i have a sheet which contains large data.All the cells as formated as TEXT
e.g. value -863.45 appears as 0000-863.45
I have 3 types of values
1. headings => HEAD-1-TEMP-DATA
2. Only '-' sign => -
3. Numeric values with -ve sign => 0000-863.45
i want to hilight on Type3 values ..... is it possible with conditional formatting.
Or any other way w/o changing any value in the original sheet?
This is a conditional formatting problem I have not been able to resolve:
I have a range, say A1:N30
Each cell contains a text/number combination.
I would like to highlight each cell on a specific row if the vale exists within the row above - the issue is that the cell values are not in the same columns.
I have attached a sample workbook with the desired output.
Conditional formatting.xlsx
I have a spreadsheet where if Cell A2 says "Deposit", Rows A2-E2 would be formatted with a Blue background.
I've tried conditional formatting, but I can't built it into a Macro (I can't make it run), and it only highlights the cell that has that value. I also tried having the spreadsheet filter down to only the values I want highlighted, then highlighting all cells and un-filtering the column- this didn't work either.
It would basically say :
If (any cell in Row A) has text = "Deposit" (it needs to be exact, it can't be "containing"), set cell with the word "Deposit" and 4 cells to the right as Blue (I'm not picky about the color).
If I wanted to highlight a cell if any cell in the range to the right was greater than zero, what formula would i use. I have tried =IF(L1:AD1>0,1) with the result returning for only the cells in column L. Row 3 has no value in column L but a value in column N with no result to highlight the cell.
View 4 Replies View RelatedLet's assume Cell A2, A3, A4, etc, only contain names/text.
Then let's assume I have set up cell B2, B3, B4, etc, to contain a percentage value based on a formula and some other entries I have made.
It should be simple, but I'm having trouble - how do I set up A2, A3, A4, etc, to highlight into different colours based on Column B's data/percentage falling into a certain range?
ie: - if B2 is between 0% - 25%, then highlight A2 green
- if B2 is between 26% - 50%, then highlight A2 orange
- if B2 is between 51% - 100%, then highlight A2 red
How can I change the font color or highlight cell A1, when I select cell A2. Cell A2 is still blank, no value entered yet. I also would like cell A1 to return to original font color or no hightlight when cell A2 is no longer selected (active), whether a value is entered or not in cell A2. Let me clearify, (A1 thru N1) and (A3 thru N3) have diferent dates and the font color is white, as is the cell too. Therefor you can not see the dates in (A1 thru N1) or (A3 thru N3).
However, when any cell (A2 thru N2) or (A4 thru N4) is selected (example A4), the cell above it (cell A3) changes font color or highlights, so the date can be seen in (A3). But when cell (A4) is no longer selected the above cell (A3) hides the date (changes back to white font on white cell). Data or a value is not necessarily entered into (A4) for (A3) to change. (A4) is only selected to show the date in (A3). But if data or value is entered into (A4), the date in (A3) will still be seen until (A4) is no longer selected/active.
i have got a spredsheet, with clients names on it and in cell Q i have the clients account number, when iam looking at the clients name i also want to see the number, is there any way to highlight the cell i am on.
What i mean isusing the arrows keys i want to make the row highlighted, is there a way to do this
I have a file in which I Concatenate the cell values like A1, B1, C1 and this vlookup of this concatenated value to the another range where same concatenate is used.
what I want to do is:
highlight the cell which is different in two concatenates.
For ex.
VLOOKUP
CONCATENATE
Value 1
Value 2
Value 3
CONCATENATE
Value 1
Value 2
[code].....
As you can see, in the above example I want to highlight the cell value which is different in two concatenates.
Have ABC row and EFGH row and just want to color the cells that only have
double numbers in it....In Conditional formatting----
example---All are in separte rows---
ABC ------EFGH
123-------5544-----55red----44red
332-------4498-----33red---44red
212-------2132-----22-----22
just the doubles I need to color them RED---
[Code].....
I am running a time series linear regression on a credit card company. The left most column is the amount of cards they had on a certain year and the prediction is the cards the regression formula predicted. The + and - are the columns added or subtracted the standard error which is 3.25. I am trying to highlight the closest +/- number to the original cards. For example, in the first Row 76.98 is closer to 78 than 83 is so i would like to have 76.98 highlighted...showing that subtracting the standard error gave us the closest prediction. The second column the 87.085 cell should be highlighted because adding the standard error gave us the closest prediction to 86.4.
I have a spreadsheet that records "Audit Date" in column C & "Audit Due Date" in column D. "Audit Due Date" is always 2 years from "Audit Date". I think I learnt the correct forumla to use =EDATE(C2,24). What I would like Excel to do is to highlight "Audit Due Date":
Red: If the audit was completed 1.5 years+ Amber: If the audit was completed between 1 & 1.5 years Green: If the audit was completed less than 1 year The colour key will show me which audits need chasing.
I'm having a difficult time making this work properly.
To simplify, I want:
cell A1 to fill with blue when cell G1=0 or greater.
cell A1 to fill with yellow when G1<0
Next step is to apply this to cells A1:A100 based upon cells G1:G100.
