I have seen a few threads here about this, but not for how I need it to work.
I will have a drop down list with 8 options, (Days of the week Wed to Wed, hence the 8 days lol) There will now be 8 columns, one for each day.
I want to be able to select the day from the list, and then have it hide all the columns except for the day selected. When a different day is picked, un hide that one and hide the rest.
I will attach a book in the reply...
I used this method to hide previously selected values in a drop down menu. I thought by including that value multiple times in my "employee" list, I could use it multiple times before hiding it. Is there any way to skirt this? I need to use each value three times before it disappears.
View 2 Replies View RelatedI wanted to hide/remove the already selected options in a dependent drop down list so that the next time i am left with only the remaining options.
View 7 Replies View RelatedColumn C and D are should be picked from a dropdown list (data is in named range on sheet 3).
The choices that have t become available in a dropdown list in column E (values also in named rnage on sheet 3) should be based on the combination of column C and D.
The choices that have t become available in a dropdown list in column H (values also in named rnage on sheet 3) should be based on the value of column C.
I'm not sure the way it is set up now (as far as it is setup) is the way to go.
Here is a link to the file : [URL] ...........
I have a drop down list with 6 recipes. When I select chocolate for example I want that to automatically populate different cells in the worksheet based on a standard I have created for that recipe. The recipes won't change they just have different ingredients and I want that to show up depending on what I select on the drop down list. I went into VBA and worked a little with this starting code:
If Target.Address = "$F$3" Then
Target.Offset(0, 1).Value = "1"
but It wouldn't populate separately based on what I had selected in the drop down it would just populate all 6 recipes the same.
I have a column of 343 items in E, and their corresponding prices in Row E. I've created a drop down list in numerous cells in Column A for items, and I need to formulate it so that the adjacent cell in Column B for each individual drop down will call the correct prices from E.
View 4 Replies View RelatedI would like to auto-fill cells based on what I select from a drop down list.
For Example:
Drop Down List is located in A1(already created). Let's say it lists items like bathroom,front of building, dinning room etc.
I have created on sheet 2 a list of responsibilities for each item on the drop list. The list has a header for example bathroom and a below it list the responsibilities. I did this for every item on the drop list.
Now, is it possible to select bathroom from the drop down land when selected the list I created in sheet 2 show up in the cell next to bathroom? Also, is it possible to have this happen every time i select a different item from the drop down list?
I want to be able to pick a word from a drop down list and for related information to appear in the next cell. I just don't know the function to do it.
Here's an example: I have a list of first names and second names in adjacent columns.
Excel question 1.jpg
In the 2nd sheet I have a drop down list of the first names:
Excel question 2.jpg
Is there a function to make the corresponding 2nd name appear in B1 when a first name is selected. I've seen examples where INDIRECT is used to create a dependent drop down list in B1 but I'd like the information to automatically appear.
I want to control 2 cells values from a dropdown list (linked to another worksheet). How is it possible?
I can do it with embedded ifs as long as the number of values is not too big, but I want to get more extended.
I am looking to auto generate a roster/schedule. I have a spreadsheet with shifts for each weekday that I need to populate every week with names to pick from a drop down list. the drop down list is made using data validation and looks at a dynamic named range to allow me to select only the people who are available to work a certain shift.
Is there a way to do this using vba?
how to create drop down lists which is making a sales forecast template for my small company look pretty jazzy. Of course, now I want more out of it and can't figure it out.
I successfully added a drop down list for a sales person to pick a supplier, let's say their selection populates cell E4. Once selected, the next cell over (F4) gives them another drop down list with the products made by that particular supplier. The next cell over (G4) is in a column titled "Unit Cost", how can I make the Unit Cost cell populate automatically when the product selection is made in F4?
NOTE: My "lists" are on Sheet 1 along with my working spreadsheet. I have a Suppliers List, Products List (for each supplier), and anticipate I will need a Price List for each Product List, right?
Once I finish the spreadsheet can I cut and paste all the data to sheet 2 (I put it 100 rows below my spreadsheet to hide it)?
I want our sales people to be able to select from the list of products we manufacture and have they corresponding information automatically populate. For example, if the salesperson is trying to put a quote together for 500 lbs. of Stainless Steel nails, they can select the correct size and have the list price, cost, margin (etc...) fill in the adjacent cells automatically.
