Evaluate Each Row And If The Last Value For That Row Is X, Then Highlight That Cell
Oct 8, 2008
I want to do it evaluate each row and if the last value for that row is X, then highlight that cell and the Server name for that row.
I have used conditional formatting but it seems that I cannot specify an option to look at the last cell in a row, evaluate that cell's value and then apply the formatting. I can only have conditional formatting highlight every cell in that row that matches the condition.
I only want the last cell, which represents the most current data, to be highlighted, as well as the category name, if the condition is met.
View 7 Replies
ADVERTISEMENT
Oct 29, 2009
I have two sets of information, on one hand I have telephone numbers and in the other set I have prefixes and countries. My goal is to tell to which country each number belongs:
i.e.
Numbers Prefix Country
4476324125 44 UK
3354326544 33 France
9713425432 971 UAE
9143253245 91 India
1343543253 1 USA
4432412412
4924241214
7431242424
So I would need to add a column next to "Numbers" saying to which country each number belongs.
My list has a few thousand numbers and a couple of hundred prefixes.
I tried with some array formula, but cannot make it work.
View 11 Replies
View Related
Apr 14, 2009
I have a column in excel and I want to evaluate each cell in that column and if the cell.value = a specified value I would like for it to copy and paste it in the cell to the left. Below is the code I am using but it isn't working.
View 2 Replies
View Related
Apr 3, 2008
I want to be able to use a macro to read cells from a certain column so that it will evaluate a text string untill it hits a blank space, then copy the text that it found. I'd like it to work on Excel 2003 or later
View 9 Replies
View Related
Oct 26, 2007
When using watch window to watch a formula that has multiple formula's in it, is there a way to see the result of 1 formula within the big formula?
E.g. say you have:
= SUMIF(A1:A11,"207",B1:B11)/COUNTIF(A1:A11,"207")
And you put a watch on that, but in watch window it shows the result of the whole formula, say if you want to watch only the SUMIF part?
Im using Excel 2003 by the way.
View 5 Replies
View Related
Nov 2, 2011
I'm trying to insert a random number into the unprotected cells on a worksheet depending on the type of number formatting in the cell. There are 4 basic cases:
Number formatted as percentNumber Formated general with no decimal placesNumber formatted general with two decimal placesNumber formatted in thousands
The code below only contains three criteria, I was trying to get that to work first....Based on this criteria I want to insert a random number of an appropriate size. Please find the vba below.
Sum randomnbr()
Dim F as String
For Each c In ActiveSheet.Range("A1:AK2500")
F = c.numberformat
If c.Locked = False And IsNumeric(c.Value) = True And c.EntireRow.Hidden = False And c.EntireColumn.Hidden = False Then
If F Like "*#,##0*" Then
c.Value = Round(Rnd, 0) * 1000000
If F Like "*%*" Then
c.Value = Round(Rnd, 2)
Else: c.Value = Round(Rnd, 2) * 1000
End If
End Sub
View 4 Replies
View Related
Jan 29, 2009
In A1, other code inserts the name of a Form control (textBox, comboBox etc), and in B1 it inserts the name of a Property that is always valid for the A1 control. I want to concatenate these two items to produce a formula in C1 that evaluates the current value of the Property on the running form and continues to update with each recalc. It's ok if I have to force a recalc to get the latest values.
The code feeding the items to A1 and B1 and which will be harvesting the Property values from C1 is running in the same Form that holds the controls being referenced.
So if A1= "Label1" and B1 = "BackColor", then in C1 I'd like the same result as if in VBA I said X = Label1.backcolor. I think that what I need is the Evaluate function, but I've read Arron's article on it I just can't seem to make it work here.
View 3 Replies
View Related
Mar 2, 2007
Is it possible, when user types for example "1+1" in cell A1, to calculate this sum in cell A2?
So I would have "1+1" in A1 and "2" in A2.
View 9 Replies
View Related
Nov 27, 2008
I cant figure out why this "evaluate" function is not working as I expected. I have number/text from $A$1 to $A$5 to try and learn how to use this function but have not had any luck. I need to learn how to use it properly so I can use a for loop to change multiple check boxes on a user form that I am trying to make.
View 8 Replies
View Related
Dec 16, 2006
I need a way for tell Excel to NOT evaluate a formula. Basically, I want Excel to leave the value being displayed in the cell alone. The formula in the cell is a function that I have implemented in C++ and registered with Excel through the Register call.
View 9 Replies
View Related
Jan 26, 2007
I cannot figure it out for the life of me. When I type a formula into a cell it will not evaluate, instead it just displays the text of the formula.
When I go to evaluate the cell -- Tools | Formula Auditing | Evaluate Formula
It tells me that "the cell currently being evaluated contains a constant."
What do I need to change so that cells will evalute formulas I put into the?
View 9 Replies
View Related
Jul 3, 2008
Need the syntax for using a checkbox in a col. ?
If checkbox checked >> Syntax ??
If un-checked >. Syntax ??