Need to have only active cell in in any worksheet highlighted or formatted in a different way than other cells
View 1 Replies View RelatedIs there a way that when a cell is selected it will highlight the cell and all of the cells along the same row?
View 12 Replies View RelatedI want to do it evaluate each row and if the last value for that row is X, then highlight that cell and the Server name for that row.
I have used conditional formatting but it seems that I cannot specify an option to look at the last cell in a row, evaluate that cell's value and then apply the formatting. I can only have conditional formatting highlight every cell in that row that matches the condition.
I only want the last cell, which represents the most current data, to be highlighted, as well as the category name, if the condition is met.
Just "upgraded" my Excel to the 2007 version. In the old Excel, I could superscript part of a cell by highlighting the part I want, then going to "Format" and "Superscript."
In Excel 2007, it doesn't work. Yes, I can highlight the part of the cell I want to superscript, I can right-click and select "format" and "Superscript", and it even then shows as superscripted in the cell. That is, until I hit enter or move to a new cell. Then the superscript is no longer there. The cell is in "general" number format.
By the way, it did work in another cell: mg/l3 (3 superscripted) works. 742 (2 superscripted) doesn't work.
I am new to excel and have to create a comparison chart that shows the lowest cell result in each row ie
23 25 28 13 42 16 13
21 34 25 17 21 23 17
I will have 36 rows by 20 columns I also need the lowest in each row to appear at the end of the row in the total column. I would like to highlight the cell by a cell colour rather than text colour.
I don't know if this can be done but I will ask you guys anyway
On the attached, you will see what I want to happen
If a user enters text into row "T" that contains "QIN" can conditional formatting highlight the cell in row N a solid colour if no numbers have been entered? As a reminder to users..
I have a macro that already works well but I need to make a change to it and I can't figure out how to do it.
I need so when the macro is run it will prompt the user for a date. After they enter the date it will highlight cells A:K on each row that data appers.
A little background for this. It is a schedule for a call centre which can show two to three weeks of schedules per agent. We rerun the macro each day to update break times and I would like it so it will highlight todays line.
How do i highlight from given cell (A3) to end the of the list in that column without giving a specific range?
View 5 Replies View RelatedI have a bit of code that should find a blank cell within a column and paint that cell as a color 6 (color of a yellow highlighter).
View 5 Replies View RelatedHow can i highlight cell "TE001 in 6/19/14" to red color if it duplicate value within the same day, but will not highlight cell "TE001 in 6/20/14" if not in the same day...
Date
Code
6/19/14
TE001
6/19/14
TE001
6/20/14
TE001
Here is a selection of my data:
[data] ......
Now here's what I would like to achieve.
If I click or maybe double-click on a cell I would like the cell colour to change to lets say yellow. However, I would like all matching cells to change colour too.
So from my example above if I clicked on C13 "3 TIMER" then C13 would change to yellow as well as C14 - C17 - C18 - C19
I would like my function to highlight the cell that is different. I will be comparing 3 cells which should have the same value. What I would like to have happen though is to have the function highlight the cell that is different from the 3.
Public Function Balance(A As Range, B As Range, C As Range)
If (Abs(A - B)
i have a loop which runs through column A and column B and if the value of column A is less than the corresponding value(same row index) of column B, then i need to highlight both the cells...
View 9 Replies View RelatedIs it possible to have a specified shading (say 50%) applied to all rows except the currently picked row and the header rows to allow a user to focus on inputting across the row? I'd use this in conjunction with " Move Selection After Enter" to "Right" so the user would stay on the same row. I've tried the Help function, but can't find anything.
View 3 Replies View RelatedI'm trying to make a macro. I'm experienced with Excel (took a college course on it) but am really new to VBA and making my own macros.
I need a macro that will take the item number in cell E4, and highlight the row (specifically columns B through R) where that unique item number is found (they're located in row B).
I could not find an easy solution to the find/remove duplicates in a row from left to right.
I have an other option: sort all data in one row, then it will show me, if there are any cells with the same word.
But .. here is my first problem:
First row is A1: AS1 with data.
A2: BB2 with data
A3: BD3 with data
A4: BX4 with data and so on.
When I start at A1 and press Shift/CTRL/Arrow right, it will hilite the row until BX1 and if I use the sort command, it will place all empty cells in front of the data.
What I need is hilite only up to the last column in that row.
So I could slowly work myself downward. Or prehaps there is a formula?
I could insert an empty space and write the formula in A1 and copy it down to A1644.
I want to do a arrangement for a file like this " wherever cursor moves in excel that particular cell will highlight with color and once it goes to some other cell that last highlighted cell will come as a ordinary cell"
View 5 Replies View RelatedWhat I want to do is select all rows that contain the word conveyor in it. So far I have managed to select all the cells, I have also managed to select the entire row but one row at a time, I have even been able to turn all the cells a different color but I just want to highlight them for other formatting, copying, and several other things that need to be done. I have other documents this could be very useful in too so i want to make it a generic multi-line highlight rather than adding the formatting into the formula.
View 9 Replies View Related