Formula Won't Calculate When Only Some Of The Three Variables Are Input
Jul 27, 2009
In column H: =IF(ISERROR(L4-J4-K4),"",IF(OR(K4="0", K4=""), L4-J4, L4-J4-K4))
So, if formula is going to come up with an error, I don't need to know. If it's not an error: L - J - K. Except that sometimes there isn't information in J or K, and the formula won't calcluate L - 0 - 0, unless I physically enter in zeros.
=IF(ISERROR(L4-J4-K4),"",IF(K4=""), L4-J4, L4-J4-K4))
and
=IF(ISERROR(L4-J4-K4),"", L4-J4-K4))
I don't want the people using this to have to enter in a plethora of zeros in order to force the calculation. What am I doing wrong? I've attached workbook with the relevant information in it. You can see in the middle that if there is nothing entered, it won't work right.
View 5 Replies
ADVERTISEMENT
May 24, 2014
How can Excel input automatically the "total price" in the first table after I enter "type", "width" and "height" and looking up the other reference tables (below). The referenced tables will have fixed width and height but in the input table will be entered any number within the minimum and maximum range. So the idea is to get the price of the closest highest combination of "width" and "height" on the referenced tables and apply the price:
Input table (I will input "type" by drop down menu, and width and height)
type
width
height
total price
[Code].....
View 6 Replies
View Related
May 15, 2014
On the attached sheet in column X, I am trying to input the Allocation percentage dependent on a number of variables:
Type (Bar, Blank, Coil, Sheet, Special)
Sub Fam Code (2A02, BC02-05, BC99, BZ99)
Sup Category (Arcelor, Independent, Tata/ Corus)
The allocation percentage is based on the below; anything outside of this should result in "Other".
Sheet (BC02/03/04) A=40%, T=40% & I=20%
Coil (BC02 & BC03) A=40%, T=40% & I=20%
Coil (BC04) A=30%, T=50% & I=20%
Example 1:
Type - Sheet & Coil
Sup Category - Independent
Result 20%
Example 2:
Type - Coil
Sup Category - Tata/ Corus
Sub Fam Code - BC04
Result 50%
Example 3:
Type - Coil
Sup Category - Arcelor
Sub Fam Code - BC04
Result 30%
View 1 Replies
View Related
Oct 7, 2013
I have a dataset that will be updated frequently and dumped into cells A1:D### that would look like:
ID Week Sales Rate
1 1 $200 3 0.5
1 2 $200 3 0.3
1 3 $200 3 0.2
1 4 $200 3 0.5
...
The formula i'd like to calculate in Column E Variable = "Forecast" Formula =IF(B2
View 2 Replies
View Related
Mar 20, 2008
For what I'd like to do, the attached workbook actually represents 3 worksheet. one input sheet and two output sheets (output1 and output2)
I plan to use command button " CommandButton1" on input sheet to start the calculations
Here's what I want to do after pressing the " CommandButton1" :
1. start with case 1 and find the value of Input A to Input J from input table using Vlookup and paste those values to respective palceholder for inputs in blue colour area above the input table for each input.
2.for empty cell in the input table paste 0 (zero)
3. after this will give results for case 1 inputs on sheets "output1" and "output2" on basis of formulas used for each output
4.then copy the results for case 1 inputs from sheet "output1" and "output2" and paste them on "input sheet " in Output table (its below Input Table) next to case1
5.Do this for all cases (in actual workbook there will be more than 100 cases)
View 9 Replies
View Related
Jun 26, 2014
I am looking for a syntax to ask a question with three variables
As an example
If
Blade size = 114 (only 3 blade size choices)
and
the Panel Size is between 500 and 700 ( This will also be dependant on the blade size)
and
the tilt bar is clearview (Three choices)
then
the result will be x = 182
The answers will depend on the above variables: 154, 159, 179, 177, 182 and 202
Screenshot 2014-06-26 14.21.41.png
Screenshot 2014-06-26 14.23.53.png
Screenshot 2014-06-26 14.26.11.png
View 3 Replies
View Related
Jun 3, 2009
I'm working on a time series dataset with a time step of 15 minutes. I need to calculate daily average of the several variables. So let column "A" be the "date-time" column, let column "B" be the "variable column" and column "C" be the "average column", I need a function that calculated in C1 cell the average of B1 to B95 cells, in C2 cell the average of B96 to B190 cells, in C3 cell the average of B191 to B285 etc.