View 5 Replies View RelatedI have a workbook that has about 30 different sheets with names titled "Joe", "Jane", "Paul", etc.
I have a Cell (B12) that has been formatted as a dropdown menu with about a dozen different options such as "Audit A" , "Audit B" or "Other" etc. What i'd like to do is hide or display certain sheets based on what the value is in cell B12.
if cell B12 says any of the following "Audit A" or "Audit B" then it would hide certain sheets. If the value in B12 says "Other" or something other than "Audit A" or "Audit B" then it wouldn't hide anything at all. I tried searching and couldn't find anything like this although it may have been answered before.
In one column I have a drop down list of a dozen different initials with conditional formatting on those cells. I would also like to conditionally format an adjacent text string column based on those initials, but don't want to set up a dozen rules on each cell, one by one. If I set up the top cell with the correct rules I cannot fill the formatting in because the formula is not updated on a row by row basis, but en bloc for the range.
View 3 Replies View RelatedHow do i make a drop down list in a cell show Select One in the cell when the cells previous contence (Option selected from drop down list) have been deleted. E.g Cell E5:E400 must show Select One in the cell and when clicked on show drop down list I dont want a input message box or error box i can do that with validation
View 1 Replies View RelatedI've made a drop down list and when I select multiple cells and choose from the drop down list, it only fills one. Here's pictures:
So in that first picture, I've selected multiple cells. But when I drop down the menu and click my selection, this happens:
Why is it that all the cells I've selected does not fill with the option that I chose from the drop down. I highly doubt that I have to manually click all the ones I want to fill with what I choose from the drop down list.
I am currently working on a workbook for work. It is a basic input output sheet. I have data from work that i copy and paste into sheet 1 and I have it arranged into sheet 2.
I am using windows 7 with Excel 2010, though needs to be compatible with 2007 using XP.
What I am trying to implement. I would have a drop down box in cell AD-4 with the current list
Select
Week 1
Week 2
Week 3
Week 4
What I want to implement is a code that if I select "week 1" from drop down then it will hide the entire row if data in column B = week 2, week 3, week 4, week 6
also
If week 2 is selected then hide entire row if column b = week 3 , week 4, week 5
so basically hide the weeks that are after the current selected week.
In addition to this I would also like to hide the entire row, regardless of drop down selection if data from J, K and O all = 0 or (blank).
(the first row is the current Row labels, I have a lot of current hidden columns).
A
B
J
K
O
Supervisor Name
Agent Name
Needs Complete
Completed w/o Turn in
Needs Turn In
[Code] ........
I have a sheet with a data in range A1:J9. I have a drop down list in each cell from A2:A100.
I'm trying to store all values in A1:J9 in an array using the property CurrentRegion.value like below
Code:
Arr=Range("A1").CurrentRegion.Value
The issue is that is taking as current region the range A1:J100, even if I don't have selected any value in the drop down list from A10:A100.
Is there a way to force CurrentRegion to select only values from A1:J9 ignoring the blanks dropdown list values or a similar way to load an array with values in a contiguous range?
I need to make a dropdown list (I know how to do that) and based on that selection, I need some cells below to automatically complete. How can I do that? Is it possible with or without VBA?
View 5 Replies View RelatedI have a list of Names that has numbers accumulated over months. I am looking for a formula to use in a search tool that uses a drop down list to identify the name I am looking for and then the formula will show me the increase that happened in certain months.
See the attachment the result is coming from Denominators tab, I want the answer displayed in the Display tab, you will see a drop down list at C3 in Display, I am trying to show the answer in cell D9-I9.
how many the denominator has increased in that month. so for D9 it will come from denominator tab column c minus b, E9 will be d minus c
Make a Data Validation dropdown list that also enters a range for cells, for example:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
Lounge ¦ Low ¦ Large ¦ Easy ¦ Blank ¦ 0 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 month
Bedroom ¦ Low ¦ Large 100 ¦ Easy ¦ Blank ¦ 1-3 ¦ Daily ¦ 1-3 ¦ Low ¦ >1 year
Bathroom ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 0 ¦ Weekly ¦ 1-6 ¦ Low ¦ <1 year
I can make a dropdown list for:
Kitchen
Lounge
Bedroom
Bathroom
But if I select "Kitchen" I would like it to enter the rest of the cells in that row:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
The total number of rows I use is 10, and the number of items in the dropdown list will be 30.