Does it simply evaluate to val. of cell to either 'Y' or 'N' ?
View 9 Replies
View Related
Nov 17, 2009
Example numbers:
21130 & 21065
I want to check each number if EITHER of the two conditions is true:
1. if the third digit from the right (the hundreth place) is greater than zero;
or
2. if the second digit from the right (the tens place) is >=6.
If either is true I want to add a particular number to the original number.
My example numbers meet questions 1 & 2, respectively.
View 11 Replies
View Related
Jul 2, 2014
I have to run an Evaluate function which is linked to an Array formula, but when I try just to put =ev(), the Array Formula which is located in another cell, does not run properly.
View 3 Replies
View Related
Feb 11, 2010
How can I evaluate just the first part of these stirings so I can just do something like Left("Ca",2)?
View 2 Replies
View Related
Jul 9, 2008
Im looking for a formula that will look at the the products in column A and see if their coresponding value in in Column I is equal to "website"
I would like it to count how many website sales the product has and return the product name in order of number of website sales into the top ten list at the bottom.
I have attached a test file which should clear things up
View 9 Replies
View Related
Mar 11, 2013
I have a problem in getting VLOOKUP to evaluate consistently. It is best understood from the screenshot linked (Office 2010), where cells B3 and B4 are not showing the expected values. I wanted to upload the excel file, but cannot see the option to do it.
The screenshot is at Book2 | Flickr - Photo Sharing!
This is just a small segment of the big excel sheet.
View 6 Replies
View Related
Jul 28, 2013
If I copy "mysum" contents to a cell and replace "lista" with a defined list, it works just fine. But whenever I run this code, it gives me syntax error.
Sub aaa()Dim i As Integer, myvar As Variant, tester As VariantDim mysum As Variant, lista As Variant,
alpha As Datelista = Sheet2.[D6].ValueWith Worksheets(Range("A10").Value) Do
i = i + 1mysum = Evaluate("SUMPRODUCT(((ISNUMBER(MATCH($B$8:$B$10007," & lista & ",0)))
*($A$8:$A$10007>(TODAY()-180))*(($E$8:$E$10007)+($F$8:$F$10007)+($G$8:$G$10007)+($I$8:$I$10007)+($K$8:$K$10007)))))
myvar = Evaluate("=TIME(10,0,0)>" & mysum) Loop Until myvarEnd Withtester = 35 - Sheet2.[c10]
alpha = mysumMsgBox "VALID for [" & lista & "] after " & i & " Day(s).
hours in last 180 days after " & i & " Day(s) will be (" & alpha & ")"End Sub
View 3 Replies
View Related
Jan 22, 2009
Ok, this should be an easy one. I have a formula that one of the functions needs to check if certain cells are blank.
For example; I want to check if A2, B2 and C2 are blank.
Currently, the only thing that seems to work is,=IF(OR(ISBLANNK(A2),ISBLANK(B2),ISBLANK(C2)),"PASS","FAIL")
This is just a piece part of the entire formula and I have to evaluate the data based on multiple criteria. The ISBLANK() portion has to be able to evaluate at least 15 cells. Is there a way to evaluate the cells all at once instead of typing out ISBLANK() over and over. I have tried everything I can think of in regards to syntax.
View 9 Replies
View Related
Feb 5, 2009
I cant see the wood for the trees! I have this formulae which works just how I want
ACO2 = Evaluate("= SumProduct((K2:K3=""Closed"") * (EG2:EG3=""06-15 Days""))")
However when I change this to a dynamic range I keep getting a syntax error. Can anyone see where I have gone wrong? I know its probably only a " or an ) out of place but its driving me mad!!!
ACO2 = Evaluate("=SumProduct(((Range("K2:K" & Lrow)=""Closed"") * ((Range("EG2:EG" & Lrow)=""60 Days+""))")
AC02 is an integer, as is Lrow (its a simple loop which works out how many rows there are).
View 3 Replies
View Related
Jan 17, 2007
I have 2 sheets (book1.xls and book2.xls) book1 has over 20 sheets and has my primary data. Book2 is for a report. The report I want to only display one sheet at a time, by me typing in which sheet to access.
What I want to have:
A2 = Sheet Name
C2 = ="'C:Excelfiles[book1.xls]"&$A$2&"'!$B$1" C2 should have the value from B1 on 'Sheet Name' from the file book1.xls
however, all C2 will display is the text, I cannot get it to actually do the reference. (appears as 'C:Excelfiles[book1.xls]Sheet Name'!$B$1 )
Is there a function to say, evaluate data output from another cell?
