Trend Line On Stacked Bar Diagram?
Jul 15, 2014i have a stacked bar chart, similar to this: [URL] What i need is a trend line, similar to this: [URL] that shows the average of the bottom bar to date.
View 14 Replies
ADVERTISEMENT
Excel 2010 :: Combining 100% Stacked Column With 100% Stacked Line Using 2 Groups Of Data?
Apr 24, 2014I am trying to create a 100% stacked column which has a superimposed line chart over the top of it.
Basically % of yes and no for two separate datasets, but which share the same characteristics. The x-axis is months of the year.
CSP Yes
CSPNo
All Yes
All No
Apr-13
6
19
[code]....
I can create 2 separate charts. One for the yes/no of one set as a 100% stacked column. I then use 'no fill' on the No column to stop this from being seen.
I can create a 100% line chart for the second data type, and 'no fill' the 100% line that appears.
However, I can't merge the two charts to show the Yes % for one dataset as bars and the Yes % of the other as a line.
I am using Excel 2010 on XP.
Put In Trend Lines When Creating Stacked Column Chart?
Apr 3, 2012Is it possible to put in Trend Lines when creating a stacked column chart?
I've tried in Excel 2003 and 2010 but it doesn't appear that it is possible.
Getting Values Off A Trend Line
Jan 12, 2010I have a simple x y scatter graph, to which i have a trend line running through it, fine.
what i need to do is fine some values according to that trend line. e.g. my X axis goes up to 60 and my Y axis goes to 10, so if i draw accross at 55 from the trend line, i then go down to a number on my Y axis.
Formula For The Trend Line.
Aug 5, 20081. I use a number of x,y pairs
2. From x,y pairs I produce "scatter" type chart
3. From the chart I get trend line and its equation e.g. 5-order polinominal
4. I convert equation into excel formula
5. I apply formula onto the same range of x argument and produce graph
6. The graph is very much different from the trend line!!! I would expect exact match as I use equation/formula for the trend line.
Add Line To Chart To See Trend
Dec 5, 2007On top of these graphs, i draw a line (insert a line shape) corresponding to a certain gradient in the data presented. I do not want this line to be exact (i.e. not point to point) as it is best to be drawn by eye so that the general 'gist' of the data can be found. What i would like, using any method available, is to be able to find the gradient of this line i have just drawn which obviosuly must be done taking into account the scale of the graph. The scales of the graph will not be consistent across all applications.
View 4 Replies View RelatedBar Chart With Trend Or Average Line (XY)
Jun 24, 2014I've created a graph from data and need to add an average/net impact/trend line to the graph. From what I've read this needs to be an XY scatter, however, several efforts later and I can't seem to get it to work for me.
0514_Costs_DRAFT_ExcelF.xlsx
Stock Chart With Trend Line
Feb 8, 2007I want to show a stock chart in Open-High-Low-CLose format, then I hope that a trend line can be displayed at the same chart, what can I do? It seems like that stock chart can't be merged with another chart
View 7 Replies View RelatedExport Graph Trend Line Equation
Jan 17, 2014Is there a way to get an equation for a trend line and have excel automatically export the equation to a cell where it can be used. The only way i currently know how to do this is to manually type the equation.
View 8 Replies View RelatedTREND Function Calculate 2 Possible Y Values Along A Line
Mar 25, 2014I currently have in my equation the trend function to linear extrapolate the date a line would cross either my upper or lower limits (100.1 and 19.9) between 2 data points. However if the 2 data points span both the upper and lower limits (as per the 2 attached examples) then unfortunately the trend function is only able to return the 1 date (where I've specified the x value). Is there any way for the TREND function to trend the 2 values? Do I simply add the 2nd x value to the new x's?
I have attached both the data and their graphs to visually explain my problem : EF Workbook.xlsx
Exponential Trend Line Is Off From Input Data
Dec 6, 2013I am trying to find the exponential equation from a set of data in excel. The problem is that the graph does not follow the scatter plotted points on the graph. How would you remedy this?
