Copy Input Data To Output Table Based On Variables

Mar 20, 2008

For what I'd like to do, the attached workbook actually represents 3 worksheet. one input sheet and two output sheets (output1 and output2)

I plan to use command button " CommandButton1" on input sheet to start the calculations

Here's what I want to do after pressing the " CommandButton1" :

1. start with case 1 and find the value of Input A to Input J from input table using Vlookup and paste those values to respective palceholder for inputs in blue colour area above the input table for each input.

2.for empty cell in the input table paste 0 (zero)

3. after this will give results for case 1 inputs on sheets "output1" and "output2" on basis of formulas used for each output

4.then copy the results for case 1 inputs from sheet "output1" and "output2" and paste them on "input sheet " in Output table (its below Input Table) next to case1

5.Do this for all cases (in actual workbook there will be more than 100 cases)

View 9 Replies


ADVERTISEMENT

Index - Match Function To Output Data Based On User Input

Apr 30, 2009

I have a list of data that I'm using the index - match function to output data based on user input.

For example, I have:

1 10
2 15
3 20

So when '1' is selected another cell outputs '10'.

However what I want is for example if 1.25 is input, I want it to interpolate to spit out the correct number between 10 and 15.

View 5 Replies View Related

Web Based Input Output

Feb 14, 2007

I got a question where I cannot think of a good descriptive title for, I have seen this done but do not know how it is done. An internet user inputs data onto a web form, and and presses a submit button. The submitted input is 'processed' on a through excel and outputs the result back the internet user.

Two questions
1 - what is a good title for this?
2 - how is it done?

View 3 Replies View Related

Input Table -> Output Table

Sep 1, 2009

It would take forever to describe the problem so I just made a sample Excel file.

View 2 Replies View Related

Code To Generate Data Table Based On Variables

Aug 26, 2008

I was trying to use the VBA code to generate a data table:

Private Sub createDataTable(WS As Worksheet, initialRow As Integer, numCol As Integer, numRows As Integer)
Dim initialCell As Range 'specify the upper left cell
Dim RefCell As Range 'the reference cell on the caculator sheet

'activate source sheet
ActiveWorkbook.Sheets("Calculator").Activate
Set RefCell = ActiveSheet.Cells(2, 3)
WS.Activate
Set initialCell = ActiveSheet.Cells(initialRow, 1)
initialCell.offset(numRows, numCol).Select
Selection.Table ColumnInput:=RefCell
'the calculation should be automatic, if not, then calculate
WS.Calculate
End Sub

and it kept giving me an input celll not valid error on this line: Selection.Table ColumnInput:=RefCell the thing is, I have defined RefCell as a range object, so it should be OK rite?

View 4 Replies View Related

Logical Formula With Output Based On The Text Input

Dec 2, 2009

Sometime itís so hard to explain what it is you are having problems with, specially in the little title. I'm trying to write a formula which should be very simple but isnít . The formula is in box F10 if B10 has anything in it and its going to have a mixture of text and numbers (first text then numbers) then itís should equal to the value in the box C7. Here is the formula I wrote that doesnít work.

View 4 Replies View Related

Automate Calculation Of Output Based On User Input

Nov 2, 2009

What I am trying to do is get the ROW 13 and ROW 18 outputs depending on inputs in ROW 2 to 5. Inputs in ROW 2 to 5 can have any value in any year. I would like to perform the calculations if the value in column U is 2 (if 1 then no action required)

I don't need ROW 10, 11, 12 separately if that is easier ...I am interested in getting the ROW 13 basically.

View 6 Replies View Related

Copy Paste Specific Row Of Data Based On User Input?

Apr 14, 2014

I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.

the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.

View 11 Replies View Related

Output Based On Lookup Table

Dec 1, 2007

I created a Vlookup table so that when you type a ticker into Cell B3, it tells the user how many points and what percentage of the criteria the stock passes. I would like to create a macro (or something) that takes each ticker in the Ticker sheet, enters it in the Cell B3, and then transfers the data that the vlookup table produces to the output sheet. My attachment is a simplified version of the real spreadsheet.

I hope this isn't a duplicate question. I did look, but maybe I'm not phrasing it correctly. A reference to a similar problem works too.

View 3 Replies View Related

Automatically Copy/Paste Data From Input Range Based On Criteria

Sep 4, 2006

I have a workbook with 2 - worksheets "DATA" and "LETTER".

The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.

The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.

After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.

In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....

View 9 Replies View Related

Input Data Looking Up Other Tables - 3 Variables?

May 24, 2014

How can Excel input automatically the "total price" in the first table after I enter "type", "width" and "height" and looking up the other reference tables (below). The referenced tables will have fixed width and height but in the input table will be entered any number within the minimum and maximum range. So the idea is to get the price of the closest highest combination of "width" and "height" on the referenced tables and apply the price:

Input table (I will input "type" by drop down menu, and width and height)

type
width
height
total price

[Code].....

