Fill Mismatch Cells - Receive Alert Message?
Jun 16, 2014
I have a table with data in 2 different columns. In the first column there are names of companies given to me by an outside source and they are labeled according to the way this outside company labels them.
In the second coulumn, There are names of the same companies, only this time they are labeled according to the way my company labels them.
I would like to use a formula or any excel function to find when the company name in the first column is at all different from any name in the second. If the name is different, I would like to receive an alert message, or just fill the cell red if it is easier.
View 4 Replies
Dec 9, 2009
I have to prepare invoices daily basis..i have to write name in attached sheet i.e cell D7 and Operator name in G13..some time my boss catch my mistake that this operator is for any other company and some time he catchs that this company is for any other operator..
I have a list as there..kindly advise me if my operator is not equal to my company or my company is not equal to my operator as per my list in sheet 1 than a alert massenge should come there so that i would not continue typing till i correct it..
Is there any validation formula or any other advise..
View 9 Replies
View Related
Jun 11, 2009
I wanted to make a pop up alert message appear whenever the formula in a cell gives a particular output.
Before posting this i tried looking for similar posts before, but the ones found do not solve my problem. There it asks me to write the following code in VBA,
Private Sub Worksheet_Change(ByVal Target As Range)
Dim MyRange As String
MyRange = "A1"
If Me.Range(MyRange).Value = "Have Meeting" Then
MsgBox "Have Meeting"
End If
End Sub
But my doing so, I can not use any formula in the cell A1 or any other cell i give reference as MyRange. I will always have to physically type "Have Meeting" or any other word assigned in the above.
View 9 Replies
View Related
Jan 6, 2007
I have an excel sheet with the price of 3 different goods in cells B7, C7 and D8 and I need to display a message reading "Buy Good" underneath the cheapest price. I will be changing around the prices of the goods at a later stage and would like the message to update every time a price change is made.
View 2 Replies
View Related
Sep 3, 2007
I am using the code below but it is coming up with a type mismatch error message and I'm not sure why? how I can stop this?
Sub PhilsCode2()
Range("A3:AE382").Select
Selection.Interior.ColorIndex = xlNone
Selection.Font.ColorIndex = 0
Selection.Font.Bold = True
Selection.Font.Bold = False
Range("A3").Select
Dim myRow As Long
Dim myValue As String
myOverall = 31
myGoalsCol = 14
myRow = 3
View 9 Replies
View Related
Dec 20, 2012
I open a spreadsheet or workbook that has links to other workbooks I am notified by the message bar that content has been blocked. I click Options > Enable this content > OK. Even if I don't make any changes I'm prompted to save changes when I close the file. If I hit Yes or if I hit No, I will still be prompted to enable content in the message bar the next time I open the same file.
I have changed the External Content settings in the Trust Center to "Enable all data connections (not recommended)" and "Enable automatic update for all workbook links (not recommended)" but I still get the messages.
My Message Bar is set to "Show the message bar in all applications when content is blocked" because I read on Microsoft KB that the other option of "never show information about blocked content" will still block the content, just not tell you about it, which doesn't fix my issue.
The files I'm opening and the files linked to and from them are all on the same shared drive on a file server in the office. Is there a way to tell Office '07 that our file drive is a trusted source by default?
View 2 Replies
View Related
Apr 6, 2014
I have the following code, but I get a error message "13 Type Mismatch".
I need to add up all the values for text boxes named Total1-10 and return the result into textbox Subttl as a $0.00 format.
[CODE]
Private Sub Total1_change()
Subttl.Value = Format((CInt(Total1.Value) + CInt(Total2.Value)), "$#,##0.00")
End Sub
Private Sub Total2_change()
Subttl.Value = Format((CInt(Total1.Value) + CInt(Total2.Value)), "$#,##0.00")
End Sub
View 6 Replies
View Related
Dec 7, 2008
I just discovered VBA coding today and was wondering if I could use it as an audio alert. I found a couple examples online but don’t understand the coding language of excel. I have a feed link from my trading platform to excel that feeds in live data. What I would like to do is have an alert for when Range ("C4").select is >=1000 Alert Ring.wav and when Range ("C4").select is <=-1000 Alert Chimes.wav.
View 5 Replies
View Related
Nov 4, 2006
I'm trying to write a Macro that, in the active sheet (which contains plenty of data), deletes rows according to several criteria, for example:
- if cell(i, ar1(j)) = ERROR, delete row i and shift 1 up
(ar1 is an array of column numbers)
- if cell(i, ar3(j)) = 0, delete row i and shift 1 up
(ar3 is another array of column numbers)
Etc.
The problem is that, when I run it, I get a "Type Mismatch" error message, and I don't understand why. Here is the
Sub Delete_invalid_rows()
Dim i%, j%
Dim Nr%, valid As Boolean, BYPdata As Boolean
Dim ar1, ar2, ar3, ar4 As Variant
Nr = 1379
ar1 = Array(11, 14, 19, 20, 22, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 64, 65, 66, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 104, 106, 107, 109, 112, 116, 126, 127, 128, 129, 131, 133, 134, 135, 136, 137, 138, 139, 140, 142, 143, 145)..............
View 6 Replies
View Related
Jun 28, 2013
Right now when I send/receive an HTTP request, I have the text displaying in a MSG Box. I want to just have the text inserted into cell A1 instead. I know I have to alter MsgBox MyRequest.ResponseText, but anything Ive altered it to, doesn't seem to work.
Code:
Sub http()
Dim MyRequest As Object
Set MyRequest = CreateObject("WinHttp.WinHttpRequest.5.1")
MyRequest.Open "GET", _
"Google"
' Send Request.