View 3 Replies
View Related
Sep 30, 2009
In the file I have attached, I need to work out how to give the final total (cell G27) inclusive of VAT, dependent on the value assigned in cells K17-K26, which are explained in the list starting cell B29.
At the moment the value given is net of VAT, and I need the total figure in G27 to recognise that the first item needs to be at 15%, the second at 5% and the 3rd at 0%.
View 13 Replies
View Related
Apr 24, 2006
I have a spreadsheet with a real-time data link in cell A1 and I use Worksheet Calculate() to paste the new value, on any update,below cell A1. Once I have 10 values from A2 down to A11, I over-write the first one, so that I have the 10 most recent. From this I calculate the moving average.
Anyway, I would like to be able to do this without the pasting bit ie storing the most recent ten data points in a variable say x(i) and just averaging x(1) to x(10).
I'm guessing I need to use some kind of static variable or array, but I don't really know how to do this.
View 9 Replies
View Related
Jul 24, 2014
I am trying to create a macro which gives me an input box. I need to enter 2 numbers into the input box. It would be as follows:
Input Box Msg 1 - "What is your labor cost?" (NUM1)
Input Box Msg 2 - "What is your productivity rate?" (NUM2)
Then I need the macro to take this info and enter it into a formula which changes according to the row which you are on. (I need the macro to work based on which ever cell I currently have selected). The formula would be this if I currently had a cell on row 10 selected:
=(NUM1*(NUM2*$H10))/$H10
So, if I currently had cell L10 selected, and I ran the macro and put 100 in for "NUM1" and 10 for "NUM2" and my sheet had 20 in cell H10, then the macro would enter the number 1,000 into cell L10. If I had L500 selected, then the macro would enter the final number into cell L500 based on what value H500 contained.
View 9 Replies
View Related
Aug 6, 2008
Is is possible to create a calc for simple data input and assign this to cell U31 so that everytime user selects this cell then the calc pops up.
I didnt want to use an add-in in case other users don't have this add in on their computer.
View 9 Replies
View Related
Sep 29, 2011
I want to have formula with: ActiveCell:formula = I want to sum columns in a row having a column variable called: col The col variable will be the far right column and the other colunm in Row 2 will be col-3. What is the syntax to create this formula? If col = 5, formula normally would be :sum(b2:c5), I want to use col as the varialbe.
View 3 Replies
View Related
Apr 23, 2009
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
View 3 Replies
View Related
Jan 28, 2009
If a value fallw within these ranges, then the next cell should calculate the answer according to the percentages outlined.
for exmaple:
If somethng costs 250.00 then the next cell should display - 250 x .50 and the answer would be 375.00
1-500 = 50%
501-1500 = 45%
1501 - 1600 = 40%
1601 - 2500 = 35%
2501+ = 30%
and automatically calculate the answer.
I know there's an IF formula, but I can't seem to figure out how to do multiple IF's ~
View 5 Replies
View Related
Oct 24, 2013
Just got a problem with auto-populating cells with a formula that is made up of variables. My formula references the cells on another sheet, but this will be dynamic.
I'm trying to get the formula to reference e.g. cell A1 in the Calls Taken sheet, with the column held in the srtshortname variable and the row held in the formularow variable.
Code:
set rng = range(cells(introwdate, formulacol), cells(introwdate, formulacol))
rng.formula = "='Calls Taken'!" & strshortname & "" & formularow & ""
View 2 Replies
View Related
Nov 25, 2013
Writing a formula for the info below. Here is what I need basically. If B2>2, then I need it to count all central and field, STK and NSTK in column D.
location
days
stock type
Central
3
nstk
field
1
stk
[Code] ...........