(less complicated example)
A1=1
A2=2
A3=A1+A2
A4=3 (formula to evaluate output of A3)
View 5 Replies
View Related
Jul 14, 2013
I am trying to perform a count statement in VBA as below, with the 1st Evaluate I get the correct response, however with the second option it shows a 0. The variable is obtaining the correct values as per the example of 6017Complete, this is proven with the MsgBox
VB:
Dim TillNo As String
TillNo = Target.Offset(, -1) & Target.Offset(, 0) & "Complete"
MsgBox "Till Number is" & TillNo
Target.Offset(, 10) = Evaluate("COUNTIF(C3:C123,""6017Complete"")")
Target.Offset(, 11) = Evaluate("COUNTIF(C3:C123,TillNo)")
View 6 Replies
View Related
Oct 27, 2013
can I put formula to cells on relative basis?
For instance can I write "=A1 + B1" and have a change event the formula populate for the corresponding column that changes? such that a change in C7 for instance populated the result of the formula for A7 + B7 in cell D7?
View 7 Replies
View Related
Jun 9, 2014
I have a ss that has item descriptions, quantities and pricing.
Item descriptions are identified by a letter (a, b, c, etc) and in cells C20:c32. These are selected by drop down box. Item quantities are in cells E20:E32.
I want to evaluate cells C20:C32 and determine what letter is chosen. If A is selected in any cell C20:c32 I want to count the quantities for A in cells E20:E32. I can't quite figure out how to do this.
View 2 Replies
View Related
Jan 7, 2014
First, I tried to input Ibs, Size, Items into a worksheet with layout.
Then, calculate how many items are they and separate them into two categories - "Big" and "Small".
Final, I would like to create another worksheet to evaluate how many items belongs to "Big" and "Small" with a column chart to present.
Question : How can I accrue the total of items and sort them into the right categories automatically.
View 3 Replies
View Related
Aug 26, 2009
I am trying to use an If statement and wanting to evaluate another formula.
The formula is as follows: =IF(B6>=7,Table!M16,Table!M47) where B6 =REPLACE(D24,1,3,"") which returns an integer. In this case it is 6.
Unfortunately it doesn't process the formula value correctly in the If statement unless the reference cell is hard coded with the integer. Is there a way to force the formula to evaluate the value of the cell formaula first before doing the If comparison?
View 4 Replies
View Related
May 19, 2014
I am currently working on creating a dialogue which will allow the user to input a range of worksheets to use for a pivot table.
I want the user to be able to input a variable into the dialogue. For example, I want the input "n-5 - n-1" to mean the 6th from last to the 2nd from last sheets. I am trying to find n - ([0-9]+)? and replace it with Worksheets.Count - $1. In other words, if there are 10 sheets, I want to transform "n-5 - n-1" into "5 - 9".
Here is the code I have so far:
[Code] ....
This has been working for strings like "n" or "n-4" but not "4 - n-3" or "n-5 - n-1".
Here is the code I use afterwards to interpret the string once the n's have been replaced:
[Code] ....
I'm new to Regex and VBA in general.
View 6 Replies
View Related
Apr 12, 2006
Is there any way to 'evaluate' a dotted number (similar to an IPv4
address but not just those) using standard worksheet formulae (ie no
UDFs, VBA, or ATP functions)?
To make it a little more complicated, I need to be able to evaluate
not just IP addresses (although that would be a use) but also a
'number' such as 9.0.2 compared to 8.7.5 so that they can be sorted
and / or compared.
The views expressed are my own, and not those of my employer or anyone
else associated with me.
My current valid email address is:
1bupdvc02@sneakemail.com
This is valid as is. It is not munged, or altered at all.
It will be valid for AT LEAST one month from the date of this post.
If you are trying to contact me after that time,
it MAY still be valid, but may also have been
deactivated due to spam. If so, and you want
to contact me by email, try searching for a
more recent post by me to find my current
email address.
The following is a (probably!) totally unique
and meaningless string of characters that you
can use to find posts by me in a search engine:
ewygchvboocno43vb674b6nq46tvb
View 10 Replies
View Related
Oct 10, 2011
I am trying to do this preferably not in a macro if possible. Basically I have a monthly metrics spreadsheet that pulls it's values from a data entry sheet. I setup the display sheet so that if there's no data for the month the cell is blank in order to avoid errors. So, now what I want is one cell that will update and tell me if the last month's metric was good or bad. So, I am trying to create a cell formula that will be able to find the last row with data. In this case it would be the row corresponding to September's data, then evaluate the value in that cell to see if it's above or below 90% = 0.90 in this case.
View 6 Replies
View Related
Feb 19, 2012
I have the following in VBA:
Code:
ActiveCell.FormulaR1C1 = _
"=mod_a1&"" ""&mod_b1&"" ""&mod_c1&"" ""&mod_d1&"" ""&mod_e1&"" ""&mod_f1&"" ""&mod_f1&"" ""&mod_g1&"" ""&mod_h1&"" ""&TEXT(mod_i1,""m/dd/yyyy"")&"" ""&mod_j1&"" ""&TEXT(mod_k1,""h:mm:ss"")"
I only want the user to see the string, not the concatenation formula. So how do I get VBA to turn this formula into an actual string.
I have seen some functions using ByVal and Evaluate with this sort of thing but this is just different enough that I can't figure it out.
View 4 Replies
View Related