MyRequest.Send
'And we get this response
MsgBox MyRequest.ResponseText
End Sub
View 2 Replies
View Related
Mar 27, 2007
Each month I get a report that I process using a macro. The problem is that each month the name of the file changes and is different. When I run the macro and it crashes I have to de-bug by going through the code to change all references to the file name from the the previos run and change to the latest file name and then re-run the macro. There must be a better way.
I would like to learn the code that sees the open book and then refers to it for the run.
What is the best way to do this?
View 6 Replies
View Related
Sep 22, 2006
I created a spread sheet for my four classes and their grades and at this point in the trimester, it has gotten quite long. Too long for me to visually check if a student is missing any work (which I would have recorded with either a 0 or just left blank). I was wondering if there was a way to create a new column with a formula that would tell me if any cell in that row was either blank or had a 0,
View 4 Replies
View Related
Aug 1, 2014
I have a VBA code that when activated it copies 6 cells from sheet1 to the next available row in sheet2 - A2:F:2.
alerting and stopping the routine if any one of the cells in sheet1 are empty so the user has to input into all cells before the routine will execute.
does it need a check cells for content if error highlight empty cell.
View 7 Replies
View Related
Nov 7, 2008
how to enter data in non-adjacent cells using a fill command.
Here is what I am trying to do:
in the column, I am holding ctrl button to select every 10th cell down the sheet. I need to enter a date in every selected cell that is exactly 7 days apart, i.e., 11/7/08 then 11/14/08 then 11/21/08, etc.... but no other dates or data.
I have tried to figure out a way to do this other than manually, but am confounded.
View 9 Replies
View Related
Feb 18, 2014
I want to lookup for 160990 (B12), and if the value is found, I want the values returned to be the ones in A9,B9,C9. But when I lookup 00002 (B17), the values returned to be the ones in A15,B15,C15.
I have ~200pages, but I don't need all the data, I only need to lookup some values I already have in another Excel file. I have a weird format because I converted the file from a PDF.
View 2 Replies
View Related
Jan 25, 2013
I have created a search all sheets function in VB in excel in a Module. All results are populated to a listbox in a userform.
What I want to do is, as soon as I select 1st result in the listbox, it must Jump to cell where the result was found.
If need be, I can mail you the excel sheet.
View 9 Replies
View Related
Jan 21, 2009
i have the following kind of table
Raw Material ReportDateDetailOrder Given Received Opening Balance25-Oct-07order to Johson50029-Oct-07Receive from jonson10014-Jan-08Receive from jonson 5405Pending sum500505-5
as you can see that the pending order (receivable from johson) is -5 as we reveive more then order given.
i want here that when we receive more than order as in this table the pending must be shown 0.
i can do it by apply the condition when pending is
View 9 Replies
View Related
Aug 28, 2013
When the workbook opens, sheet 1 is selected. There is an activex textbox on sheet 1 that should receive focus.
using "textbox1.setfocus" or textbox1.activate" does not accomplish what I need. I have also applied this the setfocus and activate to the worksheet open event but without success.
VB:
Private Sub workbook_open()
Worksheets("regular sku").Select
TextBox1.SetFocus
Worksheets("regular sku").ScrollArea = "I1:T36"
End Sub
View 4 Replies
View Related
Jun 5, 2008
I am trying to run the 'loop through a folder' code on multiple workbooks I receive.
The workbooks I receive are full of drop downs that have associated values of 1-3 on the first sheet. (About 100 in total) This particular workbook has the drop downs on one worksheet and the numeric results on another worksheet 'Results'
The second workbook 'Totals' (very basic) , just referenced each 'Results' worksheet and had equations that averaged all the drop downs cell by cell.
I would love to be able to use the 'loop through a folder' code to open them and then average them on the 'Totals' sheet. The main reason is that I am delegating this to another person and would like to eliminate the risk or human error. ( unless it is my own)
I am a total VBA n00b. Any assistance would be appreciated.
If needed I can upload the code or sheet as an example.
The base folder would always be the same. ie c: estresults*.xls
The naming would be very similar.
This loop code seemed relevant as it did not seem to require any file naming and would run through a folder and process all XLS files.
[url]
View 14 Replies
View Related
May 23, 2014
I have a situation where I have about 20000 lines to populate and looking for a quicker alternative. I have duplicate numerical values in the lookup_value. I want the same number to appear for all lookup_value's but there is only one instance of that value on the other sheet I am searching. My table looks like this:
lookup_value
50058459
50058459
50058459
50058459
68594523
68594523
68594523
58965214
Table_array
Column A Column B
50058459 1234
68594523 9876
58965214 3456
I want my output of vlookup to look like this
Column A Column B
50058459 1234
50058459 1234
50058459 1234
50058459 1234
68594523 9876
68594523 9876
68594523 9876
58965214 3456
View 7 Replies
View Related
May 20, 2013
The code below works nicely to insert a time stamp in column B when the user selects "Yes" in the corresponding cell in column A. The problem is if I try to delete any rows or clear the contents of the cells I receive a "Run-time Error 13 - Type mismatch." If I delete the contents of the cells one at a time I do not receive the error. What I am trying to do is the user has a list of items to select from in column A. Only if "Yes" is selected I want the time stamp in column B to appear.
Code is below.
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
With Target
If .Value "Yes" Then Exit Sub
If Not Intersect(Range("A1:A50"), .Cells) Is Nothing Then
Application.EnableEvents = False
With .Offset(0, 1)
[Code] ......
View 6 Replies
View Related
Feb 7, 2013
I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
View 7 Replies
View Related
Aug 11, 2008
I would like a macro that when run, finds empty cells in a column within the used range and fills them with the same formula in the other cells in the same column but relative to the row.
I have a basic understanding of VBA so if someone can set me on the right track i'll have a go myself as i appreciate this would take a while to write out from scratch.
View 9 Replies
View Related
