Hide Columns Based On Cell Content
Apr 3, 2008I'm sure this is an easy one, but I have never done this before. I need to know the best way to hide (for example) Columns U:W if cell U3 is blank.
View 9 Replies
ADVERTISEMENT
VBA To Hide Rows Based On Cell Content
Jun 23, 2006If I have data in range A1:Z99 I want to write a macro to hide all the rows that have a zero in the A column.
View 9 Replies View RelatedHide & Unhide Columns Based On A Cell Value
Feb 21, 2010worksheet I am working on at the moment, basically if row 5 has a 0 displayed I want that column to hide, but if row 5 has text of any value displayed I want it to unhide, the range is E5 to BA5 across.
I have draft VBA code as follows:
Auto Hide Columns Based On Cell Value
Mar 12, 2012I got an excel, with a "validation list" in a certain cell.
Users can select value1, value2 or value3. based on this value, some columns will have to unhide (standard= hidden)
(only for value2 this is the case).
I used the worksheet_change event to determin the value, but so far I'm only getting it to hide...
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If C24 = "value2" Then
Columns("H:O").Hidden = False
Else
Columns("H:O").Hidden = True
End If
End Sub
Hide And Unhide Columns Based On Cell Value
Mar 4, 2013I need to write a macro that will hide and unhide columns based on a cells value. I know how to write it to hide and unhide rows, but i can figure it out for columns.
For the rows I am using the following:
Sub HideRowsSavings()
Dim LR As Long, i As Long
Application.ScreenUpdating = False
With Sheets("Savings #4")
LR = .Range("A" & Rows.Count).End(xlUp).Row
[Code] ......
Hide Columns Based On A Cell Link
Nov 15, 2006I need to hide columns in a spreadsheet without using the hide/unhide columns option. I found an article which suggested setting up a combobox from the forms toolbar, this is populated by an input range and linked to a cell for a numeric value. The article although using a macro to hide rows suggested this code
Private Sub ComboBox1_Change()
If ComboBox1.Value = "A" Then
ActiveSheet.Range("1:3").EntireRow.Hidden = True
ActiveSheet.Range("4:6").EntireRow.Hidden = False
ElseIf ComboBox1.Value = "B" Then
ActiveSheet.Range("1:3").EntireRow.Hidden = False
ActiveSheet.Range("4:6").EntireRow.Hidden = True
End If
End Sub
I want to amend this code so that when the number in my linked cell changes the various columns are hidden.
For example if the cell link number = 1 hide columns e to az if the cell link number = 2 hide columns d and f to az etc.
I have had varying success with amending this code to entirecolumn.Hidden and changing the Combobox1. to dropdown1. but am unable to get it to work, I also stupidly deleted the code that was partially working and am now unable to remember what I'd done.
Hide/Unhide Columns Based On Cell Value
Sep 4, 2007I've attached one speadsheet :- "VBA.xls". The following conditions are to be done:-
1. When D2=1, Column "F","G" are visible & Column "I","J","L","M" are hidden.
2. When D2=2, Column "I","J" are visible & Column "F","G","L","M" are hidden.
3. When D2=3, Column "L","M" are visible & column "F","G","I","J" are hidden.
Hide Columns On Sheet2 Based On Cell On Sheet1?
Jan 25, 2010This is what I would like to do if possible: If E9 on Sheet1 is 1, then hide columns F-L on Sheet2.
View 4 Replies View RelatedHide / Unhide Columns Macro Based On Cell Value?
Dec 7, 2011I want to hide and unhide columns based on a cell's value.
If D6 of the ‘Summary’ Worksheet Is <> to ‘Test1’ and <> ‘Test2’
THEN Hide columns D:K of the ‘Charts – Source Data’ Worksheet
OTHERWISE Unhide columns D:K
Hide And Unhide Columns Based On Cell Value From Lookup
Dec 4, 2013I am trying to hide/unhide columns based on what is return to cell C2 from this lookup (=VLOOKUP(B2,GM!E2:M129,9,FALSE)). It can only return 3,6 or 9
If it returns 3 I want to hide columns I:P
If it returns 12 I want to hide columns E:L
If it returns 6 I want to hide E:H and M:P
I have been trying to work with this code which I found on this forum but I haven't been able to get it working fully. It only works when C2 is entered rather than calculated and I can't get it working for the M:P part of the third option.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Changed As Range
Set Changed = Range("C2")
If Not Intersect(Target, Changed) Is Nothing Then
Range("A:Z").EntireColumn.Hidden = False
[Code]...
Hide/unhide Number Of Columns Based On Cell Value
Jul 17, 2007If I have a value in A1 and run a macro [button], I want to have it hide a number of rows.
Each number is one column.
eg if A1 = 2 then B:C are visible, D:IV Hidden
if A1 = 3 then B:D are visible, E:IV Hidden
if A1 = 4 then B:E are visible, F:IV Hidden
up to 200 columns.
