i have a loop which runs through column A and column B and if the value of column A is less than the corresponding value(same row index) of column B, then i need to highlight both the cells...
View 9 RepliesI have a spreadsheet where if Cell A2 says "Deposit", Rows A2-E2 would be formatted with a Blue background.
I've tried conditional formatting, but I can't built it into a Macro (I can't make it run), and it only highlights the cell that has that value. I also tried having the spreadsheet filter down to only the values I want highlighted, then highlighting all cells and un-filtering the column- this didn't work either.
It would basically say :
If (any cell in Row A) has text = "Deposit" (it needs to be exact, it can't be "containing"), set cell with the word "Deposit" and 4 cells to the right as Blue (I'm not picky about the color).
I need a macro to highlight a cell based on other cells.
For example:-
1. I wants to highlight A3 in red if all the cells from I3 to Y3 are empty.
2. I wants to highlight A3 in yellow if I3 is filled and J3 is empty
3. I wants to highlight A3 in green if if I3 is filled and J3 is also filled.
Actually I am having a grid which shows all the components of watch like KIt, case, dial , strap,hands.
The A row is purchase order no and then I3 and J3 belongs to KIt means if a po is not then I3 and J3 are empty so A3 is high Lighted in REd and if a po is placed then we put supplier name in I3 and it changes the color to yellow and when a po is confirmed we put confirmation date in J3 so A3 turns to green.
So in this way we can see if any Po is not yet placed or not yet confirmed based on cell color.
Macro to highlight a cell A1 every monday ( or any day) when we open the book for the first time.
Macro should not run when we open the book from the next time till that week gets over and again it should run once the next week started.
I'm having a problem getting this macro to work with the variants that have a letter in them. "A0220" and the like. All of the number only variants are found and highlighted just fine. What do I need to do to get the macro to find the letter ones? Here is the macro I'm working with currently.
View 11 Replies View RelatedCan this be automated?
I have an excel sheet called "Summary Tab" where I highlight specific rows that has the largest variances for the month. And, then within the same workbook I have about 10 different sheets which has more info regarding the accounts hightlighted in the "Summary Tabs".
For example, the following accounts were hightlighted in grey in the summary tab.
-------- Column A
Row 1 -- Training
Row 5 -- Printing Expense
Row 9 -- Travel Expense
Row 12 -- Telephone Expense
Now, i have to highlight the same accounts in Prior Yr, Current Yr, Detail tab...etc (all of the sheets in the workbook has different row for training, printing...etc
I tried recording this but it doesn't work like it should because each month the variance could be different.
Here's what i am trying to do... I have a workbook with lots of info, i believe there is a way to highlight an entire row and then run a macro that will then collect the info from certain columns (along the specific highlighted row) say, columns A-F and M & P for one example, the collected data will then be copied to a new pre-designed template, and pasted into set cells. The cells that the data will be pasted into will not be along one row though, the pre-defined template will resemble say, an application form Can this be done, I understand macros only at a basic level currently but am trying to understand the VBA way of creating them too now.
View 9 Replies View Relatedi have all countries in column A in sheet 1 and some countries in column A in sheet 2. how can i highlight same countries between two sheets from column A to Z in sheet 1
for example in sheet 1 column A is:
Albania
Algeria
Bangladesh
Belarus
Belgium
Belize
Benin
Bhutan
Bolivia
Botswana
Brazil
Bulgaria
Burundi
...
and in sheet 2 column A is
Algeria
Belarus
Belgium
Benin
Bhutan
Bolivia
...
abcxyzzyz
1009080zyz
506070abc
Have a formula that quotes the supplier at cell D2 , is there a macro that will highlight the minimum value each line that is 80 and 50 to be highlighted
Yes I know =min(a2:d2) will do the work
Macro copy & paste highlight. I HAVE THIS CODE
View 4 Replies View RelatedI have a large spread sheet. I need to find 38 accounts in the spreadsheet, highlight them across the span of the spread sheet and then do a sum if to the side. I need to use this Macro monthly on a new ageing and some months some of the accounts may not be in the ageing.
View 14 Replies View RelatedHow to create a macro that would highlight a row that has the following condition :
name
ref num
sam
123456
sam
123456
alice
342333
In this table, i need a macro that would highlight the row that has alice data due to it been having 1 ref number count under the ref num column. The macro should loop and end with msg " there are 'x' records having 1 ref number count"
I would like a macro to highlight duplicate numbers in Col A in Sheet1.
View 4 Replies View RelatedI have a spreadsheet with month names in column A10 and down and want to highlight the row based off a cell(which will be A3) so if cell A3 = Nov it would highlight all rows that have Nov in column A. I don't want to highlight the entire row just columns A.
View 5 Replies View RelatedI have a macro that displays a calendar with code to highlight the current date, but this part of the code does not work and the current date is not highlighted.
View 14 Replies View RelatedI have created a macro to open a workbook from another workbook and do a vlookup against the data in the source workbook. I then wanted to highlight the cells in the in the workbook that I'm doing the vlookup from, and to unhighlight any empty cells. I did this all without code using the macro recorder so that I could then study the code and learn something.
View 2 Replies View RelatedIs there a way i can have a macro find the unique values in these 3 columns and highlight them yellow.
They should find uniques using all 3 columns, not find them within each column.
I included a file which shows what i start off with and what it needs to look like. Also if it matters the contents in the cells are from links. ( i know that matters because you have to put look in values in the code ).
I would like to know how I can have a macro run on an excel sheet of mine.
I have a little database with a few names and email addresses submitted to me via web.