View 6 Replies View Related

Transferring Of Input From Input Cell To Output Cells?

Jun 8, 2014

I would like to know if it is possible to transfer values of cells this way?

I've attached the excel file for easier reference.

View 3 Replies View Related

Function Back Variables: Function Give Two Or More Output Variables

Jul 27, 2006

Can a Function give two or more output variables. e.g.

Sub a()
x = 5
result = Y(x)
End Sub

Function Y (x As Integer) As Integer
Dim B
B = ... * x
Y = ... * B

this will give back Y as a result. But if I want to get 2 or more output variables (let's say I need to get also B into sub) from one function, how should I do that?
I need this because function works with large matrix and I want to extract some values appeared in between.

View 2 Replies View Related

Copy Table Values To Array Variables And Use Them In Another Sheet?

Nov 20, 2012

I have a query about using Array Variables in excel VBA. I have a set of lookup tables and a main data table. The data table will be downloaded everyday. I need to replace the ID's in the main table with actual data from the Lookup tables.

e.g.
Main Data Table
Color Operator
005--325 005
004--326 004
003--327
001--328
002--322

Lookup Color
001 - Red
002 - Blue
003 - Green
004 - Violet
005 - White

Lookup Operator Table
323 - Operator 1
324 - Operator 2
325 - Operator 3
326 - Operator 4
327 - Operator 5
328 - Operator 6

I have a huge amount of data in the main table. So I can't use a lookup formula for automation. Rather I would like to use VBA to create array variables, scan and copy the lookup data into the array and replace the ID's in the main table.

Only that I am unable to achieve this using arrays. I am very basic in executing code related to Arrays.

View 2 Replies View Related

Copy Data Into Table Based On Sheet Name?

Jul 15, 2014

I have all games saved, each game into it's own sheet (tab), in a workbook. Game 1 is on Sheet1, game 2 is on Sheet2 etc etc

I also have a "Calculations" sheet that I wish to import each game into 1 at a time, and run a macro on it to run a stat tracker.

Is it possible to create a table, that I can type the sheet name "Sheet1" into a cell, it will have that table populate with all the info contained in "Sheet1"?

Here is an example of my spreadsheet

View 4 Replies View Related

Min / Max Formula Output Cells (Multi-Step Data Table)

Oct 28, 2013

I have a long chain of formulas calculating the return on a particular investment in equipment. We'll call the inputs A, B, and C, and the output (total savings generated) Z. There are several set combinations of values for A, B, and C that I'm interested in generating a summary report for.

There are a number of steps in-between the inputs that I'm interested in, all of which are necessary to get to the output, but is there a good way to have excel chart inputs and outputs without filling out the intervening data?

I suppose the whole thing is essentially a multi-variable, multi-step data table.

View 3 Replies View Related

Comparing Input Value From Set Of Values 1 And Output Data From Set Of Values 2

Sep 28, 2012

Got a road block on one of the trackers which I am trying to create which compares some of our agreements. Basically we need to compare current production with our contracts and then bring the tier level they are at in order to then calculate how much in overrides we receive. Belwo is an example:

Input Value = 140000
Out Should be = 1.5%

Set of Values 1
T1
T2
T3
T4

[Code]...

In a nut shell it will look for 14000 in set of values 1 and pick T3 to then go in set of values 2 and display corresponding T3 which will be 1.5% in above example as output.

View 2 Replies View Related

Copy Data Table Seperate Sheets Based On Column Criteria

May 12, 2008

I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.

View 9 Replies View Related

VBA Select Range To Copy Based On Two Variables

Jan 13, 2014

I have a Macro that already works great but now I need to look for another variable to sort it down even further. I think it can be done by setting up a "Case" but still not sure how to do that. It already looks through the range to find all the rows that return a value of "True". Now I need it sort those results so it only returns what has a specified value in Column "AJ". I am looking to do several choices (Listed Here). So the end result will be all the items that return "TRUE" In Column "AI" and are Items that return one of these values per Case "Starters, Appetizers, Soup, Salad, Entree, Dessert, Special" with then copy over in the exact format that is listed in the code below.

For example All the items that are selected with "TRUE" can be narrowed down to all of those that are "Salad" as well - Then copied over in the exact format that is listed in the code below.

What I am doing is breaking out all the different course of food and putting a Header in-between each (That is already built and working) - So I can select all the food from a master list and then put it in order on the "Catering BEO" Sheet with Headers in between

Code:
Sub BEOA4()
Application.ScreenUpdating = False
Dim wsSource As Worksheet
Dim wsDest As Worksheet
Dim FoundX As Range
Dim FirstFound As String
Dim lastrow As Long

[code]....

