Formula Using Arrow Icons To Show Trend
Nov 16, 2009
I'm trying to create a formula where I can show the trend of two values from one month to the next that shows wheather the results went up or down in a positive or negetive value. For example:
If I have a transfer % of 18% in October and November MTD is at 17% - the arrow would then reflect downward showing in green, as the lower percentage is better. but I need the arrow to show upward in Red if say the value for November MTD was 19% instead.
I tried conditional formatting and attempted an "If" formula. I must not have all the information to create the formula as it errors out on me. I can create it if only looking to reflect one arrow...
=if(c3<b3,"")
View 6 Replies
ADVERTISEMENT
Dec 17, 2003
I have just made my first menu using VBA code. I would like to include icons on the buttons
View 9 Replies
View Related
Apr 17, 2007
I have created a drop down list but notice that the button (the arrow in the square) does not show up unless I click on the cell. Is there a way to show the button at all times so the user knows a drop down list is available?
View 9 Replies
View Related
Aug 5, 2008
1. I use a number of x,y pairs
2. From x,y pairs I produce "scatter" type chart
3. From the chart I get trend line and its equation e.g. 5-order polinominal
4. I convert equation into excel formula
5. I apply formula onto the same range of x argument and produce graph
6. The graph is very much different from the trend line!!! I would expect exact match as I use equation/formula for the trend line.
View 9 Replies
View Related
Jan 10, 2014
Ok so heres an example workbook:
Book5.xlsx
As you can see from the workbook, each column's amount of numbers depends on the data pulled from an index/match function.
These numbers will change and I want the TREND function to dynamically change with the data.
View 4 Replies
View Related
Jun 6, 2012
I am having trouble copying a charts trend formula into a cell.
the best I can do is select it as follows:
ActiveSheet.ChartObjects("Chart 4").Activate
ActiveChart.SeriesCollection(1).Trendlines(1).DataLabel.Select
I know you can work it out using linest, but this chart uses a polynomial to the degree of 3 to 5.
View 2 Replies
View Related
Jul 15, 2009
I have been using Excel for some time now but just started working back with the Macros! Finally figured out that you had to turn on the Designer tab to get to some of the functionality of the macros. I havent been able to find ANYTHING ANYWHERE to tell me how to create buttons or Icons in the 07 Excel!
View 2 Replies
View Related
Sep 11, 2009
I want to transfer my Excel-icons. Some of them are custom buttons where I have added user-defined functions. Is there any way I can do this? A list of icons with their function or purpose is OK as well.
View 4 Replies
View Related
Feb 19, 2008
microsoft toolbar buttons as I'm not especially artistic, but would like more choice when creating custom buttons ?
View 3 Replies
View Related
Dec 21, 2012
I like to mark names of persons who have done consecutively well in last two years with green circle and those who have not with red circle using Icon sets. I have created 4 columns and filled 1st with names (Text), and other 3 columns are filled with their output scores (Numbers) over last three years (2010-12). Like to highlight those names who have done well in last two years (2011-12) as compared to the third year (2010).
For example:
Names Score 2012 Score 2011 Score 2010
John 168 153 144 (should mark with green circle)
Steve 201 182 181 (should mark with green circle)
Mary 98 102 110 (should mark with red circle)
View 7 Replies
View Related
Aug 14, 2007
I've just finished writing some vb code that i need to assign to a button. Trouble is I select the control toolbox and put it design mode and all of the icons with the tool box are greyed out. pic attached below
pukks Auto Merged Post;Doh Doh and double doh!
Problem solved: I inadvertently had selected more than one worksheet tab and this was stopping me from placing a button on the worksheet.
View 2 Replies
View Related
Feb 17, 2014
Is there any method to change the placement of conditional formatting icons. By default, the icons appear at leftmost part of the cell. Is there any way the icons appear at the centre with percentages (see attachment).
File: Sales Comparison - New Outlets 2012.xlsx
View 3 Replies
View Related
Oct 24, 2013
I've created some macros in Excel 2010 which I've added to the Quick Access Toolbar and want to show them using some of my own icons rather than the ones that show when you click the 'Browse' button. There is no option to navigate to any other location.