View 1 Replies View RelatedPivot Multiple Graph And Trend Line
Apr 11, 2007I got a pivot table with following details Row Values: Dept_Code, Super_group, Product_Group Column Values: Ending_Date
Data: Sales, Availability%, Waste%, Number of Stores
i need to have a bar chart with trend line individually on each data items e.g.Sales, Availability% etc. when i tried to use trend line it prompts me to enter series i.e Ending_Date and it draws trend line for only that period comparing all data values. is there any way to have individual graph for Sales, Availability%, Waste%, Number of Stores with trend line covering
Stacked Bar & Line Graph
Sep 20, 2006how to create a stacked bar & line graph together.
I know by default, I can choose to have a stacked bar, OR a line graph, OR a basic bar & line graph.
But I need to take a step further and have a stacked bar WITH a line graph.
options in which I could combine the above graphs?
Stacked Bar Graph With Average Line
Mar 24, 2009We are trying to create a stacked bar graph with an average line. Each time we try to add in the average data to the graph it adds it to the stacked bar. The stacked bar should represent the inpatient & outpatient cases at a hospital for the current year (months showing across the as columns). The line should represent the previous 2-yr average total. Anyone have an idea how to add a line to the stacked bar graph? It has us stumped.
View 3 Replies View RelatedStacked Column & Line In Same Graph
May 28, 2007I would like to make a graph in Excel, where I present both a stacked column and a line with two different axes. Including a clustered column and a line in the same graph with two different axes is easy, as this combination can be found in the custom types selection in the chart wizard. However, there is no such alternative as a stacked column and a line with two different axes. Is combining the two manually possible?
View 2 Replies View RelatedX Axis Chart Range Stacked Line To 100%
Aug 14, 2014I am plotting a line chart wherein the X-axis is based on % and Y-axis is based on $. I have 5 scenarios wherein they have different ranges. I want to have the X-axis plotted up to 100%. How to get the X-axis stacked at 100%. See attached file.
View 1 Replies View RelatedStacked Column Chart With Rate Line
Nov 9, 2006Here's a sample of a chart that I want; However, I want the bar chart to be a stack chart as I have multiple "Failure modes" per month that I want to show the number(or count) of failures per month. Then I want the line chart to remain the Complaint Rate for that month.
I just can't seem to figure it out.
This chart pulls from a data set that looks something like this: ....
Stacked Column With Average Line On Secondary Axis?
Apr 30, 2014I have a stacked column chart that I need to show an average on, that is on a second axis and shown as a line rather than a column.
I have tried moving it to a secondary axis but then it keeps changing the graph to show only the average.
this is just one of about 25 graphs I am having to do like this.
stacked 2 axis.xlsx
Clustered And Stacked Charts Including Line Graphs
Mar 15, 2012I need to show a chart with new and return visits 2 years side by side. I also need to show a budget line and 2 seperate utilization lines. How to show this.
View 1 Replies View RelatedOverlay Line Chart On Top Of Stacked Column Chart?
Feb 15, 2012I am trying to overlay a line chart on top of a stacked column chart. The stacked column chart is a chart where the x axis is dates and the y axis is amount. The line chart is a projected amount that I will reach in few years; the x axis is the date while the y axis is an amount. I can get a chart that has a line and stacked columns, but ever time, the dates get messed up. The line has an extremely wide date range while the columns only have about a month of data.
View 9 Replies View RelatedHow To Calculate Trend Line Growth Rate (as Annual Percentage Growth Rate)
Feb 13, 2014From a chart in Excel I need to automatically calculate what the annual percentage growth rate is of a trend line. How to automate this in Excel? I've attached a sample so you can see what I'm trying to accomplish.
View 6 Replies View RelatedHow To Create Venn Diagram
Aug 6, 2014How can I create a Venn Diagram in excel, or the closest thing to it. I would like all similar countries in the middle (where two circles overlap), then the differences on the outside with the country names. See my attached list.
MSCI vs. FTSE Emerging Market Countires.xlsx
Button Set-up To Delete A Diagram
Jan 21, 2010-- > I have a single button set-up to delete a diagram
-- > The diagram is made up of 7 parts
-- > If all 7 parts are present the button will work perfectly as is.