I tried it as a select case, but it is limited to just 22 cases which obviously not enough.
Hide Columns In Sheet Based On Value In Double Clicked Cell
Jun 4, 2014I have a workbook with two sheets, Project Overview and Projects Detailed. In Project Overview column K is different project numbers and what i need the code to do is when this number is pressed it has to go to Projects Detailed and search for this number in column AV and hide the lines that does not correspond with the number that has been double clicked.
In project overview you should only be able to press the numbers from row 9 and down and in Projects Detailed the numbers in column AV also starts in row 9. Some of the cells in column AV are empty and these should also be hidden.
Hide Unwanted Columns & Clear Ranges Based On Cell Value
Sep 17, 2008I have written a VBA procedure which is supposed to hide unneeded columns (based on the a number entered in a certain cell. This is working so far. Since I need to sum only the visible cells in a row i need to clear the contents of a range of cells if they will be hidden. Unfortunately the code i have written runs only to the ClearContents and then starts over from the beginning. If i take out the .clearcontents and put .Select for example instead, the code runs perfectly.
Here is the
Sub worksheet_calculate() 'Hide columns that are not needed
Sheet1. Unprotect
Application. ScreenUpdating = False
Dim i As Integer
Dim r As Integer
Dim s As Integer
Dim rngRange As Range
i = 2
Automatically Hide/Unhide Columns Based On Cell Text
Jan 10, 2009Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 13 Then Exit Sub
If InStr(Target.Value, "Other (specify in next column)") Then
Columns("N").Hidden = False
ElseIf WorksheetFunction. CountIf(Columns("M"), "Other (specify in next column)") = 0 Then
Columns("N").Hidden = True
End If
End Sub
but I have a lot of columns that I need to perform as above and I have put the code together as below
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Resume Next
If Target.Column = 13 And InStr(Target.Value, "Other (specify in next column)") Then
Columns("N").Hidden = False
ElseIf WorksheetFunction.CountIf(Columns("M"), "Other (specify in next column)") = 0 Then.................
Using the above code, when I selected more than one cell anywhere in my workbook and pressed delete I was bugging out with a runtime error 13 message. You can see from the above code that I inserted "On Error Resume Next" - this got rid of the runtime error 13 message, but now when I select more than one cell and press delete, hidden columns are incorrectly revealed in my worksheet. how I can extend the working code at the top of this posting so that it works for a number of different columns in my Worksheet i.e. without the runtime error 13 occurring and without columns being incorrectly revealed.
Change Content Of One Cell Based On Content Of Another
Apr 18, 2014Formula/macro/etc that would enable me to have content of a cell changed based on the content of another cell in the same row.
Example: cell in column D says "PSA" - so I would need the cell in column H for that same row to read "Radio"
I would need an entire sheet scanned to review for these occurrences and make the appropriate changes. I also would need the formula to be inclusive enough to scan for variations in column D cell content (PSA 1, PSA 2, etc).
Hide Columns Based On Date Value In Cell (Worksheet Change Event)
May 23, 2014Hide Columns based on Date value in cell (Worksheet Change event)Looking for a worksheet_change event macro that will automatically hide columns based on a value in cell S3. S3 is a data validation pick list of months based on the 1st day of each (e.g. 1/1/2014, 2/1/2014, 3/1/2014, etc.). I have date columns in row 6 from columns T through AQ. These values are 1/1/2014 (T6), 2/1/2104 (U6), 3/1/2014 (V6)....12/1/2015 (AQ6). I would like to hide columns that have a date in row 6 (T6:AQ6) that is LESS THAN (<) the date in S3 after the cell is value is changed.
View 2 Replies View RelatedHide Cell Content By Criteria
Aug 21, 2007is there a way to format a cell so that when i enter a time like 1 pm the pm does not show? this is for a schedule that will calculate the sum of hours employees have worked so i can't format the cell as text. also, i want to avoid military time (no 13:00).
View 9 Replies View RelatedHide Content Of Cell So It Appears Blank To User?
Jan 26, 2014I would like to hide the content of a cell so it appears blank to user. I edit excel bike tour (route) cue sheets for our bicycle club and some info is needed for formulas in calculating total distance but doesn't need to be seen by the bicycle rider.
View 5 Replies View RelatedTrying To Count Number Of Occurrences Based On Content Of Two Other Columns
Jan 30, 2014I am working on a spreadsheet that will provide count of types of complaints for particular areas over a running time span. I have tried a multitude of formulas but not sure how to write any of them correctly. What I am trying to do is generate a count of area type by whether it is formal or informal. (i.e. I want to know if there are x formal finish issues vs. y informal finish issues and so on.) This information will get charted and be kept "real-time" user input.
Type
Description
Concern
Formal
Informal
[Code] ....