Is it possible to access icons other than the set provided?
View 2 Replies
View Related
Jun 5, 2007
When adding functions to the quick access toolbars in Excel 2007 sometime they do not have an associated icon with the function. The icon shows as a green circle. How to change the icons and also to have a selection of icons like you have had in previous versions of Excel?
View 5 Replies
View Related
Mar 3, 2009
I ran a simple macro that I created in my workbook, got a run-time error, clicked debug, clicked reset to stop the macro running, and now all of the icons in my workbook are greyed out. I can select cells, change worksheets, enter information in cells etc....just I can't save the workbook, or select any of the icons on my ribbon / in the office menu. Would really like to avoid terminating the application as I made a number of changes that I didn't save (doh doh doh).
View 9 Replies
View Related
Jan 6, 2009
I have two columns where TREND does not work well. I want to calculate the TREND value of Column 2 (PERCENTILE RANK) based on a new RAW number. If I TREND between just the two rows, the value is fine (i.e. If I TREND between 105 and 110 RAW, I get the right PERCENTILE RANK if the new X value is 106 (which is 15.3% PERCENTILE RANK). How can I make a formula that will only look at the two rows and TREND just those two rows to give me the right PERCENTILE RANK.
RAW PERCENTILE RANK
10514
11020.4
11121.8
11729.5
11833
12342.5
12444.5
12954.4...........
View 5 Replies
View Related
Apr 2, 2009
I'm trying to figure out how to do seasonal forecasting based on volumes. I tried to use FORECAST but the numbers are not accurate.
I have actual data to work with to come up with my forecasting on a monthly basis. Our yearly calender is from Nov 08 to Oct 09.
Here's a sample of the data....
View 12 Replies
View Related
Jan 12, 2010
I have a simple x y scatter graph, to which i have a trend line running through it, fine.
what i need to do is fine some values according to that trend line. e.g. my X axis goes up to 60 and my Y axis goes to 10, so if i draw accross at 55 from the trend line, i then go down to a number on my Y axis.
View 14 Replies
View Related
Dec 14, 2008
What I have is a column (column A) that only has two data entries at any one time.
I need column B to fill in the trend of those two data points.
My problem is I don't know how to deal with the cells that say #N/A. Which is every cell other than the two cells with data.
If I replace the #N/As with say 1, then it messes up the trend data points.
It seems like I need to be using the trend command, but any solution would be welcome.
View 14 Replies
View Related
Nov 23, 2011
When using the Trend function, I can get the value for individual future periods. I then can get a total for the year by summing each individual future period.
What I don't know how to do is sum them all using one formula. For instance, If I know the values of periods 1-5, how would I write a formula that would sum the future values (in one cell) of periods 6-12 -- without having to sum each future period individually?
View 3 Replies
View Related
Sep 6, 2006
I am trying to use VBA to find a value on a trendline. I have been unable to call the TREND function from Excel, and I can't see what I'm doing wrong. I'm using the following line of
point25 = WorksheetFunction.TREND( Range("d2:d25"), Range("c2:c25"), 25)
I keep getting "Runtime error 1004 - Unable to get the Trend property of the WorksheetFunction class".
View 9 Replies
View Related
Oct 5, 2006
I need to analyse trends between a range of cells. The idea is to display an image of a triangle pointing up if the percentage between the current month and the previous is bigger, a triangle pointing down if the percentage has decreased or a rectangle if both months are the same. I've tried to build a userform to ask the user to input the range and then analyze the data...with no luck at all.
View 9 Replies
View Related
Jan 4, 2007
I am using the Forecast formula to give me a value from a Linear trend. However I need to limit the resulting value that is displayed within a min and max value. Background: This is to allow me to calculate the amount of bonus someone will earn depending on the Percentages of their target they achieve. The min bonus is 25% when 80% of target is achieved and max bonus is 100% when 125% or greater of target is achieved.
