me if my operator is not equal to my company or my company is not equal to my operator as per my list in sheet 1 than a alert massenge should come there so that i would not continue typing till i correct it..
Is there any validation formula or any other advise..
View 9 Replies
ADVERTISEMENT
Jun 11, 2009
I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then
MsgBox "Have Meeting"
End If
End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
View 9 Replies
View Related
Jan 6, 2007
I have an excel sheet with the price of 3 different goods in cells B7, C7 and D8 and I need to display a message reading "Buy Good" underneath the cheapest price. I will be changing around the prices of the goods at a later stage and would like the message to update every time a price change is made.
View 2 Replies
View Related
Jun 16, 2014
I have a table with data in 2 different columns. In the first column there are names of companies given to me by an outside source and they are labeled according to the way this outside company labels them.
In the second coulumn, There are names of the same companies, only this time they are labeled according to the way my company labels them.
I would like to use a formula or any excel function to find when the company name in the first column is at all different from any name in the second. If the name is different, I would like to receive an alert message, or just fill the cell red if it is easier.
View 4 Replies
View Related
Dec 20, 2012
I open a spreadsheet or workbook that has links to other workbooks I am notified by the message bar that content has been blocked. I click Options > Enable this content > OK. Even if I don't make any changes I'm prompted to save changes when I close the file. If I hit Yes or if I hit No, I will still be prompted to enable content in the message bar the next time I open the same file.
I have changed the External Content settings in the Trust Center to "Enable all data connections (not recommended)" and "Enable automatic update for all workbook links (not recommended)" but I still get the messages.
My Message Bar is set to "Show the message bar in all applications when content is blocked" because I read on Microsoft KB that the other option of "never show information about blocked content" will still block the content, just not tell you about it, which doesn't fix my issue.
The files I'm opening and the files linked to and from them are all on the same shared drive on a file server in the office. Is there a way to tell Office '07 that our file drive is a trusted source by default?
View 2 Replies
View Related
Dec 7, 2008
I just discovered VBA coding today and was wondering if I could use it as an audio alert. I found a couple examples online but don’t understand the coding language of excel. I have a feed link from my trading platform to excel that feeds in live data. What I would like to do is have an alert for when Range ("C4").select is >=1000 Alert Ring.wav and when Range ("C4").select is <=-1000 Alert Chimes.wav.
View 5 Replies
View Related
Mar 27, 2007
Each month I get a report that I process using a macro. The problem is that each month the name of the file changes and is different. When I run the macro and it crashes I have to de-bug by going through the code to change all references to the file name from the the previos run and change to the latest file name and then re-run the macro. There must be a better way.
I would like to learn the code that sees the open book and then refers to it for the run.
What is the best way to do this?
View 6 Replies
View Related
Dec 3, 2013
existing workbook that has evolved over several years, there are bits of data spread all over the sheets and there are several sheets.
My question is. Is there a way to show/print/email an alert with a reminder message any time any of the formula cells gets changed, something like "Be aware a formula is being changed, make a note of the changes."
View 8 Replies
View Related
Sep 22, 2006
I created a spread sheet for my four classes and their grades and at this point in the trimester, it has gotten quite long. Too long for me to visually check if a student is missing any work (which I would have recorded with either a 0 or just left blank). I was wondering if there was a way to create a new column with a formula that would tell me if any cell in that row was either blank or had a 0,
View 4 Replies
View Related
Dec 29, 2012
I have a list of products ranging from A2:A28. I have a formula which randomly selects 1 product from this list.
=index(a2:a28,randbetween(1,counta(a2:a28)),1)
and it works fine.
My question is whether or not i can output the results of this formula into a message box?
Title: Your Selected Product Is:
Results: forumla above
Buttons: OK
View 5 Replies
View Related
Jan 29, 2014
I current have a report that assigns a grade based on total points earned / total points possible. I have included this formula
=IF(OR(N42<85%, N42="Auto Fail",Q42<85%, Q42="Auto Fail"),"Please Comment","")
This formula works perfect but I want to modify it to where if text is entered in a specified cell the Please comment message will disappear
View 4 Replies
View Related
Aug 18, 2009
I need to write a formula but excel shows an error message "Formula Too Long." There are two long strings of the formula that I repeat several times. Is there any way to put these strings in other cells and reference them within the formula? Each of the strings looks very similar to this:
View 9 Replies
View Related
Apr 25, 2014
Because countif cannot be used across multiple tabs, I'm using the following workaround where "MySheets" is the range of tabs and E8 is the cell I want "counted".