View 9 Replies
View Related
Dec 3, 2007
I think I'm using the correct terminology with the term "variable", but to explain what I'm trying to do, I want to get RAND() to hold the first returned variable so I can compare it to other places RAND() has been used & if the returned value is the same as the other place, then run RAND() again.
Here is my basic formula (where $B$2 is 50):
=IF(ROUND(RAND()*$B$2, 0)+1=A4, ROUND(RAND()*$B$2, 0)+1, ROUND(RAND()*$B$2, 0)+1)
I'm trying to say in the formula above that if rand = what was already in A4 then run random again -- but this doesn't keep if from returning the same value as A4 on the second pass.
What would work is something like (where X is the assigned variable):
=IF(X=ROUND(RAND()*$B$2, 0)+1=A4, ROUND(RAND()*$B$2, 0)+1, X)
But it doesn't appear you can use X in a formula (only in a macro which I don't want to use) --
View 9 Replies
View Related
May 11, 2014
Is it possible to find the formula of a result that is based on three other values.
Here's my example:
I give three cases, but I am sure all three use the same formula. I made the team names up but the values are 'real'.
MATCHES
TEAM NAME
TEAM RATING
OPP. RATING
POINTS DIFF.
NEW RATING
Match1
Blumps
-2.62
5.05
8
-1.28
Match2
Champs
2.8
4.08
-18
2.37
Match3
Sharps
8.26
-3.53
-16
3.68
I want to know what formula was used to calculate the New Rating in the last column. I am not 100% sure if the formula to calculate the New Ratings as shown above includes a value for home ground advantage of which I might be unaware. For what its worth, the Blumps and Sharps were home teams and the Champs was a visiting team for the three matches shown.
View 1 Replies
View Related
Dec 3, 2003
correctly using variables within functions used in formulas specified by VBA. Here's an example:
I want to place a formula within a workbook file called "Books 2003.xls" that goes to the version of the file for the previous year (or whatever year is specified) and does a Sum of a particular range (where that range is also specified as a variable) so it sums up the Total for the previous year for the same number of months that have data in them to date for the current year. Once VBA places the formula where it belongs, it should be able to always provide a running comparisson with the current year to date total and the totals for the same period for the previous year. Here's an example of the intent of this simple formula:
ActiveCell.FormulaR1C1 = "=SUM('[Books 2002.xls]Income Summary'!R4C2:R8C2)"
The workbook files will all be named the same way: Books 2002.xls, Books 2003.xls etc.... The range to be summed will always start at R4C2, but could then end anywhere from R4C2 (same as B4) up to R15C2 (same as B15).
I already have a routine that captures the value for the variable CurrentYear in the form "2003" and thus have another variable for PrevYear (= CurrentYear -1), and so then have a way to correctly specify the variable "BookName" to get the correct filename needed. I also have a variable for the CurrentMonth in the form of "1 through 12", and can use that to specifiy the correct RowNum needed to determine the end of the range (RowNum = CurrentMonth + 3).
I've tried to substitute the variables "BookName" and "RowNum" into the above formula with various combinations such as what follows, but I'm not getting the correct syntax with the right number of quotes etc...:
ActiveCell.FormulaR1C1 = ""=SUM('[" & BookName & "]Income Summary'!R4C2:R" & RowNum & "C2)""
This doesn't work, and I'd love to learn the correct rules for syntax when inserting variables into situations like this.
View 4 Replies
View Related
Dec 19, 2013
I have a spread sheet that has various references
on the same sheet
on a different sheet ( in same workbook )
on a different sheet ( in a different workbook )
If I click on a example cell it might say
Code:
=5*C4*$D$1-Sheet1!C9
Is there a way for excel to be able to iterate through these separate variables ? and know if the reference is on the same sheet ?