So the Forecast formular works great using the existing values, but i need help limiting the results to between 25% and 100%. I was trying to use a sumif formula to copy the resulting cell but only if the value fell between the 25 and 100%. I've attached the spreadsheet as I think it will highlight what i'm trying to do better than I can explain it.
View 2 Replies
View Related
Mar 3, 2007
I am trying to use the TREND worksheet function on a vba array. I keep getting Runtime error 1004: Unable to get the TREND property of the WorksheetFunction Class. I can bypass the error (like it were a search with no result), but I get no result of any kind from the function. My search of other threads yields nothing concrete, but causes a guess that it may have to be used on a worksheet range not a vba array. But that's not actually stated in any of the threads, and I find no documentation to that effect. Is this the issue or is it something else altogether?
Sub test()
Dim knowny As Variant
Dim knownx As Variant
Dim newx As Integer
Dim myval As Integer
knowny = Array(2, 4, 6, 8, 10)
knownx = Array(1, 2, 3, 4, 5)
newx = 6
'On Error Resume Next
myval = Application.WorksheetFunction.Trend(knowny, knownx, newx)
' 'next error, err as normal.
' On Error GoTo 0
' Err.Clear
Debug.Print myval
End Sub
View 5 Replies
View Related
May 31, 2007
Ive got an inventory of about 2000+ items as well as items that can be broken down into more specific groups such as colors, designs and sizes. What i want to know is how to get the correlation, thats excel function CORREL(), of each item for the time weve had it. The data I can provide is the monthly quanitity sold of the item.
For example I have item A.
Sold Month
5 1
7 2
4 3
5 4
and so on. Easy enough to do. My only problem is I would have to manually do that 2000+ times for my entire inventory to figure that out. What I wants is a command that can verify my item code, which is simple enough as I can convert the item code to something as simple as a string or leave it as is. Not every item has been in the system an equally long time though. If that were the case i could just copy it with blank cells to fill the space and copy and paste all the way down. So I need to find a way to get an IF statement to correlate the corresponding cells IF the item number matches the target cell. What I have right now is something to this extent.
=IF('2'!$A:$A,A1,CORREL('2'!$B:$B,'2'!$E:$E))
View 4 Replies
View Related
Dec 5, 2007
On top of these graphs, i draw a line (insert a line shape) corresponding to a certain gradient in the data presented. I do not want this line to be exact (i.e. not point to point) as it is best to be drawn by eye so that the general 'gist' of the data can be found. What i would like, using any method available, is to be able to find the gradient of this line i have just drawn which obviosuly must be done taking into account the scale of the graph. The scales of the graph will not be consistent across all applications.
View 4 Replies
View Related
Apr 22, 2006
1:
Does a code exist to do Shift Key_Arrow Right, Arrow Down and then select that range to Copy?
I know the arrows codes but was told by someone no code can ever exist for a Shift Key.
I need to select a range after a "Search For" but the Range is not determined by the actual Cell ranges.
My Code for Arrow keys are:
'Selection.Offset(0, 1).Select '*Right*
'Selection.Offset(0, -1).Select '*Left*
'Selection.Offset(-1, 0).Select '*Up*
'Selection.Offset(1, 0).Select '*Down*
'Selection.Offset(3, 0).Select '*Down * 3 Cells
2:
What is the macro code to insert more than 1 row ?
The code I use to insert 1 Row is :
Selection.EntireRow.Insert
Sometimes I need to insert 25 rows.
View 9 Replies
View Related
Oct 27, 2006
probably this is easy but i can not find it. i have created an userform and would like to add an arrow (<----->) on it to accentuate something. How can i add an simple arrow or line on a userform
View 3 Replies
View Related
Jun 24, 2014
I've created a graph from data and need to add an average/net impact/trend line to the graph. From what I've read this needs to be an XY scatter, however, several efforts later and I can't seem to get it to work for me.
0514_Costs_DRAFT_ExcelF.xlsx
View 1 Replies
View Related
Jul 15, 2014
i have a stacked bar chart, similar to this: [URL] What i need is a trend line, similar to this: [URL] that shows the average of the bottom bar to date.
View 14 Replies
View Related
