I have numerous tabs in this file, but all of the tabs all summarize to the first tab called "Annual Record".
So after "Annual Record", tabs follow as "WO1", "WO2", etc...
On the tab called "WO1", I have cell AJ5, which can have 3 status selected (Data Validation List), which is either Inactive, Open, or Completed. If cell AJ5 on "WO1" says "Inactive", then I want a named range on "Annual Record" to be hidden. Right now I have the range named "WorkOrder1". This named range is essentially rows 4-7. So if it's easier to hide rows vs. a named range, then so be it. I also would like it to happen automatically (perhaps what you would refer to as a change event). When cell AJ5 is change to either "Open" or "Completed", then the rows would unhide. I'm thinking that this would be repeated for tab "WO2". If cell AJ5 says "Inactive", then rows 8-11 on the tab "Annual Record" or the named range "WorkOrder2" would be hidden. And again, if the cell AJ5 is change to anything other than "Inactive", then the rows or range would unhide.
I have a macro that I am trying to add a feature to at the end of the code that hides blank rows. I have tried numerous methods based upon other forums, but my code does not seem to work and does not hide blank rows. In red is the section of code that I am having trouble with.
Dim c As Object Dim rngA As Range Dim cc As Object Dim AA As Range
'Check every cell in the range for matching criteria.
I am trying to work out a macro to hide and unhide rows in worksheet 6 based on a cell input (cell I6) in worksheet 1 based on the following:
>> If I6 in Worksheet 1 = 1 or 5 or 6 then Hide Rows 19 to 24 in Worksheet 6 >> If I6 in Worksheet 1 = 2 then Hide Rows 21 to 24 in Worksheet 6 >> If I6 in Worksheet 1 = 3 or 4 or 7 then Hide Rows 17 to 20 in Worksheet 6 >> If I6 in Worksheet 1 = 8 or 9 then Hide Rows 17 to 20 and Rows 23 to 24 in Worksheet 6
The first code hides everything just fine based on the date in A1. When I change it to the second code to delete instead of hide it is leaving a bunch of rows that the 1st code hides. Both codes have the same search criteria.
Code: For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Hidden = True Next cell
Code: For Each cell In Range("B8:B5000") If cell.Value Range("A1").Value Then cell.EntireRow.Delete Next cell
coding a VBA macro for one of my workbooks, in which I need to be able to hide/unhide various rows in one worksheet depending on the value of a cell in a worksheet elsewhere in the workbook. The rows start off hidden by default.
As a simplified example:
Worksheet1 has a cell that has option "Set 1," and "Set 2." Worksheet2 has two sets of rows (say, 20:30 and 40:50) that need to be hidden/unhidden depending on the cell in Worksheet 1. These are hidden to start with!
So if Worksheet1's target cell says "Set 1", then on Worksheet2, rows 20:30 would stay hidden and rows 40:50 would be revealed, and then if the target cell says "Set 2," then on Worksheet 2, rows 40:50 would then be hidden, but rows 20:30 would then be revealed.
I was thinking of using something like this:
Rows("20:30,40:50").EntireRow.Hidden = True If Target.Address="'Worksheet1'!A1" Then If Target.Value = "Set 1" Then Rows("40:50").EntireRow.Hidden = False Else Rows("20:30").EntireRow.Hidden = False End If End If
I think this might work, but every time I try to run this I get various errors, like not referencing my target cell correctly.
I am building a real estate model. What I am trying to do is the following:
If I enter the number of tenants in a cell (let's say the number of tenants is 6 and the cell I enter this number in is cell J11), I would like 6 of 15 rows to be shown below (rows 46-60). Therefore, the 9 unused rows (rows 52-60) would be hidden from sight. Furthermore, if I entered the number 3 for the tenant count, excel would hide 12 rows (rows 49-60). I am sure that this is a VBA code.
I have a problem with hiding and unhiding columns. Is there a way wherein I can automatically hide the row(s) if the cell = "N/A" and will unhide if it's not equal to "NA". see the attachment Im using excel 2003 btw. You can see in Sheet2 to that it contains the table for the student grades. "N/A" means that they are not enrolled on that subject. While in sheet1, What I want to happen is that you will select a student name and below, it will automatically display the grades of the student on their enrolled subjects only. So, those fields with "N/A" will hide and when I update the value of N/A it will unhide.