Say I wanted to evaluate the references on other sheets ( replacing the link with the value )
So if Sheet1!C9 contained the value 10 the formula would be replaced with
Code:
=5*C4*$D$1-10
View 2 Replies
View Related
May 12, 2014
I can't quite get this formula to give me the correct value.
imgur: the simple image sharer
I tried defining as a Range and I can't get it to work right either way. When I hover over my r1 and r2 values the range is correct but it does have "$A$227:$A$447" quotes around the range so I think that is messing me up.
View 4 Replies
View Related
Dec 1, 2006
I have written some VBA code that is functional, but yields a formula that is somewhat confusing to the user.
I have two string variables called TippityTop and Anchor, both of which refer to specific cell addresses in the R1C1 style.
I attempted to define other variables that reference cells that are offset from TippityTop and Anchor without using the ActiveCell route. Try as I might, I could not produce the cell addresses that I wanted these new variables to reference.
I consulted many Excel Help screens and referred to a book on Excel VBA, but I finally took another route.
I now have:
ActiveCell.FormulaR1C1 = _
"=IF(AND(ISNA(MATCH(RC[-2],OFFSET(" & TippityTop & ",1,-2):OFFSET(" & Anchor & ",-2,-2),0)>0),ROUND(RC[-1],2)0),""DOV not in Treasury"","""")"
The problem is that this code yields this formula in Excel:
=IF(AND(ISNA(MATCH(L587,OFFSET($H$585,1,-2):OFFSET($H$798,-2,-2),0)>0),ROUND(M587,2)0),"DOV not in Treasury","")
Rather than OFFSET($H$585,1,-2):OFFSET($H$798,-2,-2), I would like the formula to say F586:F796, so that the end user can easily understand the logic.
View 9 Replies
View Related
Jan 15, 2009
I want to assign a cell a formula that changes base on variable, example
myVar=3
Cell(1,1).value = "=average(1:{myVar})"
what do i do to make this work instead of {myVar}?
View 9 Replies
View Related
Sep 4, 2007
I am using follwoing vb code to enter formula to sum a range. However it is giving sum of different range.
Cells(Row, Column).FormulaR1C1 = "=SUM(R[" & a & "]C[" & b & "]:R[" & x & "]C[" & y & "])"
Where a, b , x and y are variables containg starting row, starting column, last row and last column value like a=19; b=3; x=24 and y=3. When i check the formula in that cell, it appears as Sum(F25:F30)
View 3 Replies
View Related
May 14, 2008
I am creating a worksheet and I have a formlua where the value is text. I can make it work standing alone but not with other variables. =IF(E11=S1,0)+(IF(E12=S1,0)+(IF(E13=S1,0.0025))+IF(E14=S1,"Call for Prciing"))
View 2 Replies
View Related
May 14, 2008
i'm having trouble formating a cell to accept either user input or a equation i've made. i would like it to accept the user input and when there is no input to use the equation i have.
View 8 Replies
View Related
May 5, 2014
Basically I need a formula that takes into effect many variables. It needs to check a size, thickness, and material, to determine a cost...
1.5 O.D. - 16GA - 304SS = $X
but
1.5 O.D. - 18 GA - 304SS = $Y
and such.
The problem I have is not only am I not understanding a lot of Excel jargon, the data set is not in perfect "example" conditions.
O.D. is in N:N yet there are blanks between N(x) and N(y), GA is in O:O yet blanks between O(a) and O(b), and so on.
Here is what I have at the moment, it uses a second sheet to derive the cost based on the parameters. Please ignore the first few terms, they are used with this cost lookup to give me my final. There also may be incorrect syntax in this, but since I get a nesting error first, I really don't know.