But some people tried to register to my services TWICE with a different name, but same email address (not smart eh)
I would like to run a macro on a column and have it search for duplicate values and highlight them in... blue perhaps.?
P.s. the column format is set to 'TEXT'
I have 1 workbook contains 2 Sheet with Name and Address in Column A,B,C,D. Sheet1 always contains New Data of Name and Address and its import from another software.
I need a macro to Compare these 2 sheets, Highlight the rows which is not in sheet2
If two parrallel cells in column D & G equal "0" then highlight that row with ======== (Thin Horizontal stripe)
Example:
D2 and G2 both = "0" ( Macro Applies. Row 2 is highlighted with Thin Horizontal Stripe).
D2 and G3 both = "0" (Macro does not apply since they are in different rows)
D2= 1 G2=0 (Macro does not apply since they both dont meet condition.)
I am looking for a macro to highlight duplicate data in Col A.
I have googled etc, and found quite a few, but some were slowish, some didn't work, some did.
The best I have found so far is this 1. I believe this was posted by Richard Schollar
Sub ColorDupes()
Dim v As Variant, r As Range, i As Long, j As Long
Set r = Selection
v = r.Value
For i = 1 To UBound(v, 1)
For j = 1 To UBound(v, 2)
If Not IsEmpty(v(i, j)) Then
If Application.WorksheetFunction.CountIf(r, v(i, j)) > 1 Then r(i, j).Interior.ColorIndex = 3
End If
Next j
Next i
End Sub
This seems to run fine and be quite quick providing I highlight the column first.
What I'm looking for is a pop up window to also show me some data relating to the duplicates. I usually work with large lists and would like the macro to say how many duplicates it found from how many rows of data.
It is a very handy macro, and is very short on the coding side I notice compared to all the others I found (Which is Good?), I'm no coder
I have a worksheet with multiple sheets.
Users and Data
In users column A has email contacts from people that accessed a recoding on line. I need to be able to cross reference with another sheet called data where I will have their full name.
Basically I would like a macro that will check column A in users sheet and check in data the name column . If it finds last name or partial name in the mail it will highlight it in the users sheet and in the name column in data
User sheet
Column A is raw 1 is heading username
data sheet
column B is raw 1 Last Name
That way I am able to quickly identify a group of people if they did not watch the recording as user gives me indication on what they did.
I have been using excel form last 1 year. I do have good knowledge for macro but for validating emailID entry I am not getting success.,So if any body can give me a sample code for validating email ID entry or a macro for checking and highlight those email ID which r wrongly formated..
View 10 Replies View RelatedThis is a conditional formatting problem I have not been able to resolve:
I have a range, say A1:N30
Each cell contains a text/number combination.
I would like to highlight each cell on a specific row if the vale exists within the row above - the issue is that the cell values are not in the same columns.
I have attached a sample workbook with the desired output.
Conditional formatting.xlsx
If I wanted to highlight a cell if any cell in the range to the right was greater than zero, what formula would i use. I have tried =IF(L1:AD1>0,1) with the result returning for only the cells in column L. Row 3 has no value in column L but a value in column N with no result to highlight the cell.
View 4 Replies View RelatedLet's assume Cell A2, A3, A4, etc, only contain names/text.
Then let's assume I have set up cell B2, B3, B4, etc, to contain a percentage value based on a formula and some other entries I have made.
It should be simple, but I'm having trouble - how do I set up A2, A3, A4, etc, to highlight into different colours based on Column B's data/percentage falling into a certain range?
ie: - if B2 is between 0% - 25%, then highlight A2 green
- if B2 is between 26% - 50%, then highlight A2 orange
- if B2 is between 51% - 100%, then highlight A2 red
How can I change the font color or highlight cell A1, when I select cell A2. Cell A2 is still blank, no value entered yet. I also would like cell A1 to return to original font color or no hightlight when cell A2 is no longer selected (active), whether a value is entered or not in cell A2. Let me clearify, (A1 thru N1) and (A3 thru N3) have diferent dates and the font color is white, as is the cell too. Therefor you can not see the dates in (A1 thru N1) or (A3 thru N3).
However, when any cell (A2 thru N2) or (A4 thru N4) is selected (example A4), the cell above it (cell A3) changes font color or highlights, so the date can be seen in (A3). But when cell (A4) is no longer selected the above cell (A3) hides the date (changes back to white font on white cell). Data or a value is not necessarily entered into (A4) for (A3) to change. (A4) is only selected to show the date in (A3). But if data or value is entered into (A4), the date in (A3) will still be seen until (A4) is no longer selected/active.
i have got a spredsheet, with clients names on it and in cell Q i have the clients account number, when iam looking at the clients name i also want to see the number, is there any way to highlight the cell i am on.
What i mean isusing the arrows keys i want to make the row highlighted, is there a way to do this
I have a file in which I Concatenate the cell values like A1, B1, C1 and this vlookup of this concatenated value to the another range where same concatenate is used.
what I want to do is:
highlight the cell which is different in two concatenates.
For ex.
VLOOKUP
CONCATENATE
Value 1
Value 2
Value 3
CONCATENATE
Value 1
Value 2
[code].....
As you can see, in the above example I want to highlight the cell value which is different in two concatenates.
i have a sheet which contains large data.All the cells as formated as TEXT
e.g. value -863.45 appears as 0000-863.45
I have 3 types of values
1. headings => HEAD-1-TEMP-DATA
2. Only '-' sign => -
3. Numeric values with -ve sign => 0000-863.45
i want to hilight on Type3 values ..... is it possible with conditional formatting.
Or any other way w/o changing any value in the original sheet?