How To Split The Content Of A Cell Into Separate Columns
Aug 12, 2014In A1 I show the following content: 5,12,27,36,124
How can I make this split to show the following layout:
A1: 5,12,27,36,124 B1:5 C1:12 D1:27 E1:36 F1:124
My worksheet has thousands of lines so hoping for a quick and easy formula that I can pull down and copy for the entire sheet?
How To Hide Rows Based On The Value Of Two Columns
Apr 11, 2009I need to filter out rows, based on a specific value in column A, (documents on file for the clients), then check column C (last name) and D (client first name), which can have the same client listed multiple times, based on how many different documents are on file ......
View 12 Replies View RelatedVBA To Hide Columns Based On Formula
Sep 28, 2011On my 'Report' worksheet in cells I1 to Z1 the formula returns "" if there's no data in that month or "1" to "18" depending on which month it is. e.g. if it's a 12 month accounting period then 6 of the columns will have no data in them and will have "" in row 1, the other columns will return 1 - 12 in row 1; if it's a 15 month accounting period then 3 of the columns will have no data in them and "" in row 1 and the other columns will return 1 - 15.
The VBA code below is part of a longer macro on my 'Data' worksheet. The rest of the code works fine and I just wanted to add this bit to hide the blank columns on the 'Report' page.
[VBA]
Private Sub Worksheet_Change(ByVal Target As Range)
Application.Calculate
With Sheets("Report")
Dim i As Integer
If Intersect(Target, Range("I1:Z1")) Is Nothing Then
Else
For i = 9 To 26
[Code] ........
Hide Columns Based On Cells Value?
Feb 24, 2012macro below that will only hide columns if all the rows (e.g. row 8 to 18) have no value?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("U18:AB18")) Is Nothing Then Exit Sub
If Target.Cells.Count > 1 Then Exit Sub
[Code].....
Hide Columns Based On Selection
Aug 30, 2008I have a worksheet that lists the months of the year on row 3 from columns C through N.
What I am trying to do is to be able to select the month I want from a drop down list or combobox and then hide the remaining columns based on the selection. For example if JAN is selected the months FEB through to DEC would be hidden.
Automatically Hide Columns Based On Dates?
Aug 4, 2013I am trying to automatically hide columns based on dates. I have a set of dates ranging from the beginning of August this year until the end of December 2019. I am trying to hide all columns that are at least a day ahead of the current date. Today on 8/4/13 it would show all columns up until today along with tomorrow 8/5/13.
8/1/2013
8/2/2013
8/3/2013
8/4/2013
8/5/2013
Code To Hide Columns Based On Value Of Another Column
Jul 31, 2014with a simple code that could:
If column K2:k466 is blank or says "No" then columns L & M are hidden. If it says "Yes" it is not hidden.
Also,
If Column N2:N466 is blank or says "No" then Columns O,P,Q,R are hidden. If it says "Yes" they are not hidden.
Finally,
If Column V2:V466 has a zip code (or number) then columns T,U,W,X,Y,Z,AA,AB,AC are present. If there is no value in any of V2:V466 then they are hidden. .
Hide Columns Based On A User Entry
Mar 28, 2009Is there a way of a user can add a number in a cell and this would hide a different amount of columns.
OR :
Ideally I would prefer a drop down with dates and the user could select a forward date and all the columns with dates up to that would appear. This would mean they could look as far our as required and all unwanted data would be hidden.
Hide Rows Based Over Multiple Columns
Jan 29, 2013a code that will search each cell across 4 columns and hide the row only if all cells are blank. The macro should search columns "b", "c", "e", and "f" to display all rows where at least one of the cells has a value.
Ex.
Col.B Col.C Col.D Col.E Col.F
1. 123 xxxxx 150
2. 56 xxxxx 50
3. (blank) (blank) xxxxx (blank) (blank)
In this ex. row 3 would be hidden.
Add Value Based On Cell Content
Mar 18, 2009I have a named range (D:16 F:800) called “NameRange” which contains names.
I’d like to create a macro which offsets a letter “x”, 10 columns to the right everywhere that name appears within the range. As an example: If I’m trying to find the name Tom, A dropdown menu shows the name “Tom” ( which I’ve created) whereby it calls upon a script to search within the named range from this:
Bob Kim Tom
Tom Sue
Mary Bill Ted
Tom Sue Bob
Fred Bill Sue
Bob Tom Kim
and offset “x” to look like this:.......
Hide Rows Based On Text Search In Three Columns?
Mar 22, 2013I am working on a time management sheet for my company. I need to be able to click a button and have the file search 3 columns for a persons initials and then hide all the rows where the initials are not in at least one of the three columns. I seem to have no problem getting it to work for one column at a time, but as soon as I try to search more than one it all falls apart.
I will also need to create an unhide all button to reset the sheet after the macro has been run.
I have attached a sample of the sheet below. Each project needs to have 3 rows to show the schedule and budget broken down by each team member.
Project Number
Address
Service
PM
SS
[Code]....