=V7+(Q7*M7*(IF(N7=2=AND(O7=20)=AND(L7=304),’Steel Tube Cost WIP’!$DD$19,IF(N7=2=AND(O7=20)=AND(L7=316),’SteelTubeCostWIP’!$DD$20,IF(N7=2=AND(O7=20)=AND(L7=2205),
’SteelTubeCostWIP’!$DD$21,IF(N7=2=AND(O7=18)=AND(L7=304),’Steel Tube Cost WIP’!$DD$16,IF(N7=2=AND(O7=18)=AND(L7=316),’SteelTubeCostWIP’!$DD$17,IF(N7=2=AND(O7=18)=AND(L7=2205),
’SteelTubeCostWIP’!$DD$18,IF(N7=2=AND(O7=16)=AND(L7=304),’Steel Tube Cost
[Code] ......
Mentioning LOOKUP, can I even use it? I've attempted many times however it isn't going too well What can I do?
View 2 Replies
View Related
Dec 19, 2012
I've tried this in formulas (if, if/and, if/vlookup, if/vlookup/and) and I've been trying to write a macro for this (which I'm thinking needs to loop).
Problem: I have a report that is broken into three categories.
Column A includes locations, Column B includes vendors. Across the top, the monthly report is broken into four classifications (trans types), which are then further subdivided by quantity and cost. (Rough estimation is provided below)
Locations
Vendor
Z53
Z50
Z51
Z52
[code]....
My data comes in sorted by location, and subtotaled by vendor and trans type. So I'll have a row of data that includes:
Location 1, Vendor A, Z51, $200, 2
Location 1, Vendor A, Z53, $150, 2
Location 1, Vendor B, Z53, $150, 1
...
What I need to do is pull the data for Z53 based on Location & Vendor. So from the data is would read Location 1 & Vendor A and then find them on the report and paste into the appropriate row (in my report Z53 qty is col E and $ is col F).
I was trying to do a macro that within a determined range (finding the first and last instance of Z53) would match location and vendor to the monthly report and paste the values of Qty and $ into the appropriate fields. Below is what I managed to mangle:
Code:
Dim Holder1 As Range
Dim Holder2 As Range
Dim Holder3 As Range
Dim Holder4 As Range
Dim Found As Range
Dim y As Range
Dim x As Range
Dim Z0 As Range
[code]......
I was originally trying to match from the report to the data and then copy back to the report, but I had the idea of instead taking the location and vendor from the data and finding the match on the report and pasting. That way I wouldn't have to worry about errors (unless a new location was added that was not included on the report - which I think is an easier fix than trying to go the other way, but maybe not).
View 9 Replies
View Related
Jun 6, 2007
I have three variables; Independent variables x & y, and dependent variable z. x & y can take the values 1,2,3 and can equal each other z can also take on values 1,2,3 but can never equal x or y. I tried using if/and statements to solve this (see below), but I would have to do it for each case and it exceeds Excels embedded function limit.
=If(and(B7=1,B10=1),riskduniform(E4:E5),if(and(B7=1,B10=2),3,if(and(B7=1,B10=3),2,if(and(B7=2,B10=2),riskduniform(1,3),if(and(B7=2,B10=1),3,if(and(B7=2,B10=1),3,if(and(B7=3,B10=3),riskduniform(1,2),if(and(B7=3,B10=1),2,if(and(B7=3,B10=2),1)))))))))
View 3 Replies
View Related
Jun 20, 2008
I want the range in the VLOOKUP below to display its actual value - ie "'6 June 08'!$A:$C" in the formula rather than the actual variable name 'strResult'.
Sub PreviousCount()
strDate = "6 June 08"
strColumnRange = "$A:$C"
strResult = "='" & strDate & "'!" & strColumnRange
Dim i As Long
i = Range("A2"). CurrentRegion.Rows.Count
Range("D2:D" & i).FormulaR1C1 = "=IF(RC[-3]="""", ""Column A blank!"", IF(ISNA(VLOOKUP(RC[-3],strResult,3,0)), ""NEW INSTALL"", VLOOKUP(RC[-3],strResult,3,0)))"
End Sub
View 4 Replies
View Related