I have had great success using this code to hide and unhide unused space, but for some reason this morning it broke. Most likely it is my error so I am looking for another solution to resolve the issue. What i would like to be able to do it hide an entire row based on a specific cell being blank. maybe that is what this code is supposed to do but like i said it broke this morning. the cell in ref in the code is unchanged, but i did add formulas to some other cells in the same row. this is why i am looking for a way to do the same thing but based on a specific cell being blank vs what is occuring now.
I have some vba code that is used to hide any rows with the cell value of "Finished". The code is below. When I run this code I get a run time error 424 - Object Required. Can you please explain or help as to why I am getting this?
As a side point the data is loaded from an oracle database rather than from the sheet but every other function/code works fine.
Code: Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address(False, False) = Sheets("Sheet2").Range("A3") Then 'A3 is the cell where your Yes/no choice is Select Case Target.Value Case "Yes": Sheets("Sheet1").Range("A7:A22").EntireRow.Hidden = True Case "No": Sheets("Sheet1").Rows("A7:A22").EntireRow.Hidden = False End Select End If End Sub
in worksheet "sheet1" I have my inputs... in "sheet2" I have my outputs... my inputs could be anything from 1 to 1000 therefore my outputs would be 1000... on the output sheet, below the last line, i have a whole bunch of text and calcs that I will always need at the bottom... what i would like to happen is if I put in "sheet1" b2 a number, say 5, then "sheet 2" would hide rows 10 to 1005 or if i put in "sheet2" b2 say 925, it hides 930 to 1005...
I created a macro, but it doesn't work at all... and i want it to work automatically without me pushing run macro...
For data validation lists B27 to B30, if any of them is equal to "EBS via ULL" then unhide rows 31 to 42. If any of the data validation list not equal to "EBS via ULL" then unhide row 44 and hide rows 31 to 42. If "EBS via ULL" and any other product in the lists is selected, unhide rows 31 to 44. If validation lists B27 to B30 are all equal to "Select Product..", then hide rows 31 to 44. I would like to use the worksheets_change event.
How do I go about hiding empty rows in a separate linked sheet? To be more precise, I'm working on 2 sheets now. Sheet 1 would be the input sheet and sheet 2, the output sheet. For instance, there are 10 rows of data in Sheet 1, but out of this 10 rows, I planted data only into 4 rows. How do I ensure that Sheet 2 hides the empty rows (5th - 10th)?
I have inserted a combo box on Sheet 1 with two options in the dropdown ('A' and 'B'). I would like to write a macro to assign to the combo box so that if the user selects 'A' from the dropdown, rows 1-3 are hidden on Sheet 2, and if 'B' is selected, rows 4-6 are hidden (with rows 1-3 unhidden). I have tried unsuccessfully to write any script that even comes close!
automatically hiding empty rows on my table... though the table has been referenced via string of formulas which I added up on my worksheet.. Some of the rows on my table are empty and I tried a VBA code on automatically deleting the rows but then I realized that if that certain 'referenced' string of that cell is not empty anymore, that would cause me much trouble.. so basically I need a code that would automatically hide the rows that displays a result of "" and unhides when it is not empty.
I have inserted images into cells, but when I hide the column the images are not hidden with that column, they just get squished between the two cells next to the hidden cell. Is there a setting or way to tie the image to that cell so that it hides/unhides appropriately with the row?
I am looking for some help with my data, I have this excel sheet in which i have certain abbreviations and answers to some questions which we use on our daily job. Now what i want to do is create a search box on the sheet and find the matching Abbrevation on the complete excel. The trick here is to hide every thing else when i search for some thing and see only for what i want to see in order to not to get confused. I am attaching the excel to give an idea to what i am looking for.
I am trying to Hide and Unhide several rows depending on if several checkboxes are marked or not.
This is the code I am using, which is effective in hiding and unhiding the rows. However, the issue I am having is: I want Row 20 to stay visible if either one of the checkboxes is marked. This string of code runs the "hide" portion if either box is unchecked.