The data in the cells 2 to 10 does not change from that first set to its data menu name.
I've created seven names in my data validation source list on Sheet 3 in the following range of cells, A2-A7. My data drop down validation list is located on Sheet 1, A2 in the same workbook. I would like to trigger a macro based on the name I select in this drop validation drop down list that will fill out an address, telephone number, and email address in the following cells next to my data validation drop down list on Sheet 1: B2, B3, and B4. I want it to be designed so that users will select a name and have that person's corresponding address, telephone number, and email address fill right next to their name on the same sheet.
View 6 Replies View RelatedIn the coming months the company i work for will be transferring from Excel 2003 to Excel 2010 (i know, a little late......) and now i am testing some things at home.
We deliver lots of Excel reports to our clients where we are using Pivot tables. In excel 2003 we where able to hide items from the dropdowns using properties - hide items but when i now open an excel 2003 file in excel 2010 and want to filter the pivot table to (let's say) another month i see all my hidden items.
Is there an option in excel 2010 to hide items like i could do in 2003? (either regular option or VBA)
I'm trying to write macro for hiding columns based on a drop down answer. The drop down would be in cell B7 on Sheet 1. The colums affected would be in each worksheet in the workbook. The data validation would have a drop down selection choice of 1 through 16. The columns affected range would be H through W. For example, in the drop down if 1 was selected, only column H would show. If two, H and I would show...etc. This macro should affect all worksheets in the workbook EXCEPT sheet 1.
View 2 Replies View RelatedI have a workbook that has two worksheets. One worksheet is an input worksheet. A user will select a date from a drop-down list and type in the events that occurred on that date in 8 adjacent cells. The user selects a button that advances date and clears form. On sheet 2, whatever was typed into sheet one is saved via VLOOKUP formula. However, if I try to change something retroactively and select a previous date from the drop-down list, it clears everything in sheet 2 that was typed for any selected day.
View 1 Replies View RelatedI am looking to write a code to lock/unlock cells based on values selected using a drop down list (see attached Excel) For example if Netherlands is chosen as the Country (Column A), then except for the columns Amsterdam (column B) and Eindhoven (column C), all other columns must be locked. Similarly, if India is chosen as the country from the drop down list, then only the columns New Delhi and Mumbai must be editable for the user, the rest of the columns remain locked.
I tried tweaking some of the lock/unlock codes around, but got lost especially with getting to run the macro - still trying to come to terms with running a "Private Sub Worksheet_SelectionChange" function in the sheet from "Module"!
Cells B2:B100 contain a list of sheet names, cells C2:C100 have entries TRUE or FALSE.
Is there away to setup a macro that goes through the list and if false, make the sheet very hidden, if true it should be visible?
I keep a client list and excel at random will essentially hide entire rows of entries. For example if I go to search a name from the name column that I know I entered nothing will return but if I specifically enter the cell number that is hidden the information will be show, does excel 2011 have an auto-grouping or hiding feature that I'm not aware of? If so, how do I get rid of it? I'm not sure if this makes a difference but all the numbers to the left most of the sheet are blue where in every other sheet they are gray.
View 2 Replies View RelatedIf you choose entry number 1, Lines 10 to 14 are hidden. If you choose entry number 2, Lines 15 to 29 are hidden and lines 10 to 14 are unhidden. If you choose entry number 3, Lines 20 to 25 are hidden and lines 10 to 29 are unhidden
Until now i have the following:
[Private Sub Worksheet_Change(ByVal Target As Range)
Rows("10:25").Select
Selection.EntireRow.Hidden = False
If Range("A1") = "1" Then
Rows("10:14").Select
Selection.EntireRow.Hidden = True
ElseIf Range("A1") = "2" Then
Rows("15:19").Select
Selection.EntireRow.Hidden = True
ElseIf Range("A1") = "3" Then
Rows("20:24").Select
Selection.EntireRow.Hidden = True
End If
End Sub]
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