-- > If one or more parts are missing I get an error.
-- > I tried doing some error traps but it's not working like I know it should (code below).
--> The button assigned to this macro is "Clear Defualt..."
Scatter Diagram With Dates
Apr 29, 2006I'm not sure if this is possible or not, but I've exhausted all possibilities. I have a table (see attachment) that has due dates, and person assigned to it. What I am looking for is a way to plot out dots on a scatter diagram, a different color for each assigned person, versus the dates in order to tell when a certain date is busier than another. I can't seem to get Excel to want to do this, as I am unsure what to put on each axis.
View 3 Replies View RelatedXY-plot Diagram (text Values On X-axis)
Dec 4, 2012I am having a problem when making a XY-plot diagram because I want text values on the x-axis instead of numbers - but that doesn't seem to be possible to get with this type of diagram?
View 2 Replies View RelatedLimit The Number Of Times Shown In A Diagram
Jun 4, 2008I'm making a line diagram, showing how a value changes over time. My data is measured every 30 min, which results in a mess when it's plotted over a month.
How do I limit the number of times shown on the x-axis, for instance so that only the date (every 24 hours) is shown?
Edit Checking Before Inserting A New Diagram For Multiple Components
Jan 22, 2010- I have some buttons set-up to insert pre-set diagrams from sheet “FISH PARTS” onto sheet “THE JUMPER FISHBONE”
- However, before inserting a new diagram onto sheet “THE JUMPER FISHBONE” I need to make sure the default diagram components are all gone.
- There are seven components all with structure Like “BONE_*”
- If one or more of these components are present I want to display a message to confirm the user wishes to delete the default diagram and insert new chart (or abort is they do not wish to delete the default)
- some explaination of structure below
- spreadsheet also attached
Excel 2010 :: Sensitivity Analyses - Dispersion Diagram / Chart
Dec 12, 2012How to create a dispersion diagram which will show me the impact of 3 variables on oil-in-place, which for the sake of this description, I shall call 'X'.
The 3 variables (let's call them A, B and C as I needn't go into the details) are used in the calculation for X. I have created tornado diagrams, which show me the positive and negative impact of each variable. But I'd like to create a diagram with X along the x-axis, with X increasing, and on the y-axis, have -1 to +1 which represents the impact of the variables A, B and C on X. So, as X increases, variable A might also increase toward +1, which would show me that as variable A increases, so does X. The reason why I'd like to learn how to do this is, whilst a tornado diagram will show me the impact of each variable on X, a dispersion diagram will also show be trends between variables. So, for example, variables B and C might both increase along the same trend, which would show me two things: that they both positively impact X and that one variable is dependent on the other.
I remember from a few years ago that an old version of Excel had a data sensitivity tool which did something like this. I'm working off of Excel 2010 now, and I've had a little look at the 'whatif' functions, but that doesn't seem to be what I'm looking for. Also, I would kind of like to see how to do this myself with the raw data, instead of the behind-the-scenes stuff.
How To Make A Functional Venn Diagram Bulls Eye Chart For Accuracy
Dec 30, 2013we all have a team, and we are scored on calls, appointments, demos, proposals, and revenue. Rather than asking us to do one or all of these metrics, I would like to have a bulls eye chart that could show people their bonus eligability, so if for example 50% of the circles are touching the bulls eye circle, you would be able to adjust what you need to work on for bonus.
Here is a sample graph.
sample structure.jpg
Here is sample data I am trying to work withsampledata2.xlsx
TREND Between Two Points
Jan 6, 2009I have two columns where TREND does not work well. I want to calculate the TREND value of Column 2 (PERCENTILE RANK) based on a new RAW number. If I TREND between just the two rows, the value is fine (i.e. If I TREND between 105 and 110 RAW, I get the right PERCENTILE RANK if the new X value is 106 (which is 15.3% PERCENTILE RANK). How can I make a formula that will only look at the two rows and TREND just those two rows to give me the right PERCENTILE RANK.
RAW PERCENTILE RANK
10514
11020.4
11121.8
11729.5
11833
12342.5
12444.5
12954.4...........