=SUMPRODUCT(COUNTIF(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented"))
This works perfectly, except that I really need COUNTIFS... I want Excel to count either "Fully implemented" or "Partially implemented" when in E8. I cannot get the formula to work and keep getting an error message.
=SUMPRODUCT(COUNTIFS(INDIRECT("'"&MySheets&"'!E8"),"Fully implemented",(INDIRECT("'"&MySheets&"'!E8"),"Partially implemented")))
View 1 Replies
View Related
Aug 11, 2008
I'm looking to put a formula in the last column (Card Valid/Invalid (N3:N8)).
I want this formula to say IF Project Name OR Start date OR Due Date or Type OR Author OR VS are empty then I want the last column to say Invalid else if all of these columns are filled in then give valid. Also if a completed date or no. of review loops are filled in but not both then give Invalid but if both are filled in then as well as all the rest of the info give Valid.
Project Name - Valid/Invalid is B2-N2
View 19 Replies
View Related
Oct 29, 2008
I am trying to add a sound alert to a junior athletics recording program. The date of the meetings is in column (A), results are entered in column (B) for a particular event, say 100m sprint. Column (C) & (D) contain formula that recognise if that athletes result is a personal best (PB) result or a club record (CR). I am after a code that will play a sound when a new PB or CR has been achieved. I have downloaded the sounds I want into the office media file. I am new to VB codes. Any suggestions?
View 14 Replies
View Related
Mar 8, 2007
In ("a1") i have a time e.g 12:30
in a2 it is 1:40 ......................etc
i want a vba code that play a file.wav when the time exactly as in a1 then play it agin when it as in a2 repeating it self to .............a12
View 9 Replies
View Related
Oct 28, 2009
I have this
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("A1") >= 2 Then MsgBox "Check: " & Me.Name, 64
End Sub
but I need to get a msgbox when the value of A1 is >= 2, then when the value is >= 4, then >=6, then >=8 , ............
the value of A1 is going to be increasing by decimal points as I enter data.
View 9 Replies
View Related
Jan 22, 2008
I have the following code to compare two columns and delete adjacent rows if 1 is greater than or equal the other...
Sub LastReceipt_GT_Confirmed()
Dim intLstRow As Integer
For intLstRow = Range("E" & Rows.Count).End(xlUp).Row To 2 Step -1
With Range("E" & intLstRow)
If .Value > .Offset(0, 1).Value Then .EntireRow.Delete
End With
Next intLstRow
For intLstRow = Range("E" & Rows.Count).End(xlUp).Row To 2 Step -1 .............
View 9 Replies
View Related
Nov 25, 2008
I have a chart that's being updated with different values when I cklick on different radiobuttons. When the cells that the radio button refers to is empty or the calculation in the cell have an error it pops up a message that I need to click OK to go on. Is there a way to stop these alerts by writing a script that shuts the alert messages off during each click?
View 2 Replies
View Related
Jan 13, 2014
I entered an activex object command thing.. and now I'm not sure how to exit out of it.. it just keeps alerting errors messages like reference is not valid and other ones depending on what I type in the formula box.
I just want to remove the object, but I can't get past the error alerts.. they just keep coming every single time I click somewhere on the workbook trying to exit out of it.. so I'm not sure how to even get out of it.. I don't want to open up Task Manager to exit out of the entire program because I didn't save my workbook.
View 2 Replies
View Related
Jul 31, 2014
How to create a macro which would search through certain columns and post an alert/notification with the employee name (at the top of the column) and date (to the left of the column) if the cell value is less than 12.
View 2 Replies
View Related
Oct 3, 2009
If I already have lets say 90% on B9 and I try to enter 15% on D9 it wont allow me because of the total being over 100%, but how can I have an alert to say Please enter 10% or less.
Or
If I already have lets say 50% on B9 and I try to enter 20% on D9 and I try to enter 50% F9 it wont allow me because of the total being over 100%, but how can I have an alert to say Please enter 70% or less (the sum of B9+D9).
Can this be done using VBA?
I've attached the file that has the data validation.
View 11 Replies
View Related
Aug 30, 2012
I have the below VBA code which does not seem to be working. I want to have an email alert as soon as some Excel is saved. THis is the code I am using. Office 2007 is used, I have Enable all macros under trust centre settings.
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean) Dim OutLook As Object Dim OutMail As Object Const SendTo As String = "ab@xyz.com" Set OutLook = CreateObject("Outlook.Application") OutLook.Session.Logon Set OutMail = OutLook.CreateItem(0) With OutMail .To = SendTo .Subject = ThisWorkbook.Name & " is updated" .Body = " Needs your attention!" .Send End With Set OutMail = Nothing Set OutLook = NothingEnd Sub
View 7 Replies
View Related
Jun 18, 2014
Is there any way to get Excel to disallow you to enter in unique values into the same column? Like I know you can search for and delete duplicates, but I am wanting to get excel to disallow duplicates from being entered and/or give me an alert that what I just entered is a duplicate.
View 4 Replies
View Related
May 18, 2007
I have a worksheet with various information contained in each row and using up to columns M. Each row represents a new product and new products/rows are added weekly. In columns H is the date which is formatted like "*14/03/2007" and displays as that.
What i want to do is when the 11 months have past since the date in the cell i would like the cell colour to change to YELLOW. When 12 months have past then i need it to change to RED.
Example:
Date in cell is 18/05/2007
When date reaches 18/04/2008 i want the cell to change to YELLOW
When date reaches 18/05/2008 i want the cell to change to RED
I would like the code to apply to all cells in column J.
View 9 Replies
View Related
Jun 1, 2009
I am trying to set up a warning. If an amount is entered in columns u,v, w a warning box to appear telling the clerk to enter a comment in col ab or what I would really like is if they enter an amount the cursor jumps to comments with a command for them to write an explainations.
Do you have a way to do this. (excel 2007)
Col U V W X AB
Held Amount
Write-off AmountTransfer from Proj. to Proj. AmountFinal Invoice
Amount
Comments $ 5.00 $ - $ - $ 273,143.29
View 9 Replies
View Related
Jan 6, 2007
My macro cuts and pastes a section of one sheet over the top of each remaining sheet in the workbook. It pauses before each paste and presents a message box (relating to copying over a named range) requiring the user to manually click on "Yes" in response to the question before continuing on. How can I modify my macro so that it finishes without requiring the user to click on "yes" for each sheet. In other words, how do I get the macro to automatically answer "Yes" to the message box ??
View 2 Replies
View Related
Jan 10, 2007
I have to send some data on hourly basis i have a macro that extracts the data from the master sheet and creates a new workbook for the same and saves the same. Problem that i am facing is that i need to save the file with the same name. and on doing that it shows a pop up that do you want to replace existing file. Is it possible to stop this pop up. Code that i am using to save the workbook:
ActiveWorkbook.SaveAs Filename:= _
"C:Documents and SettingsAmritDesktop Training Scedule For Next Hour.xls" _
, FileFormat:=xlNormal, Password:="", WriteResPassword:="", _
ReadOnlyRecommended:=False, CreateBackup:=False, ConflictResolution:=xlLocalSessionChanges
View 2 Replies
View Related
Apr 20, 2007
I have several linked files to a master excel document that uses filters.
Unfortunately, if I dont remember everytime to turn off the filter before I exit the file, the other files read data incorrectly.
I could set up an alert/notification that tells me these filters are still on before I exit the file?
View 4 Replies
View Related
Sep 20, 2007
I am trying achieve the following. I have bracketed each part seperate part for clarity.
(if a1+b1+c1 = 10 or more), and (a2 = 10 or more) and (b2 = 10 or more) (then sound an alert) (and display the number 1 in d1) (if not ignore).
I can do parts of the formula but i am getting very very confused trying to combine them together. I am trying to make this formula work in d1.
Can anyone tell me if this is a valid piece of logic that can be represented by an excel formula.
View 6 Replies
View Related