View 3 Replies View Related

Updating Value In Table Based On User Input

Feb 10, 2010

I have one sheet to act as a splash page for user input. The second sheet stores all relevant data. My goal is for the user to input a numerical value in a cell (or input box) and then click a submit button. The code for the macro should look at a cell on sheet 1 which displays the primary key of the row in the table on sheet

2. Based on that primary key, it should look to sheet 2 and then insert the value into the table in the correct row and column. The column headings are the days of the week, and the specific day the user is concerned with is also displayed on sheet 1.

Sheet 1:

A1 = Day of the week
A2 = Unique primary key
A3 = user input value

Sheet 2:
table
Rows=primary key (001 - 999)
Columns = days of the week (Monday - Friday)

example:
user inputs '5' on sheet 1 with 'Tuesday' and '007' selected in their respective cells. I would then like 5 to be copied to B7 (row 7 for 007 and column B for Tuesday).

View 2 Replies View Related

Two Variable Data Table - Both Variables In Rows?

Nov 29, 2013

I'm interested in creating a two variable data table with the two variables in the top two rows.

I'm aware that two variable data tables are usually done in an array with variables in the top row and leftmost column. However, as there are multiple outputs to the variations that I want to make it makes sense to have the variations in the two top rows.

View 8 Replies View Related

Solution/altenative To Data Table Using >2 Variables

Feb 9, 2010

Is there a way to test out a formula using Excel that has more than 2 variables? (If only 2 variables, I would use a simple data table). The formula I am testing has 50X50X20 variables (and as a subset, each variable has 2500 lines of assumptions!). I don't need to see all the results, only the result that produces the highest result. For simplicity (if someone has an answer) let's assume 3 variables are A1, A2 and A3. Formula is in A4 and formula is A1+A2+A3. Assuming A1 can be 1 to 5 and A2 same , A3 same, the long hand calc is for me to run a data table using variables in A1 and A2 the fixing A3 (as 1)..note maximum result....then run data table again using variables in A1 and A2 and changing fixed value in A3 to the number 2...and so on and so on....in this simple example I know the max result would be 15, but much more difficult in my spreadsheet test.

View 9 Replies View Related

Limiting Output Based On Cell Data?

Mar 22, 2013

I've got a worksheet that needs to be limited by the value in a cell. I've attached it so you can look at it and understand what I need better. In I7 (red box) is a number that is the max a machine can rotate. B6 should never exceed this and B9 should be scaled down to match the output of B6. I think B9 will scale down automatically from the existing formulas if B6 is throttled correctly.

Should =FLOOR((((F5*D11)/D9)*3.82),50) have a max value equal to I7? And how would I incorporate it?

View 1 Replies View Related

Offset The Input Or Output References

Jun 11, 2009

the actual output of the error message when I run my macro.
To repeat it, it says, "Regression - Having trouble offsetting input/output references"

The two button choices that appear on the bottom are "OK" or "Help." The OK button allows the macro to keep running (until it finds that it cannot find the regression output that was supposed to be created.

View 11 Replies View Related

Input/output Values Into/from An Array

Nov 6, 2009

I have a long list of values, a few thousand lines, that I need to input into an array so I can run a formula on the values in the array and then take those results and put them into another array which I can then call to output down a different column. Is there a faster way to accomplish this than the typical For Loop with the activecell.value and activecell.offset commands, that just takes forever.

View 15 Replies View Related

Multiple Output From Any Cell Input

Sep 18, 2006

Im working a spredsheet for my work, it is a database of qualifications for certain employees. There are about a hundred different qualifications and about 20 different employees. And some of the qualifications overlap. I would like to input a certain date in one of the cells, and have it copy into some of the other cells where the quals overlap. But i would like to input that date into any of the cells that overlap, not just one.

View 12 Replies View Related

VBA To Select Multiple Weeks In Pivot Table Based On User Input

Mar 26, 2014

Have been going round and round on this! I have a set of data that shows sales dollars by weeks. Currently, that data is in a Pivot table. I'd like to have a macro that selects the weeks (1-52) based on my input. For example. If I want to see weeks 5-52, I want to be able to input "5-52" somewhere and have a macro run that will select weeks 5-52 in the pivot table instead of having to go in and manually select each.

View 1 Replies View Related

Link Input To Auto Output In Next Cell

Apr 9, 2014

Is it possible to have a code of say numbers or letter assigned to an explanation of that said code which automatically appears in the next cell?

See attached spreadsheet : Auto fill next cell with predetermined answer from list.xls

View 2 Replies View Related

Input Of Names Repeat As Shown In The Output

Dec 15, 2008

i have uploaded a file.....basically i have an input of names and i want to repeat these as shown in the output..is this possible.

View 5 Replies View Related

Clear Output Box When Input Dropdown Box's Are Changed

Jun 7, 2013

I got all three dropdowns to be dependent on each other, now however, whenever I change the value in the top Input Dependent Box M39, I would like M43 & M47 to appear blank. I want these two cells to appear blank until you select the dropdown which will allow you to select your values of choice.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved